It seems to help to do the carb calibration process after the first tank. My dealer said nothing about it. I found it in the manual. Did the process to a t and it did help
@Xxxpertlofi2 жыл бұрын
Mine came to life with my 11 tank like a different saw, I put a eagons muffler, now it's my go to saw, and I'm a Husqvarna guy
@Ya-never-know2 жыл бұрын
I have a stock 400. I think of it as a 60cc class saw, that’s what it’s most comparable with in weight. It’s basically a nasty 362.
@markatkinson99632 жыл бұрын
If you own a 400, why would you own a 362? Right?.
@treestuff1358 Жыл бұрын
Wait until you port your 400c it dynos the same hp after ported with a muffler mod as a full bolt on 500i
@zackeryeckenrod6549Ай бұрын
If you own a 362 why buy a 400 !
@6.8SuperDutyDriver Жыл бұрын
Just picked up a new MS400C w/20" b&c this afternoon.
@calebcrockett10852 жыл бұрын
When I was looking at getting a new saw these really peaked my interest as something smaller than a 70cc but stronger than a 60cc but just couldn’t justify the price! This weekend ended up finding a used Dolmar PS 6800i and have fallen in love with it! Would love to see how the power between the two compare because the Dolmar feels like it’s got some decent torque.
@ciphercode2298 Жыл бұрын
I love dolmar saws,but gettin parts can be problematic
@davidsawmandave873112 күн бұрын
He is right about the old poulan line , most dont know how built these saws were in the 50s and 60s
@jamiedalluge94722 жыл бұрын
I'm a husky/jred guy but if I had to buy a new saw in that class and after owning both I'd buy a 400 before a 562. I run 20" bar 99.9% of the time
@timhannan45512 жыл бұрын
The MS400 was designed to compete in Europe directly with the Husqvarna 562xp, which performs like a 70cc saw, and to replace the unimpressive MS362. Here in Europe, all 3 saws are run with 18 inch/45cm bars, occasionally with a 20inch/50cm. The MS400 is preferred for hardwoods, as it has the better torque than a 562xp. The 562xp is preferred for softwood limbing, due to the rev boost, although the MS400 is no slouch as a limbing saw.
@jacobhein43192 жыл бұрын
Everyone seems so concerned about the displacement but never thinks about the weight. It could be a 100cc saw for all i care. It has a 60cc saw class weight which matter more to me than it being 67ccs
@danielbremner6040 Жыл бұрын
I just bought a new ms400c and love it I have 3 tanks of fuel through it what ratio of fuel oil are you running and what brand oil ? I have notice I already have carbon build up in my exhaust and on my piston as I’m running 40:1 and husky xp professional
@CorwinBos2 жыл бұрын
Put a half skip chain on that 400. It will help a bunch as you can keep the revs up and clear the chips better.
@nateolmsted8992 жыл бұрын
Where did you buy that thing you can buy them all day long here in Michigan with a 20 inch bar and chain for 900
@bentwedgestanleybrand58182 жыл бұрын
Keep up the great videos. Whatever works for you woodyard! I say go for it. I am going to run a 20-in bar on my ms400c
@markatkinson99632 жыл бұрын
Good idea.
@tubesockets120v Жыл бұрын
20" Stihl Light bar is where it's at.
@noahharrell6270Ай бұрын
When my 400 broke in it just got better and better. I run a 29" lite bar skip tooth and it eats it just fine. I put a different exhsust on it. I cut a little ash but fur and pine I s all we have in montana.
@rpdoraz Жыл бұрын
I like your video format. It was nice to see the saw cut and hear opinion at the same time. Even though your not a stihl guy I feel you gave an unbiased opinion on it.
@APBT-Bandog5 ай бұрын
What Husqvarna are you gonna get that has the same hp to weight ratio and a 25" lite bar for $1100?
@backyardfirewood98522 жыл бұрын
I think it’s a symptom of the design with the mtronic/Autotune saws. I noticed similar in my 572xp when I started using it. If I tried to dog it it would fall on its face. I had previously had a Dolmar 6400…. I got the firmware updated which helped. I think you have to change the way you cut with these. I ended up getting my 572 ported by dyno joe, so it’s now the saw I thought it should have been… Maybe go check to see if the mtronic firmware is up to date.
