Not your Average C5 Vette

[@CoDbyHaZe]

Love the build I’ll try not to copy it exact 😂

[@ZeRoXceLzYn]

lol sounds good

[@skouria3135]

Fr.. I say this and INSTANTLY said yup dull gray is the color I’m going with 😂😂 TRYING NOT TO COPY THO

[@alkingtorres1644]

Me too

[@davidramossalsologoporexse2469]

Simply beautiful

[@theview911]

I said the same thing but I might just get a ash tray gray 💯

[@thebeaststi4300]

Love what you did. Honestly makes me want to get my own and make similar modifications. You did it well.

[@ZeRoXceLzYn]

Thank you so much!

[@FerRod2113]

This is the baddest C5 I’ve seen yet! Tastefully done for sure

[@ZeRoXceLzYn]

🙏🏻🙏🏻 ty so much

[@skouria3135]

And also the r888r are amazing. I got them on my c5 and NO spinning at all. No matter the tire if I turned trac off it would spin almost every gear. R888r is the god tier tire for me so far

[@ZeRoXceLzYn]

I have heard the R888 r's are the way to go, how much power are you pushing with your setup?

[@troycruse]

600’s they work anything above that Mickeys all the way

[@aj1201]

On my c5 , i just went with the top rated Michelin 4S in oem size. I can easily break traction and in reality W mods, im probably at 415 hp. My car is plenty fast w mondtor torque. I can easily break traction but the tire excels in predictability and wet conditions. Lateral g force slides are easily corrected. Road noise, durabilty & comfort are excellent.

[@randallnorwood398]

Spookiest tail lights in all of the sports cars. Can't believe they got rid of them.

[@ZeRoXceLzYn]

Agreed!

[@Nick_69srt]

Are those black covers over the taillights?

[@cedricedemps]

Damn that's a killer I have a couple of C-5 that I've done and they've turned off fantastic I haven't seen anybody do it better than yours

[@ZeRoXceLzYn]

🙏🏻🙏🏻 ty so much

[@JWsGarage]

Nice compressor hide!! Thank you for a sub. And the lime calipers look awesome with the mat camo.

[@ZeRoXceLzYn]

thank you so much! No problem at all, I dropped you a sub as well

[@JWsGarage]

@@ZeRoXceLzYn seen that. Thank you.

[@93tegDA]

I can't wait to own a Vette of my own....

[@ZeRoXceLzYn]

Hope the values come back down a bit. They are great cars

[@vtwinpower1903]

I got a 2001 zo6, procharged n meth injected, 4 corner coil overs, full exhaust. She's only on 6lbs of boost making 665 rear wheel hp. Ran 10.01 -140mph. Shes got plenty more if needed!..34.000km on her now. I'm 60 yrs old n KING OVER HELLCATS, MC CLEARNS N BLEW OFF A 😈DEMON!.... The old guys suprise!...🤣😎

[@petebutler5139]

I’m a C5Z owner, sending you mad respect from ATL Georgia ✊🏽👊🏽

[@ZeRoXceLzYn]

Ty so much 🙏🏻🙏🏻

[@villyrivera6856]

I have a C6 Moded Grand Sport and was thinking of getting a C5 as well to toy with... Nice mods !

[@ZeRoXceLzYn]

Highly suggest it

[@thedavid3737]

Looks a lot like my vette except mine is manual! Love these cars

[@wackysamurai1583]

Can’t wait to get mine next month or so! Smoked tail lights look sooo good!

[@ZeRoXceLzYn]

Smoked tails deff look great!

[@mexdrago3009]

I never looked at this car when I was younger. I never saw the slanted rear window growing in person. I now want one.

[@Nigel74587]

Sweet car! It really looks nice. Its crazy how your car is supercharged but still makes less power than my old C6Z06 LS7... I was making 623whp 590wtq and all motor NA lol 😂 I miss that car!! I had to sell the C6 for financial reasons so I ended up getting into a C5 which is what I drive now. I gotta say not being nearly as fast as my old C6Z I still love the C5 for what it is. It's an amazing sports car. Cheers!!

[@prostreet85c10]

i have a c5 on air ride also. it was built in the early 2000's. custom done, kits werent available then

[@derekdyer3929]

Makes me miss my C5.

[@sirliftsalot1154]

I almost bought a 2001 convertible recently that had a Paxton Novi 2000, blower cam, heads worked, and upgraded clutch etc. It was tuned to about 627hp with the restrictor still in. I didnt buy it because I didnt know how long the differential was gonna hold up with sticky tires. Looking at used Tesla Plaid and Tesla model S P100D now. Cheapest speed I can find and luxury all in 1.

