NOVA RIDE CERAMIC OSPW *$240 USD* (BETTER BUY THEN CERAMICSPEED OSPW???) WATTS SAVED?!?!?!?

[@costasmandylor1565]

The most important reason for spending $$ to upgrade parts on your bike is because they look cool!

[@GCPerformance18]

Obviously. That’s the only reason lol

[@domestique3954]

AND they have to be light and aerodynamic. In a crosswind these pulleys are like a sail.......eating the watts you might have saved🤔 I just put 42 mm oversized blue pulleys in my 7800 Dura Ace cage 😂

[@bobridestwowheels]

Wouldn’t the 5 grams be a wash when you factor in the longer chain?

[@GCPerformance18]

Hahhaa honestly..... yes

[@cameroncox5253]

While the weight is more than likely a wash, you need to also take into consideration the amount of chain resistance you will save by going to the ospw. It's not always about the weight, its also about the efficiency

[@kge420]

Have to factor in your lighter wallet too.

[@najiinaj8263]

Something about a fool and his money.....

[@GCPerformance18]

@@najiinaj8263 lmao

[@theobuzat9091]

Ahh showing France some love I see ^^ next you need to get your hands on Corima wheels or Mavic and of course the last "hand-made" bike IN France, TIME cycles with the Alpes d'Huez 01 and the Skylon 😁 As a frenchie myself, I'm happy you give France some love, not a lot of people (outside of France) appreciate our products 😔

[@GCPerformance18]

One of my best buddies who I use to work with at the shop was from France, great guy also we get a lot of French Canadians 😁 but yes you guys make quality products and great riders lol Julian

[@theobuzat9091]

@@GCPerformance18 We do!! But sometimes their are not appreciated ^^ take Mavic wheels for exemple, a lot of people hate them because of the freehub they used for a while (duranrider is one of the haters) but Mavis as since changed it to a DT-Swiss like system with the ratchets inside, but when I looked up some review, the comments were just awful...(btw the freehub I'm talking about wasn't that bad, but people serviced it with greased which cause the paws to stick). And you're right we do have great riders, Julian being of of them, but he also receives a lot of hate lol. We also have guys like Pavel Sivakov, from Ineos...He's now under the russian flag but he was raised in France with a french mother or father can't remember. Anyways thanks for the vid as always ^^

[@intayonlakay8230]

I feel the same way you do. I’ve been debating on buying ospw basically for aesthetic look because it makes me feel good but it’s too expensive. Now that I see the NOVA,definitely will check it out for my new bike. Thanks for sharing.👍🏼

[@GCPerformance18]

your very welcome and yes give them ca check out they make nice stuff for sure and very similar to ospw

[@ryanglahs8692]

Looks awesome, definitely going to add this to the list for my next build.

[@GCPerformance18]

Yea it’s a nice product and very affordable

[@Robert-mn8gc]

GC , what's the weight difference between the NOVA OSPW weight difference between the Dura Ace Cage pls . I have just built up a SL7 S-WORKS . Final Weight with my Race Wheels on is 6.83 ... 52 /60 . Weight included Pedals, Bottle Cages & Computer Mount . 6.98 with 52 /60 training wheels training tyres ( Clinchers) & 6.91 with CLX 32 Climbing Wheelset training tyres ( Clinchers) on all Roval Rapide CLX . Have a FSA VISION ONE PIECE CARBON COCKPIT. As the Specialized Carbon Cockpit wasn't/ isn't available in australia as yet . Would be under UCI weight with the Specialized Bars on by approx 40 grams 🤔

[@GCPerformance18]

I dont know the exact weight but I know the ospw is more heavier

[@Robert-mn8gc]

@@GCPerformance18 Thx GC , I did check ✔️ it out futher last night & yep u r correct. Won't put one on . Maybe The Jockey Wheels only

[@industryrule-4080]

The spin test makes me think the bearings in a fidget spinner might be a worthwhile exploration. 😂

[@GCPerformance18]

Hahahhaha it could be something there

[@lexist2112]

