NorCal Mod: 2007-2013 Chevy Silverado (NO CUTTING!)

Got rub? Try this NorCal Mod for a 2007-2013 Chevy Silverado. We perform this on a 2008 Chevy Silverado with a 6 inch BDS lift.
Music:
Music provided by www.epidemicsound.com
Song: Be Free With Me (Instrumental)
Artist: Siine
Link: www.epidemicsound.com/track/C...
Song: Deserve It (Instrumental)
Artist: BLAEKER
Link: www.epidemicsound.com/track/Q...
**Social Media:
Instagram: / bmpowered19
Twitter: @b_powered
**Email:
[e-mail]
⚠ Disclaimer (Remember, we are idiots, not professionals)
Here at B.M. Powered, we are doing our best to prepare the content of our website and our KZbin channel. While we make every attempt to ensure that the information contained on our website or KZbin channel has been obtained from reliable source. B.M. Powered is not responsible for any errors or omissions for the results obtained from the use of this information. All information on our KZbin channel is provided " As-Is ". B.M. Powered cannot guarantee the completeness, accuracy, timeliness, or of the results obtained from the use of this information, and without warranty of any kind, express, or implied, including but not limited to warranties of performance, merchantability or fitness for a particular purpose. In addition, to the extent permitted by the law, B.M. Powered shall not be responsible for any losses and/or damages due to the usage of the information on our KZbin content. The members of B.M. Powered are providing this content on their website and KZbin, strictly for fun, hobby and entertainment purposes only. Any reliance you place on such material is therefore strictly at your own risk.

[@shawng7902]

This makes me feel a lot better. Mine hits on that center push pin. Literally need about 1/2" in the middle and I'm golden.

[@MXTT2001]

Very informative video. Just did 35s on my truck. Rubbin like crazy past 3 / 4 wheel turn! Will attempt this at the shop soon.

[@BMPowered]

Thanks! I will say that at full turn in reverse on a hill, there is slight rub, but not bad.

[@MXTT2001]

B.M. Powered yeah mine still rubs

[@elmntlgnd4995]

Thank you from Houston!

[@jmitchell513]

Nice work! digging that 71-73 "Clydesdale" you've got behind you! We had a 73 with a Cleveland it would blow the tires off of it

[@BMPowered]

Thanks! Love my 71 Stang. She still needs a ton of love. I'll get to it sometime soon and post videos. I also have a 351c for it. Can't wait to get it built!

[@jmitchell513]

B.M. Powered awesome man! is it a 2v or 4v Cleveland? either one is a bad s.o.b! My dad builds Cleveland's

[@BMPowered]

@@jmitchell513 It's a 2V. It's not ram air, but it will be when I am done :)

[@travispillsbury]

I have 35x13.50 on a 3 inch level. Do you think it will work for me?

[@JayyMoney-vr7nv]

What did y’all do with the plastic fender from the z71? Anybody?

[@johnwells2128]

Hey liked the video guys , I've got a 05 Silverado 2500hd crew cab 4x4 an noticed that the parking brake was hanging too low and pushing the fender well against the tire it looks like I need to do disconnected and try to pull it up closer to the frame in the body so the tire doesn't rub on it when turning left let me know what you guys think if that might be a good fix or just drop it off the mechanics and tell them what it needs and would that be something that they could do I think so

[@BMPowered]

Honestly, I'm not familiar with the 2500 only the 1500. Wish I could be more help.

[@johnwells2128]

@@BMPowered it's all good bro some times we have to discover new problems with on Chevy's LoL

[@user-kc2ul2rh8b]

@B.M. Powered That’s a beautiful dog

[@BMPowered]

Thank you. Her name is Blue and she is hilarious! You should watch our drone video. She has fun with it, lol.

[@user-kc2ul2rh8b]

@@BMPowered what breed?

[@BMPowered]

@@user-kc2ul2rh8b She was supposed to be a 20-25 pound Pomsky......but she is a 55 pound Husky, lol. Her mom was half Pomeranian, half Siberia Husky, her dad was full Husky.

[@youngboomerragevictim8857]

That's a nice alternative to the hack job cutting tutorials I've seen so far. I'm curious if you can really move it enough to get rid of the rub or if that's just mitigates it

[@BMPowered]

It still rubs a little in reverse and at full rotation. Not bad at all. I'm happy with it.