[@seguridaddigitalmexico3975]

That's a true work of art what you have sir, congratulations. What tire sizes and brand are you using? For the calipers, you use the oem master cylinder? or bigger.

[@ZeRoXceLzYn]

Thank you so much, I really appreciate it. Mickey Thompsons SS's in the rear 325/30/19 Nitto's in the front 275/35/18

[@raymondsalazar5291]

sounds like the country roads we have in Texas, when the county is in charge for repairs holes dont get filled fast. I have a 03 Z06 second owner.

[@ZeRoXceLzYn]

Nice love the Z body style

[@misfiringpistons]

Not much a fan of the camo but still a great build none the less!

[@ZeRoXceLzYn]

No worries at all, thank you so much 🙏🏻🙏🏻

[@nickmathis8438]

Shits hard asf but that’s your opinion

[@misfiringpistons]

@@ZeRoXceLzYn Yah man no worries, sick C5!

[@Chevdriver]

normally no camo fan either but its very subtle looks nice

[@blaschavez6560]

This is my favorite generation of corvette

[@DjKamikazee]

Nice vette you gave me some ideas what to do with my c5

[@ZeRoXceLzYn]

Ty so much!!

[@Mxman56116]

My dad just got a corvette c5 they sound amazing

[@ZeRoXceLzYn]

They are great cars for sure

[@thomasdecker2319]

Awsome Job. Real Great

[@MegaGyalis]

Love pop up headlights

[@ZeRoXceLzYn]

Thats what makes a c5 awesome!

[@konigwhetzel8087]

Dope C5 bro!!! 🔥🔥🔥

[@ZeRoXceLzYn]

Ty so much 🙏🏻

[@larrymoore7160]

Beautiful!!

[@trevormallett750]

Beautiful corvette :)

[@REAL4wd]

Beautiful car

[@ZeRoXceLzYn]

Ty 🙏🏻

[@matthew6202]

What is the wheel offset

[@wubangazz]

Where in Jersey are you? I’m in Middletown. I would love to see this thing at a car show.

[@ZeRoXceLzYn]

I’m Monroe area. The car will be at Jacob javitz center July 2nd. It looks a little different than how it was in the video

[@wubangazz]

@@ZeRoXceLzYn nice I’m in Middletown

[@rockod8880]

Nice build

[@corvettesupercars902]

Really Really Nice C5 WideBody 🙌🙌

[@ZeRoXceLzYn]

Ty 🙏🏻🙏🏻

[@AlinB1108]

Nice all around but really digging the wrap or paint, which ever it was.

[@ZeRoXceLzYn]

Ty 🙏🏻🙏🏻

[@halkyxn]

Consider looking into ITB as well!

[@troy8940]

You say original motor was swapped out, so how did you wire the ls3 to 2000 factory harness ? Are all dash lights clear ? .I want to swap but I'm looking for the best way to do so ,, safely. Can you help. I have same year as you.

[@WitherstormGamingOfficial]

Nice ride. Where did you get the rear deck spoiler?

[@ZeRoXceLzYn]

C7 Carbon. Its their Carbon Race Edition

[@keyvobless]

Great looking Kar

[@stopit6847]

Dope corvette bro.

[@johnmcnulty516]

Awesome build 🔥

[@josels1292]

How much money do you have in this? Also what is the quarter mile time? I also have a c5 but really have the itch for a new 1le camaro SS. Not sure if I should go with the Camaro or spend some money on the C5 and get it to look and perform like your C5.

[@ZeRoXceLzYn]

Easily over 45k now. The 1LE is an amazing machine. If you can afford it go for it

[@renis001]

nice c5 👍🏻 Dude what wheels on your c5 ?

[@zonapainter]

How could you possibly know how many C5s have air ride?

[@ZeRoXceLzYn]

The kit is advertised for a C5/C6. The fitment really plays more to C6 vettes as the frame rail mount location is different in both cars. When doing the install I couldnt even obtain pictures of C5's with the kit on the car from the manufacturer. All pictures provided were C6's, you actually have to swap rear control arms to C6 to get them to clear. In my research I have found about 5 others with the kit on their car all had to do similar modifications as I have done to make the kit work.

[@MrMcBlond]

what offset do you have on the wheels with the wider fenders?

[@fernandomarquis912]

Yes I'm interested in size in back

[@sund5]

Very nice! Are the front fenders wider than stock? If they are, are they just rolled or completely changed for wider ones?