I’m a fan of exposed carbon and like yourself, like to set myself apart with some bling and free watts!!👍

[@GCPerformance18]

eggzactly just a little nice piece for me to be happy :)

[@lexist2112]

@@GCPerformance18 keep up the great content!! Look forward to new stuff you release and your inside knowledge and real world perspectives!👍

[@abcar7530]

It was nice to see the installation...great video as alwais

[@GCPerformance18]

do you want me to show how to install it? its very simple

[@abcar7530]

@@GCPerformance18 It can be precious for the biker Who wont to try ti install It at home

[@ethanwong1395]

Hey man, suggestion: you should split your vids into sections or as YT calls it, “chapters”. That way it lets me and others follow along and know where we are in the vid or if someone for instance wants to skip ahead to the test, they know where to go. It is used a lot in tech reviews but makes the vid look cleaner.

[@GCPerformance18]

oh very nice I seen that im gonna ahve to take a look because that makes alot of sense

[@cookiepuss8182]

Very cool and great price. Wish they had one with black wheels . Also congrats on the path to 6k !!

[@GCPerformance18]

they have a silver and they are coming out with a full carbon wheel

[@cookiepuss8182]

@@GCPerformance18 yeah the silver would look good on all black but might wait for the full carbon one then . Price is great for them compared to ceramic speed .

[@jascollinscork]

Fantastic video..... was looking into a oversized derailer ..... thanks for the information!!!

[@GCPerformance18]

your very welcome thanks for watching and I hope I helped :)

[@MIAthe305]

I LOVE the look of the exposed CF!! Man I wana get one of for my bike but I’m still a beginner rocking 105, so I’ll wait till I upgrade to a nicer bike with Ultegra and then definitely getting one of these

[@GCPerformance18]

It’s a sick looking part. I like it and gives the bike character

[@qibble455]

@@GCPerformance18 This makes sense. It does look cool af..Just makes me mad about all the watt saving bs.

[@movem1]

Dag. That looks high quality and incredible paired w this bike 👍

[@GCPerformance18]

yea the blue matches sickkk

[@MrDinodeal]

Great video thanks for the info. Going to order one for my Madone

[@GCPerformance18]

:))) awesome thanks for watching

[@PatrickLino]

Thanks for the upload bro. Is the installation straight forward? I built my own custom bike so I have all the required tools, just curious if there is anything I should look out for. Thanks!

[@GCPerformance18]

The only tool you will need is a t10 wrench and a chain tool to remove the chain but yes very easy 😁

[@alexgleeson3634]

I’m a big fan of SLF Motion...really good products

[@GCPerformance18]

😁😁

[@andersnyberg4034]

My pulley wheels from them wasn't lined up. Vobble when you spin them up.

[@250dpi9]

These OSPW honestly looks very cool idk y most cyclists hate the look of it

[@GCPerformance18]

yea its all preference im a huge fan of them

[@2endsformacircle762]

Amen brother! All about the ascetics!

[@GCPerformance18]

all about it :))

[@arzemagic]

How will peddling harder have any effect on that derailleur I’m not talking about how free the bearings are and how Spinny it is

[@nafizz1701]

If I'm not wrong you have a sl7 as well, can you please do a comparison between the sl7 and aethos?

[@GCPerformance18]

yes I do, I only had the aethos to be honest for a like a month and then it sold lol, I had to sell it becauyse at that time bikes were selling so fast, but to be honest, for where i am the bike tarmac holds top end speed so much easier here but the roads are all flat, I ride 35 miles and I go over 32 feet of incline. the aethos, being it has simialr geo to tarmac felt somehow super comfy and like riding a luxury sports card, like a mercedes amg, comfy but very fast and resposive but the tarmac fells like porsche a little bit more uncomfrtable but super quick and fast

[@zacharypeattie]

I think it looks great. I think this should be the last to upgrade. I’m in the position of figuring out if I should get a power meter or a new BB. But if you’re going after the look, then yes it’s beautiful!