@thatwoodguy1042 жыл бұрын
Most realistic saw review channel I’ve ever watched! another great video novice LJ👍🏻
@ryanbruner89282 жыл бұрын
I used to always run a 20" bar on my MS460 as we mostly cut pine in my area,but when I had to cut grey poplar with it I went to a "25". I can't run big saws any more,but I would sure love to have some oak to cut for a bit! ps,I know my story doesn't fit the 400 performance ,but I love to ramble .
@ryanbruner89282 жыл бұрын
on a side note,I loved to do those "milling type cuts" on our pine and get the long chips because they are amazing fire starter!
@stevemcdowell20192 жыл бұрын
Did you run Matt House 's Buxton ported 400 at Sawfest?
@richardbonner80115 ай бұрын
Will a gas tank on a ms 400 interchange with a 400 c
@ciphercode2298 Жыл бұрын
Never liked husqvarna's chain brake outboard clutch setup,but i recon they run great and others like them well enough. Ill probably always be a stihl guy though.
@davidedwards37342 жыл бұрын
I like my 400c, do once its completely broken in, should I do a muffler mod?? 20 or 25 bar??? Stay Hydrated and Have a Safe Day
@PencilProper2 жыл бұрын
Hi, I have a Ms400 have done muffler mod, reset the Mtronic and run a 20 inch bar with full chizel chain. Excellent saw, I cut mostly hard wood timbers, which can bog it down if you are putting too much pressure on the bar, I think it could handle a 25" bar pretty easily.
@markatkinson9963 Жыл бұрын
I have both for mine,... just realize a sharp chain and let the speed do the work and you will see it's the smoothest running saw around.
@shawnglacken30552 жыл бұрын
You have a realistic view of your saws. I like the way you like them to look good.
@zacharygross4602 жыл бұрын
Last saw I got is a Dolmar 7910 for 360$
@davidsawmandave873112 күн бұрын
I had one 2 , very beastly saw
@tiagogomes28572 жыл бұрын
I try, but I can't seem to like Stihl
@aaronpowell48852 жыл бұрын
Great summary of that saw and stihl in general👍🏻 I completely agree with you.
@johngardner3020 Жыл бұрын
It's interesting to hear the perspective of an 'enthusiast'. In my world the chainsaws only run when there's paying work for them to be used for. If you ran a tree service, what brand would you probably buy? Would your preferences change?
@novicelumberjack Жыл бұрын
That's a great question, and I'll admit that it would probably be Stihl if I could not mechanic myself. Their dealer network is far superior. I'd also be less concerned with the most powerful saw and I would be more concerned with the longest lasting when idiots are running it. Tree service guys are ridiculously hard on equipment. It's like they break stuff to prove they work hard or something. It's bad.
@cisco54007 ай бұрын
Great video, i like all your details of how you analyse and how you see things with saws. Well done! I must say that when you said that long bar does not save your back, I must say it looks a bit painful when you bend forward but it might be from my perspective and not what you experience. Thx alot, take care! :)
@mincemead2027 Жыл бұрын
Very helpful analysis.
@canadiancutterschannel67872 жыл бұрын
I had a 87 husky 266se with 190+psi stock and it pulled a 28" without hesitation
@timhannan45512 жыл бұрын
Dyno Joe reckons he got 5% improvement from a broken-in ms400, over an unused one, and was surprised it was that much better.
@onlygodknowswhat75952 жыл бұрын
36" skip? Or full comp?
@DPPower-cb2ow2 жыл бұрын
I was always a stihl guy husqvarna now
@terryblack12 жыл бұрын
I have no experience with Stihl 400, but 67cc makes it about the same size as a Dolmar 120, The Dolmar 120 handles a 28" bar pretty well. Back in the day I had seen pro timber fellers run them with 32" bar but most of them switched to the Stihl 044 with 36" bar for their small saw.
@ciphercode2298 Жыл бұрын
Sadly,dollars pretty much went the way of the dodo
@bentwedgestanleybrand58182 жыл бұрын
I have the ms400c. I also have a brand new Echo CS 620p. I haven't even started up yet. The new Echo I picked it up four days ago.
@zeromark2022 жыл бұрын
Please reply back after a good comparison
@vaughnwarriner12207 ай бұрын
I can see where people who aren’t used to M-Tronic carb can come to this conclusion. Do the auto carb tune process and you’ll see better performance. I’ve been running a 400 professionally for a couple years now with a barkbox and it pulls a 25 and 28” bar no problem. Never tried a 36” bar but I agree that it wasn’t designed for a 36” bar. Overall it’s a great pro saw.