[@ZeRoXceLzYn]

Completely changed and they are 1.25” wider than stock

[@sund5]

@@ZeRoXceLzYn thanks a lot. A wide body C5 is fucking cool! :-)

[@Megacatares]

Rowdy!

[@JoseOrtiz-yq7xl]

Sup bro, was just curious on where u got the spoiler from since I've seen that style and really like it

[@ZeRoXceLzYn]

hey man, got it from C7 carbon

[@cjct86]

Car looks good bro. I live here in Jersey also, right by toms river. I also have a 600whp supercharged car with 30k in work done to it. Where about do you live?

[@ZeRoXceLzYn]

That’s awesome. I live in the Monroe area

[@husthebountyhunter5269]

Nice build bro where do you find that bar in the back for seat belts I don’t have one my seat isn’t secured need help thanks 🙏🏽

[@ZeRoXceLzYn]

Brey Krause harness bar for C5. Direct bolt in

[@santossuarez]

what wheelsare those? beautiful!!

[@stevieanderson7281]

Nice!!

[@MF-Rell]

Bro, I've seen some bad ass C5s in my day but that shit is nasty. I'll give you a A I would give you an A+ but you don't have a license plate cover in the front 🤣🤣🤣. Real talk tho awesome build bro.

[@ZeRoXceLzYn]

🤣🤣🤣 ty bro. I did take it off and cut a hole in the front bumper for cooling

[@MF-Rell]

@@ZeRoXceLzYn 😤😤😤💯💯💯 you an IG I have a question about the offset on your wheels.

[@ZeRoXceLzYn]

@@MF-Rell yep ig:ZeRoXceL

[@corvettesupercars902]

I live in Halifax Nova Scotia so are roads are the same!

[@ZeRoXceLzYn]

I put the kit on with a friend. It is Airtekk bags and air lift 3P for management

[@davidgaunt5539]

Bad Ass, love the flat gray, hope you listen to rock and roll, cause ………🇺🇸

[@c-portraider7411]

Stock rear end? Gear ratio or rear diff mods? Stall? Sorry for all the questions just curious. Amazing car and Amazing build.

[@ZeRoXceLzYn]

Stock rear end. 2.73 Gears, 3600 yank stall

[@c-portraider7411]

@@ZeRoXceLzYn thanks for replying. Again awesome build beautiful car. How are the street manners with that gear and stall setup

[@ZeRoXceLzYn]

@@c-portraider7411 🙏🏻🙏🏻 ty so much. I like the setup right now, it’s comfortable to drive every day and puts the power down when I want it.

[@davegerena9854]

See the Jersey plates.. where you located? Have a c5 as well

[@ZeRoXceLzYn]

Monroe area

[@davegerena9854]

@@ZeRoXceLzYn not to far at all man. I’m over in Piscataway

[@MS-mr4zm]

Great build man. I feel like you should/could be making more power for sure, I have a built LS6 in my car (cracked a few piston rings when I initially had A&A blower installed & had cats plug exhaust) w/ forged crank custom cut pistons stage 2 blower cam etc w/ dual meth injection similar setup & car made 718whp on a stingy mustang dyno. Has the shorter pulley. The LS3 w/ same setup should make more power. You def need high pressure fuel pump. I have dual fuel pumps & 80 lb Bosch injectors not sure if that makes big diff or not.

[@ZeRoXceLzYn]

I did an updated video, the car makes around 740 wheel now. I needed a fuel system to support the car, stock pump plus boost a pump wasnt cutting it

[@CT-pc3rh]

Bro.that is sick.my o3 Cobra is air ride.

[@ZeRoXceLzYn]

Thats awesome, do you have an instagram, I will drop you a follow

[@CT-pc3rh]

@@ZeRoXceLzYn I don't bro.thinking about starting one

[@ZeRoXceLzYn]

@@CT-pc3rh you should, would love to see the car

[@CT-pc3rh]

@@ZeRoXceLzYn sorry bro just seen your post I'm on the road a lot for my job but I do wanna do more with the car.

[@ZeRoXceLzYn]

@@CT-pc3rh don’t be sorry man, life, work, family, all super important. If you make an Instagram send it my way, I’ll drop you a follow

[@darrylsjodin7184]

Looks and sounds great! I have a stock 03 C5Z with a cold air intake. Hot enough for me but definitely not as hot as yours. For sure a lot less money!🤣 You keep saying “we” did this or that. Do you have a team working on it? It does look like a lot of work! What size are the rear tires?