[@GCPerformance18]

yea look all the way its a ncie thing, something like you said whne you dont have anything else to upgrade.... go power meter

[@jaspreetsidhu5708]

Where all the cost goes, to the packaging.

[@GCPerformance18]

Lmaooo that packaging is nice doe

[@jaspreetsidhu5708]

@@GCPerformance18 can't argue with that.

[@duckmanduckfairy8010]

Slick and the option for just the rollers is nice!

[@GCPerformance18]

yea im a big fan

[@davidfinn9828]

Right after seeing this ospw i bought one with your discount code , looks lovely on my s3 di2 ultegra ,but thats where the praise stops , no matter what i did could not get it to index correctly it would not go up a gear and when i had it going up 3 coughs lower it would not go down .looked at the casset spacing and found that an older ultegra casset had slightley narrow spacers i used them , it still would not index propperly , put a very light plastic washer with the dust washer on the spring to tighten up the very slight slack on it , still could not get it to index properly, put back on original p.w. and no problem's, in short a wast of 212 euro , the play in the pully wheels is to much as well as the play in the mount , would recomend not to buy

[@GCPerformance18]

I am very sorry, is your ultegra di2 the long cager version because if it is, then you need to adjust the system to fit for a long cage derailer and it wont shift right witrhout doing so, let me know if you have issues, also reach out to the team on instagram they are very nice to work with

[@davidfinn9828]

@@GCPerformance18 tried every thing from b screw adjust to di2 indexing and took apart cassette and changed the 3 black spacers for 3 from an old casset as they were aluminium and marginaley narrower, the new ultegra cassette has plastic spacers and the tolerence is not great , cleaned cassette and replaced , on the small crank ring i can get it to index properly but when i change up to big ring it wont drop down on 2 gears and when i index it on the big crank ring it works until i change back to small ring and on 2 gears it wont go up , it seems to have too much play in the wherls and the fitting to derailer body

[@J88HNT]

I am building a bike with SRAM RED AXS ETAP. Chainset 50/37 Cassette 33/10 If I install a NOVA RIDE oversized pulley, what modifications to the chain do I need to make? Thank you

[@GCPerformance18]

Nothing at all just install the chain not cut. Just right of the box

[@siitan83]

when the price drops to 20€ I'll start to consider.

[@GCPerformance18]

lmao lemme talk to corporate

[@Wadsyrunsrides.]

Something I have definitely been thinking about, but interested to see the difference between this and just getting upgraded coggs. I am running sram axs force for reference

[@GCPerformance18]

I always like the bigger jockey wheels, you will need a new chain with this as well, so keep that in mind

[@jimmynickelz]

After experimenting with the ospw thing, ended up going back to reg sized bbinfinite wheels. At this price though, might be worth trying.

[@GCPerformance18]

yea im telling you its a really nice product for this price, if it was 500 its not worth it but this is mroe affordabler

[@eikm31]

your bike is sick!!

[@GCPerformance18]

Thanks my dude 😁😁 not like yours

[@phuocthuong8607]

There is no shipping to United States. At the check out where you pick country United States of America or America is not on the list..

[@GCPerformance18]

really???? message them on instagram they should ship to you.... ill ask them right now

[@phuocthuong8607]

Thanks! I msg but nothing yet also sent an email. Your review got me wanting to buy it now but I couldn’t pick the country I wanted in the checkout section. No USA or America or United States of America. Unless I’m trippin 😂

[@paulinbernard5110]

@@phuocthuong8607 it will be solved today 👍

[@novatoride]

Problem solved, we updated shipping For US. Available online, Leadtime from 3-5 days

[@GCPerformance18]

@@novatoride :))

[@terthaankardas987]

What’s the difference between the OSPW replacement for Duraace & 105. I ordered at Nova Ride for Dura Ace and received the one for 105.

[@GCPerformance18]

i would sned ti abck and get the right one for sure

[@brpugonlatour1636]

Great video. WhAt BB would u recommend for a pinerallo prince fx?

