iPhone 7 plus not turning on Data recovery. Crazy Short Circuit Finding.

[@Darren777Au]

Thank you. Enjoy watching.

[@ena6631]

Absolutely Fantastic. The Rosin part was really good too. Time is money, so wise decision. Awesome.

[@rodhester2166]

I cant express enough how much I enjoy your videos, Such a satisfying, educational channel and the jokes are hilarious to me...

[@tschupbach]

Love the use of the tools, I learn something every time I watch!

[@BuyitFixit]

Another Excellent Video. My repair video's aren't quite as intricate as yours yet! Great Job. Keep up the good work. I bought one of the voltage injection units after seeing them on your previous videos.

[@chromestorms7311]

Subbed cause you repair weird things. Keep it up! I learned a ton from northridge, opening my own shop soon!

[@stefanlechner]

Ohhh such an amazing video. Searching the problem by doing one step after another. Very well explained...great video. Thank you, greets

[@sharubamjoychandra5682]

My favourite Mechanic "Northridge fix"

[@brianredmond4919]

Took my first iphone apart a few weeks back - was stunned by how incredibly small the components are 🙀🙀🙀

[@tiporari]

Just a small suggestion that might help. Use compressed air or duster spray to cool off the board. It might make hot spots stand out more when large areas heat up and heat is spreading through the ground plane of the board.

[@minipolenet]

Freon gas was replaced with flammable butane gas. To prevent explosions, you need to buy diagnostic freeze sprays. This is nonflammable . This has long been used by electronic developers as low-temperature stress testing and repair tool. Spray the surface of the PCB until the ice freezes, and the first melting part when the power is connected is the faulty part.

[@MMGsimon]

Good job as always Alex

[@hardtonik5305]

Always learning! Thanks

[@EmbracingVGC]

Uploading at 4 am california time. Goated.

[@jessearrazola4283]

Mr you are amazing thanks for sharing your experience, greetings from Colombia!

[@AbdulRehmanF2007]

he's so perfect in his job

[@lasciencedelamusique6245]

Hello, I really enjoy your content! Thank you from Québec :)

[@gnamewname8553]

"To cringe is good for you, it refreshes the blood". Absolutely golden.

[@Bimmedroid]

Hi Alex. From what i‘ve seen your board is jumping straight to 240mA after pressing power button. Check tristar. It usually generates some heat when it fails like that.

[@yoelrenarky9044]

happen to me as well

[@NorthridgeFix]

The first thing we do is check Tristar, replace battery, charging port, screen and disconnect cameras. . Normal procedure.

[@RR-SF]

Last ditch effort to replace tristar. Many times I’ve also had pulsing pmic using thermal camera but it did not pick up heat on a shorted capacitor near nand. Used freeze spray and melting very slightly on a nand capacitor.

[@sandeepmaurya3888]

Which software are you using for diagram

[@dhfixlaptopaffairs]

THE SHORT, IS GONE...ME LOVE THAT PHRASE SIR

[@fhshakayt2505]

Hey boss. Just want you to know that you looks good when you smile. Just don't feel bad if anything doesn't get fixed. I know you can fix it. Cheers 😇❤️

[@Rodox2k10]

Board: _HA HA! Find the short now, Mr. Better-than-factory!_ Alex: _OK. No problem._ ¬¬

[@wtech6249]

Which board diagram do you use Mr Alex?!

[@will.iam0084]

Nice work even no fix!!!

[@elmaestro6669]

Have you had any success with the CPC4 from a Freightliner Cascadia?

[@JeremieDuthil]

it seems you have a real ripped pad on last column, third row, but don't know if it's related to the issue.

[@NorthridgeFix]

Yes common issues with 7 and 7+.

[@angnguyenhong3020]

wish you were in vietnam. you are very good, thank you...

[@rylar717]

How did you obtain the iPhone board diagram?

[@blackbird9571]

Yes how?? Please can some tell us

[@gomaajr.2629]

Search phoneboard

[@adiposerex5150]

Excellent work.

[@chumatez]

Nice work, Not all problems must be solved maybe this is one of them

[@mjmeans7983]

It that was a crystal next to the cap, and the cap is a bias cap, removing it could make the crystal frequency unstable or fail to start oscillating.