[@Only1English]

Dan what brand is the rear spoiler on this beautiful Vette that you built

[@ZeRoXceLzYn]

C7 Carbon race edition

[@Only1English]

@@ZeRoXceLzYn Thanks bud. Happy Thanksgiving to you and your family.

[@ZeRoXceLzYn]

@@Only1English ty so much. Same to you 🤝

[@herbertwalker167]

Nice

[@PONCESVETTE]

EL WING QUE LE PUSISTE DE FIBRA DE CARBONO ES DE LA COMPAÑÍA C7 CARBÓN?

[@TheTmshuman]

My Novi 1500 maxed out at 704RWHP uncorrected on a mustang dyno at 11 psi on my forged TSP 427. Stock C6Z exhaust manifolds and first cats with borla attack behind. You can spin those to Novi’s to 65,000 rpm but they run out of steam up top if you do that, or at least on a 427 they do. Just get a YSI V7B and an A&A 8 rib and be done.

[@ZeRoXceLzYn]

I know a bunch of people running 850-900 whp on the Novi 1500. I don’t think I want to get to that range, maybe 700-750 and stop there

[@88harrold]

Hello awesome vette are those tires 325 in the rear

[@ZeRoXceLzYn]

Ty man, yes they are. 325/30/19’s in the rear

[@alexmatheny9295]

What spoiler is that youre running here? Thats exactly the style I’m looking for for mine.

[@joeldf1969]

What size rear rim and tire with offset and back space are you able to fit with the corvette creationz quarter panels

[@yahirjaimes5515]

What’s the name of the wide body kit?

[@ZeRoXceLzYn]

Corvette Creationz

[@PhamVans]

She's a beaut, I think every man can appreciate a murdered out Vette, especially with some jam under the hood. Question though, is it actually an Automatic? Lol.

[@ZeRoXceLzYn]

Thank you and yes the car is an auto. I was on a budget when I was looking for a car

[@njhgv9192]

what year is it? also what spoiler is that, and where can I get it? also where are the vents in the skirts?

[@ZeRoXceLzYn]

2000 C7 Carbon Race Edition. You are talking about the brake ducts?? They are only on Z06 cars. Mine isn’t a Z06

[@njhgv9192]

@@ZeRoXceLzYn ok thnaks for the spoiler! yea im talking abt the brake ducts

[@jmaud1233]

What is that brace in the video at 2:00 right in front of the air tank? Is that a strut tower brace?

[@gopro2027]

I'm developing some custom taillights right now if you are interested! The prototypes are on my channel. I love your car and if you like my taillights I'd love to see them on your c5 ~ This car is a perfect setup and stance already tho

[@ZeRoXceLzYn]

I have been really interested in infinity style tail lights. Do you have an instagram?

[@gopro2027]

@@ZeRoXceLzYn I'm not sure what happened, I just tried to comment and I think youtube flagged it lol. My personal insta is tylersonger1 , look at my most recent post you'll see I launched my website yesterday for the taillights and the instagram for the site.

[@dominicsampaulesi2793]

If you don’t mind my asking how much did the airtek with the management system and c6 control arms cost you in total with install

[@ZeRoXceLzYn]

Kit from a dealer was 2850. Installed with my friend

[@tymiernicki]

@@ZeRoXceLzYn how was the install? looking to do it soon

[@MrKarlfebel]

Digging it big time!

[@ZeRoXceLzYn]

Ty so much 🙏🏻🙏🏻

[@rctwist]

Who makes that seat belt harness bar!?

[@ZeRoXceLzYn]

Kraus harness bar

[@PheonixStar]

What fenders are you running, it gives your C5 a very nice wide look.

[@Axel-lb9gi]

They are carbon wide body fenders.

[@BJnCars]

How's your transmission temp? Mine is N/A and running at 230 degrees

[@ZeRoXceLzYn]

Mine runs 200-230 and that’s running hot. Recently had fans put on the trans cooler so hoping the temps come down. You should look into a trans cooler

[@BJnCars]

@@ZeRoXceLzYn okay cool I will, do you have the trans cooler mounted in front of the condenser?

[@ZeRoXceLzYn]

@@BJnCars normally it’s in the front but because I changed a bunch of stuff up on my car I went to a custom rear mount setup

[@BJnCars]

@@ZeRoXceLzYn ah okay, thankyou for the tips and responding lmao. I will definitely see how mine feels at higher speeds and try a trans cooler

[@SkynetT800]

Is there a paint job or wrap? And what is the style and color called?

[@friendlyneighberbob]

just wondering if you had the time if you could list all your mods?