[@GCPerformance18]

Anything ceramic speed tbh make sure it’s Italian threaded

[@GCPerformance18]

@@louispastore7301 Thanks so much my guy!!! You seem like the worst type of person, and probably are the worst type of consumer as well...... preciate it

[@TheMerckxProject]

Bought set of these, and spent the first ten minutes out of the box just spinning them. Not sure how you can't detect a "gain" when you compare the stock pulleys spinning* vs these. Amazing how many experts who will expound the benefits of lower rolling resistance to convince you to buy tubeless...and then completely write off this "lack of resistance." I really had this industry some times.

[@GCPerformance18]

lmao!!! I am happy you are happy with the purchase they are so cool right!!!! awesome buy!!!

[@TheMerckxProject]

@@GCPerformance18 yep. Getting them for ~$200 made a big difference too.

[@steliosvasilakis6263]

I can't believe that ultegra still doesn't have any ball bearings maybe they gonna add some after the upcoming version of duraace is relished

[@GCPerformance18]

I think they do it for durability and the fact that no grit gets inside there so it will last longer and be smooth

[@steliosvasilakis6263]

@@GCPerformance18 that's a good point butt I think you are paying too much for bushings

[@aleksploskov4489]

I'm pretty sure my Ultegra R8000 has ball bearings. Replaced mine with an OSPW system for aesthetics too. Love how they look with my black and gold YBN chain.

[@nicholasyoong4978]

Both the Ultegra and DA has bearings. I've taken the Ultegra pulley wheels to clean it b4 therefore I can confirmed it. The 105 on the other hand still uses a bushing or shim however you call it...

[@DanTuber]

Are there regular pulley wheels that spin as freely as these OSPW? Just not a fan of the big size.

[@GCPerformance18]

Yes they do 😁😁

[@javabk]

Looks super! How many extra links over more than current di2 setup ?

[@GCPerformance18]

I think it would just need to more links so maybe like a 114 chain or 116

[@robertwhyte3435]

Did you change the chain. It looks short.

[@GCPerformance18]

I did not lol. This is my demo bike and I don’t feel like buying a new chain for a brand new bike lol since I’m riding it I just won’t go into those top two gears. And if a customer wants it ride the bike I will put the old pulley on and let them take it. It’s not hard to change

[@hjshoon5244]

The cage “looks” fragile. I’ve friend who used Ridea ospw that’s similar in design ie hollow carbon cage and it broke while cycling. I know carbon is stiff but not sure if the design can withstand the tension and torque of powerful riders

[@GCPerformance18]

honeslty its not something that wouls snap, that cage was a thick layer of carbon the sram red cages are all carbon same with shimano duraace and those are thinner

[@Turbo329]

My Ceramic Speed OSPW, Bearings, and UFO Chain arrived today. LOL

[@GCPerformance18]

NO WAY!!!!! thats awesome!! must have picked it up for black friday? nyour gonna love it though, enjoy :))

[@Turbo329]

@@GCPerformance18 lol thanks. I’m installing it tomorrow. Can’t wait. Gonna wait till race season before I install the UFO chain. Will change out the Cassette to Dura Ace as well from the Ultegra that’s on there now.

[@Karla-Flr]

Do you think that this works on my spezialized turbo creo Expert Evo ? I have the di 2

[@GCPerformance18]

Yes it will work for sure

[@HardiKhu]

hi, is that a GS rear derailluer? have any issues with the RD running all those cogs with nova OSPW?

[@GCPerformance18]

no not at all, just make sure the chain is the right length and yes it is a gs

[@HardiKhu]

@@GCPerformance18 thanks, i have bad experience with one brand, my rd is gs and it wont take all the chain after i change to that OSPW, i think it limit the movement of the pulley to move all the way back, will try nova, thanks

[@HardiKhu]

@@GCPerformance18 went to websites to buy, description said is NOT compatible with Ultegra 8000-GS or 8050-GS -.-

[@novatoride]

@@HardiKhu Stay tuned, upgraded version available within end of year, will be compatible FOR SS AND GS cage ;)

[@stewartfosterc]

Do you have an opinion on the bbinfinite pulley wheels?