[@joshreeves87]

If it were to go off road it would rub a lot.

[@crazycar1423]

the face when he gave her the glasses

[@Channelslayer33]

If I got a 6inch lift on my 2011 Silverado would it stop my 22x12 on 33”s from rubbing ?

[@BMPowered]

Definitely!

[@user-pp1ju9zy1b]

couldn't you just add a 1 inch spacer to the bottom of the strut.

[@lxlozano5095]

Are you on 20’s? I just recently got 35’s. Haven’t slapped them on yet because of the cutting I thought I’d have to do

[@BMPowered]

I've since sold the truck, but yes. They did still rub a little, but not horrible.

[@lxlozano5095]

@@BMPowered did you have to trim on 35,s ?

[@BMPowered]

@@lxlozano5095 No, but I pounded a bit, lol.

[@bradywelsh7705]

I have a 3 inch level and just bought 12 wides what do you think I will have to do?

[@User-fm4ec]

Did you figure it out?

[@noegonzalez8646]

What size lift u got cuz I have leveling kit on mine Nd it rubs

[@BMPowered]

It's a 6in lift.

[@Imperial_Wing]

Sick truck! Diesel?

[@BMPowered]

Thanks! Unfortunately no.....one day! Lol

[@brendanperreault6732]

Will this work with 3.5inch lift riding on 12.5x33 -44?

[@BMPowered]

I've not tried that, but according to 4wheeldriveguide.com/how-much-lift-needed-to-fit-33-inch-tires-on-a-chev-silverado/ it should work.

[@brendanperreault6732]

@@BMPowered Alright, I'll give this a look. Thank you

[@alberto_el_tiburon9127]

Would this work on a 12 silverado w 33s on a 20x12 wheel ? My rub is bad rn truck on a 1” level 😭😳

[@BMPowered]

That's a tough one. It's possible. You may need some spacers.

[@alberto_el_tiburon9127]

@@BMPowered What u think would be better like a 4” lift or a 3” leveling kit ? Plus the NorCal mod (one you showed) thanks for the reply btw! 🙏🏼

[@BMPowered]

@@alberto_el_tiburon9127 3 inch

[@robertlowe29]

@@BMPowered Wheel Spacers will make it worse

[@ThatJerkFromCali]

What size/width Rim?

[@BMPowered]

22x12 35s

[@jerseyj973]

What size tires and lift?

[@BMPowered]

6 in lift on 35s.

[@jerseyj973]

@@BMPowered and it still rubbed, damn.

[@BMPowered]

@@jerseyj973 Yeah, some, but not bad. Only in reverse and more than 80% turn. I can deal with that.

[@joeedwards5598]

What size tires?

[@BMPowered]

35s

[@joeedwards5598]

@@BMPowered I got the same lift and truck as you do you think it would be too far of a stretch if I went 37s?

[@BMPowered]

@@joeedwards5598 Uh, I doubt they would work. You would need a bigger lift.

[@drbombay_ttv]

Tell blue I said hi

[@redman715]

No cutting 😂😂😂

[@Heywoodthepeckerwood]

Us hillbillies in central Oregon have been doing “NorCal” mods since the 1980s.

[@BMPowered]

Haha, nice! Love my lifted truck!

[@noegonzalez8646]

What size tires u got on ur

[@BMPowered]

@@noegonzalez8646 Sorry, should have put that in too. They are 35s.

[@ThatJerkFromCali]

You have made this same comment on multiple channels lol

[@Heywoodthepeckerwood]

@@ThatJerkFromCali spreading the truth. Californians steal everything..

[@pushungy]

Its not a Nor cal mod when u have a lift that's just stupidity the nor cal mod is intended for trucks That have no lift as wide and As low as posiblen

[@andrewb4311]

you have no idea what you are talking about.

[@DoctorRickSanchez]

@@andrewb4311 AT ALL

[@Heywoodthepeckerwood]

Actually the way we used to do it on lowered cars is. We would cut some reliefs in the inner fender an put a lead pipe on the dropped rigs tire and slowly pull forward. Rolls in real nice and even. Though we didn’t live in dumbfuckistan commiefornia.