[@ahmadmorrow2749]

Do you have to worry about the 4l60e trans in stock form if your doing just catback exhaust, long tube headers, and a tune?

[@ZeRoXceLzYn]

No, i ran stock 4L60E on my head cam car making 400 wheel. Never had an issue

[@ahmadmorrow2749]

@@ZeRoXceLzYn thanks!

[@matthewm325]

Only 602whp with built & blown 6.2 ??? Seems awful low. It's a nice build just expected close to 700whp. My built h/c/I ls1 with 250 shot is 712whp Those wheels are sick but do the skinny tires grip?? What's weight of car? I was thinking lighter front & rear quarters for weight reduction

[@ZeRoXceLzYn]

It deff was low, the car needed a proper fuel system. I had a different pump put in and the car was retuned and put down 743 wheel. I put a follow up video about it. I am running r888’s right now and they do not grip well at all. Not 100% sure on the weight but the carbon vs fiberglass wasn’t much of a weight savings. They are both light materials

[@matthewm325]

@@ZeRoXceLzYn yea nittos don't grip well for me either. Had to go MT ET radials 305/45/17

[@MrPontiacws6]

What about the sleepys???

[@ZeRoXceLzYn]

So many mods I left out… still getting use to being in front of a camera… sleepy eyes are deff one of my favorite mods

[@idk-ir6vv]

I mean absolutely no disrespect by this, because I really like your car, but mine is the stock 5.7 with just a cam, running the same supercharger, and 10psi. Making 600hp. With that 6.2 you could be making alot more. My plan is to build a 6.0 or a 6.2 for mine soon, as well as straight cut gears in the tranny. I should be pushing 800hp at the minimum.

[@Duece-_-]

can you link to where you got all of your exterior parts

[@mrmoss149]

New drinking game- every time he says " uh"..... Wait.... Shit. I'm out. 😆😆😆

[@onenineeighty1501]

are the carbon front fenders wider than the originals and what brand are the carbon front fenders ???

[@ZeRoXceLzYn]

Corvette Creationz

[@ZeRoXceLzYn]

Yes they are wider than stock

[@onenineeighty1501]

@@ZeRoXceLzYn thank you

[@slumptyt9853]

What spoiler is that. I want it

[@redvette2466]

Is that a stock 4l60E transmission? And what mufflers do you have?

[@ZeRoXceLzYn]

No that’s one mod I forgot to mention, it’s a performabuilt stage 3 trans. Capable of 900whp

[@ZeRoXceLzYn]

OBX exhaust

[@redvette2466]

@@ZeRoXceLzYn wow thats badass

[@YoJoe-s4b]

Bahahahaha, bro like 6 dude in one city got air ride on their c5

[@ZeRoXceLzYn]

Look at the date this video was posted 😂😂. I was literally one of the first cars with it

[@teedoxuluakiola5218]

Thought it was mike mykes vette for a second

[@ZeRoXceLzYn]

He has a great car and happy to see him making amazing content with his C5.

[@Undeniableboyz]

What is the name of the vinyl wrap

[@ZeRoXceLzYn]

Shadow Camo by Avery bought it off Metro Restyling a few months back

[@Undeniableboyz]

Hey… thanks for responding

[@Tappata21]

I might actually make mine a camo or a marble on one side and black on tge other side

[@ZeRoXceLzYn]

That will look cool

[@fombabills4522]

Where did you get the spoiler and side splitter?

[@ZeRoXceLzYn]

Spoiler is C7 Carbon. Side skirts are custom made by Galvez Customs

[@fombabills4522]

Thanks man!! Love the car!! Just bought a full built one as well haha doing 486whp

[@ZeRoXceLzYn]

@@fombabills4522 ty man, congrats!!! What color C5 did you pickup

[@josels1292]

What is the name and size of the wheels?

[@ZeRoXceLzYn]

Forgestar F14's 18x10 in the front and 19x12 in the rear. Offset to allow for big brake kit!

[@rudydominguez7183]

@@ZeRoXceLzYn what's the offset you used?

[@proudinspector]

Thats a beaty of a car

[@ZeRoXceLzYn]

Ty so much!

[@rickgarza45]

Can we get the wheel offset please

[@TheCechristopher]

I need to see that thang move… that could just be a bag of bolts.

[@ZeRoXceLzYn]

It moves but not on bags anymore

[@corvettesupercars902]

Who did the AirRide for you

[@ZeRoXceLzYn]

I did it with my friend

[@michellabao192]

whats the wheel setup?

[@semajclark1143]

What rims are you running

[@ZeRoXceLzYn]

Forgstar F-14’s