[@GCPerformance18]

I do not I have not had them in my hands yet I am sorry

[@666Dejmien666]

What do you use to lube your chain? Proper lube can make quite a difference.

[@GCPerformance18]

I use the squirt lube. It’s like a wax lube

[@666Dejmien666]

@@GCPerformance18 I use it too. However next season I'd like to try Absoluteblack GRAPHENlube and see if it's worth it.

[@GCPerformance18]

I also have used mucoff ceramic c3 it just comes off easier and needs to be applied more often

[@jimbosimon]

saw it installed on your specialized aethos. I checked on the derailleur spec at specialized website and it stated to be an ultegra di2 medium cage. however, Novaride states that it is not compatible with ultegra medium cage. Do you have any issue with installing it?

[@GCPerformance18]

none at all, it worked fine

[@MrHermano321]

You need to put a bigger chain if you upgrade to nova?

[@GCPerformance18]

yes u do any oversized pulley

[@ryanturk4418]

Good vid....they need to hook you up with a promo code. Repost once they do and ill pull the trigger!

[@GCPerformance18]

Lol thanks so much!! There a good company they got some more stuff coming out so hopefully in the future

[@takuan650]

I have Ceramic Speed, they look so much better, they cost so much more so they must be better and save about 5 watts @ 45km/h. maybe, they say. I am a sucker for that chain noise on CS.

[@GCPerformance18]

yea I hear you for real on the looks, I mean its all in the eye of the be holder, but they do make me feel faster for sure

[@dhirajmasandful]

Do they do long cage for wider cassettes.

[@GCPerformance18]

that is a long cage I think it can go up to 32 on that size for the pulley wheels

[@milnella]

Hi, any issue with drop chain when going over humps or pot holes?

[@GCPerformance18]

honestly, none at all just made sure the chain is cut properly to the right length, you shouldnt have a worry

[@dlrs1530]

Awesome fidget spinner

[@GCPerformance18]

Lmfao stopppp could you imagine if they just advertised it like that

[@jnje108]

How’s the shifting on the nova pulley cage?

[@GCPerformance18]

hahahah your name and profile picture made me literally lawl..... but in all seriousness they work great.... there is nothing that lags and nothing there that causes any mis shifts.... works just as any other ospw and as long as adjusted correctly there is no issue

[@jnje108]

@@GCPerformance18 hahahaha Fast and furious baby! Anyway would you happen to have a review for this cage for Sram Force axs 12s? Cheers!

[@danielotero4484]

I am surprised you won't charge them more cause bought OSPW online and not off your overprice shelves...

[@GCPerformance18]

lmaooooo if thats the way you see it then you must be getting scammed your whole life

[@danielotero4484]

@@GCPerformance18 the scammed are the one's that don't do their homework

[@GCPerformance18]

@@danielotero4484 this is true

[@leeasy7112]

Do we need to increase chain length/buy a new chain if we want to install these OSPW?

[@GCPerformance18]

yes you have to do it with any ospw

[@leeasy7112]

@@GCPerformance18 What kind of chain do you recommend? My friend is rocking ceramic speed OSPW and he was using ceramic speed's UFO chains. However, he told me that those chains generate lots of chain noises, so he went back to using Shimano chains.

[@omarlynn2992]

I was thinking about the blue one too.

[@GCPerformance18]

blue one is super hawt in person

[@ElonMuckX]

$50/gram savings...........where do I sign up!!! But that's the price for my Patriot Blue bike to look good:)

[@GCPerformance18]

lmaooooo yea the blue is a god color honestly it matches my aethos blue so good

[@Hocktiong8288]

Do you have any discount code?

[@GCPerformance18]

yes I do it is, GCPERFNOVA10

[@littlevo9]

J’ai eu ceramicspeed aucun soucis mais mon pote a eu novaride elle a vrillé et ses passages de rapports sont devenus très mauvais…mon conseil,gardez votre chape d’origine,c’est gratuit et fonctionnel

[@GCPerformance18]

really? I have had 4 of these installed on my bike and i had no issues with them, I installed all of mine and also installed some for consumers i have here no issues

[@chan403]

Hi, can I run a 11/32T cassette with this OSPW?