[@mojhajostechnique]

amazing technique🇵🇭😊

[@worroSfOretsevraH]

Quick question: is that magnifying glass of any good? Once I've looked into one and got sick. It was so bad. I saw double image trough it.

[@emilong]

(to the tune of "the heat is on") "The short is gone" 🎶🎶🎶

[@ThePollito6171]

Hi, When You Accept Graphic Card for Repair.?

[@ReelaxedOutdoors]

When you were measuring the compacitors using diode mode on your meter; what did you have the other meter lead connected to, just curious?

[@madab8u]

Other side is connected to ground

[@suryavanshib]

Awesome ✌🏻✌🏻✌🏻 Better luck next time ✌🏻✌🏻✌🏻

[@mariwa5286]

How do they weld it so perfectly

[@redsunmtm]

well done ! just a remark sound is very low !!!

[@NorthridgeFix]

Check your speakers

[@redsunmtm]

@@NorthridgeFix in fact i use a headphones, and if i tell you that it is because all other channels are approximately the same level all day ... and when i watched your vid, i had to move up the volume and when after i went to another channel i had to reduce it back... it is for you i am telling it... it doesn't bring me nothing to lie to you... cheers...

[@thebrain7693]

@@NorthridgeFix Check your mic and don't be an a** lol

[@alejandrocorrea3915]

thank you for the knowledge and great videos

[@mikhailmalyar7977]

Great video. What tool are you using at 5:00? Is it a multimeter or something else, because I didn't see another prob

[@calvinnitzel4178]

Multimeter with ground probe off-screen

[@christopherjackson2157]

One day I'll be able to do repairs as confidently and quickly as you do. But it won't be any time soon lol. There's no replacing years of experience.

[@katumba-techkigali1031]

Great work

[@SubjectiveFunny]

Nooo... I hate when I dont get to see a resolution :( Feels like my OCD is kicking in...

[@renzojohn06]

This is what I call burnout or lack of time just like my post on the forum. 😉

[@thegreenemachine5585]

I'm a big fan of your videos, I would like to get into repair and micro soldering myself. When repairing a gpu, say there is a missing or terribly damaged resistor. Where do you find what to replace it with? Do you have access to diagrams?

[@diogofigueiredo7552]

Thank you

[@jeffic0730]

One pad missed with connection. The very right one close to the TOP side.

[@ctecrwp]

Alex.why not use that Uni t heat cam, you revied it and had much better result.

[@NorthridgeFix]

I already have a thermal cam, and Atomizer, Having another thermal camera is a waste.

[@SONNYemc]

So basically the first problem was found by chance or is it related to audio chip overheating? please let me know

[@NorthridgeFix]

The first short was discovered because of the audio ic, otherwise I would not have looked there.

[@ENGHHO]

Good for you

[@FilmFactry]

In the future repair technicians will develop built in thermal vision, and will be able to detect shorts without any equipment.

[@payusavisit3482]

I'm a big fan

[@FSHerrante]

Can be this called... "Premium short circuit"?

[@melstead3981]

Alex, the scientist are busy on this video. They just can't help themselves. Personally, I will wait for you to have your second look.

[@pcvitamins]

0.6 amp means its in DFU mode i can tell u this from years and years of experience :)

[@NorthridgeFix]

0.6a is usually short when it comes to iPads. The DFU assumption doesn't do me any good.

[@alialshams1043]

nice Vedio ☮️👍

[@na6alnikeneme]

"If you cringe - it's good for your health! It refreshes the blood in your body"

[@72pinkush]

power of board diagrams

[@abdalothmab9632]

Boss for repairng apple 🍎

[@Shogoeu]

Sometimes things are unfixable, unfortunately.

[@dafalzonAUS]

I’M NOT THE BAD GUY!

[@shamsalfaisal]

Came in for no power.

[@wouterjanssens]

Damn interesting

[@ovalwingnut]

"Must See TV is Back, baby"

[@ukaszs5021]

👍

[@derekwray1058]

That looks like a meth pipe, the Rosin Tool haha crazy, we know we know what you are really doign with that mr NORTHRIDE

[@grandprime7397]

Short circuit short circuit short circuit.. I dont like it i avoid but, Short circuit likes me.

[@sidiberhili9248]

😙😊💕😊

[@CrAzZyTheCodingBoss]

*cringe intensifies*

[@rafathali1999]

First 😊