[@GCPerformance18]

Yes you can. The 32t is the biggest thoigh

[@chan403]

@@GCPerformance18 Thank you for the reply. I purchased and install this on my Ultegra R8000 SS, do you know how can I adjust this on the ETube app? It only has 11-30T as the biggest option. Is there any way I can optimize the shifting on my 11-32 cassette set up with this OSPW?

[@GCPerformance18]

@@chan403 im not to sure with the etube app but if you just take it to a shop and just have them cut the chain to the right length it should work no problem

[@amirazhan1870]

Can this go with the 32 or 34 cassette?

[@GCPerformance18]

32t is maximum

[@DavidDickens1]

Can you do a full NOVA RIDE OSPW install video? The NOVA RIDE video is terrible

[@GCPerformance18]

lmfao maybe next time i get one in I wil but refer to ceramic speed videol they do a good job

[@cyclingfan7303]

Where is your store ? what’s the name of your store ?

[@GCPerformance18]

Bicycle generation south Florida

[@cyclingfan7303]

@@GCPerformance18 thank you!

[@dothat15]

Do they sell bottom bracket?

[@GCPerformance18]

I dont think so, but you can the website out on the description of the video and it has alink to show all there products

[@extraterrestre1590]

That’s your new road bike??? 😍

[@GCPerformance18]

lmao yes, im using it for right now maybe this year

[@andersnyberg4034]

They are supposed to have little play for shifting

[@GCPerformance18]

yea makes sense, I figured as much

[@terthaankardas987]

Problems with Nova Ride doesn’t seem to end. The bigger jockey wheel is jammed. The customer service said it is normal, and should run free after use. Who’s checking afterwards. Took the bike to local S Works dealer who confirmed there’s some quality issue with this piece. The gears shift with delay, sometimes doesn’t even shift, keeps slipping, and so on. No concrete Solution or responsibility from Nova Ride despite numerous emails. All they offer is a refund, but not a quality product. It’s been suck an ordeal, and still not over. Looks like €200 is down the drain. It’s a gamble.

[@GCPerformance18]

Damn I’m sorry to hear that, just take the refund for now until Maybe they improve, I only saw the side of them sending me the product for free, but yea I mean out of the box it should never be like thag. It should be as smooth as glass

[@dontdisturb_bin]

Where i can buy this part ?

[@dontdisturb_bin]

Im from indonesia

[@GCPerformance18]

check in the video description thats there website and they will ship to you

[@robbyracer9715]

Is your chain too short?

[@GCPerformance18]

lmao yes, its a demo bike right now so I didnt want to buy a new chain for a brand new bike, so I just put it on because its easy to install and then I know not to go into those alast two gears and then if someone wants to try otu the bike I would just swap the pulley

[@patrickparisienne1917]

Sweet product!

[@GCPerformance18]

Thanks 😁😁

[@juangalloza7406]

Can we get a video review of your bike ???

[@GCPerformance18]

yes its coming out soon lol thanks of rwatching

[@getreadyforthepunch3474]

short chain?

[@GCPerformance18]

lmao yes, its a demo bike right now so I didnt want to buy a new chain for a brand new bike, so I just put it on because its easy to install and then I know not to go into those alast two gears and then if someone wants to try otu the bike I would just swap the pulley

[@getreadyforthepunch3474]

@@GCPerformance18 ohh okayy

[@BrianFaure]

They need to work on their website/domain...my Palo Alto firewall hates their website....

[@GCPerformance18]

Lmaooo it doesn’t like the French I’ll talk to them

[@nickg569]

Better THAN (not better THEN).

[@GCPerformance18]

Ohhhhhkayyyy dude. Lmaoo

[@thekeytoairpower]

I think you loaded you clips 1 4 3 2...

[@GCPerformance18]

I’m gonna start doing like the thing on KZbin where it breaks it up into pieces that way everyone knows

[@argeelearner3978]

Nice!

[@GCPerformance18]

Thanks so much w

[@michiganstate149]

Astheically this beats CS by a long shot IMO.... Plus your wallet would appreciate you a bit more

[@GCPerformance18]

Yea I mean half the price is an insane bargin and I love the look of it personally and not a big CeramicSpeed logo

[@Cycling_in_ja]

5 gram 🤣🤣 I like it tho 👍

[@GCPerformance18]

Lmaooo we going for the weight Winnie max

[@robertwhyte3435]

You have to add in the extra chain length.

[@mvm9407]

Better THAN, not better "then".

[@GCPerformance18]

bruh

[@wasupwitdat1mofiki94]

I so hate carbon fiber. I think if OSPW were a real thing Shimano would have included them in the Dura-Ace line.

[@GCPerformance18]

Who knows we will see, but then they would be like counter productive against themselves because they would be marketing against there lower lines

[@Ninja_Revenge]

Still 5x price of aliexpress OSPWs. Would buy for 100bucks, no more.

[@GCPerformance18]

this company is way nicer then ali express

[@qibble455]

Just call it jewelry for bikes already. Imho that it's a performance boost is nonsense.

[@GCPerformance18]

Yea it really is. I mean I’m sure there is the tiniest .00213 marginal gains. But nothing we would feel

[@bebopman5]

5:12, Quick maths

[@GCPerformance18]

lmaooo

[@LarsRR]

*than

[@GCPerformance18]

Lmao 😞😞😞

[@MUTP-zq1oc]

Non of those oversized things are better.

[@GCPerformance18]

yea huh.... have u ever rode one? I have felt the difference myself

[@MUTP-zq1oc]

@@GCPerformance18 nothing different in time trial with my ceramic stock sized pulleys. Cant tell any difference at all with the time trials.

[@misterzero84]

Sure doesn’t look better than ceramic speed 🤷🏻‍♂️

[@ethancushing3398]

They both look fucking stupid

[@GCPerformance18]

I mean it’s honestly preference at that point.

[@GCPerformance18]

Lmao a lot of people don’t like the look of it. I like it a lot

[@smittyboy]

And it doesn’t work with GS derailleurs... great

[@novatoride]

@@smittyboy new version will be updated to work both with SS and GS derrailleur. Available next month ;)

[@f1fanatic710]

It's all hype or a fad. Work on your form and fitness you'll be a richer individual in the long run.

[@GCPerformance18]

I mean it doesnt hurt for people to buy what they want

[@MrGlenndini]

Better then...........really?

[@GCPerformance18]

Lmfaooo

[@tccycling]

"Than" not "Then" lol

[@GCPerformance18]

DAMITTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT I thought grammer police were only in my discord not youtube too lol.... I aint changing it lol

[@tccycling]

@@GCPerformance18 sorry i couldn't resist lol I comment because I care hehe

[@GCPerformance18]

@@tccycling lmao..... care less please hahahah

[@antonvarbenov7334]

A power meter should be bought way before considering these useless overpriced pulleys. These pulleys will make you marginally faster, while a power meter will make you as a person significantly faster. Power meters have become quite affordable these days too. Mine is actually cheaper than this set of pulleys :)

[@GCPerformance18]

yea power meter are very nice peice of tech and they allow people to train better but sometimes people dont even know how to read that data or what to do with it, power meter will make you faster for sure but also miles will make you faster so maybe these poeple dont have the time to ride the bike as much as they want to get the most out of the power meter numbers

[@antonvarbenov7334]

@@GCPerformance18 I agree with that!

[@GCPerformance18]

@@antonvarbenov7334 :)

[@johndef5075]

Somehow Ive managed without either.

[@Jchen1986]

Guy has literally zero understanding of physics

[@GCPerformance18]

lmao me???? maybe I dont, its just a nice piece of jewelry for the bike

[@Jchen1986]

was just being salty. Watch all of your videos! Keep up the great job