@ciphercode22985 ай бұрын
Stihl has the best dealership network bar none. They make their own bars and chains and their lite bars are the lightest on the market. The price may be higher,but you get what you pay for. Dolmar sadly is no longer a player at the table,but husqvarna and echo are still good. Ive only one echo dealer near me and he has trouble getting stock and even parts,but he is a servicing dealer. No husqvarna dealers within 75 miles of me,and 3 servicing stihl dealers within a 30 minutes drive. 2 of those are gold star service centers. Any service parts ive ever needed( including screws id lost) they had in stock. The only thing ive had to wait on was 28" rs 91 3/8.050 chain,and it was just overnight shipped. Honestly if i had to chose between echo and husqvarna id take an echo. The ms400 cuts as fast as an echo cs7310 and is 3lb lighter. Its more than a pound lighter than a husqvarna 562xp,and stihl cuts faster. Id say the best comparison would be to an old school stihl 044,but lighter. Is it oerfect,no of course not. Its made to stay in a higher rpm band and of course that can cause issues with longer bars. Keep a really sharp chain,choose yourself an exhaust mod,maybe a foam intake filter and have at it. I run a full comp chain and 28" bar. Handles it pretty well and its still lighter than my old ms310 with a 20" bar. If you aren't satisfied with the oil output you can instal an oem oiler from a ms461 for about $100
@glenspryszak60052 жыл бұрын
Thanks for the info on the poor quality factory oiler..... I was considering buying a 400 but only if the oiler is top end.
@thephishh2 жыл бұрын
Out of all my saws the 572xp and the 400 are the ones I'm not a super fan of. I prefer my 462 significantly more for weight, handling and power much more. 572 is a tank and 400 to me is just lacking in power. I would take my 562xp and then jump right past those to a 462 or 372
@frankhabenicht9848 Жыл бұрын
Interesting, just bought a 462 two weeks ago and was wondering if I made the right decision.
@jamiedalluge94722 жыл бұрын
I cut 20 cords of oak firewood with my 400 fresh from new and never felt any kind of break in difference.
@nikolajk5330 Жыл бұрын
Im running a stihl 400, and I cant fault it. Pulls all bar lenghts and chain types that I own easily. Keep the 400, and use it every year for a decade alongside your other saws. Write up the maintanence costs and lets talk again. At my work, which is a firestation, we run all Stihl for all types of cutting both interior fire work in harsh conditions, clearence and storm cleanup - and most of those saws are 15-20 years old and still going strong. I love Husky power, but I would never consider buying any other saw than Stihl - but at this point im completely biased, due to 10 years of positive experience with them 🙂
@STRAWMANHUMAN11 ай бұрын
Well said! Husky power is great but nothing lasts like a stihl. Been working 20 years on tree crew, we still have a couple stihls that been working the whole time....
@loganmartin86132 ай бұрын
@@STRAWMANHUMANmy uncle has always ran a stihl 045 same saw for most of his career did math on upwards of 4800 hours on it
@joshuasweet15322 жыл бұрын
Everything you said here is dead nuts rite on and I switched to husky happy holidays
@lucasgroesbeck14472 жыл бұрын
Keep up the great videos buddy👍🏻
@7eis2 жыл бұрын
Spare parts for Stihl has been cheap for me compared to my Husqvarnas. They still supply parts for +20 year old saws. Aftermarket/china might keep them going for longer. Over the lifetime of a saw I will spend more money fixing them than the initial purchase. So if you use them to make a living the value goes from bad to good. Do I sympathize with the "neat saw but not worth the price" perspective. I get sentimental with my saws and only shelf them when everything is stripped out or other major issues I can't justify spending time/money on. I still use saws I've had since the start of my career. At the end of the day I've kept the saws that feel right. Mix and match - I'm neither loyal or a fanboy. Each new model could be a win or fail. Only reason I dislike the 57x series is sound when they aren't loaded up with big wood. It pierces my ears, but they do cut nice.. oh and don't get me started on primer bulbs on pro saws😅
@timberslasher48992 жыл бұрын
I agree I try to like Stihl too. I used to love them but I don't like them anymore. But that don't mean they are bad. In my profession as long as you have a Stihl, Husky, Or a Johnny Red you will be fine.. One of my best friends owns an Echo/ Cub Cadet dealership and he won't even sell me an Echo...LoL
@halfdollar86 Жыл бұрын
3:28 you mention top saw manufacturers. And I agree with you. Just curious what you think of Solo saws. Do they make them anymore? I would like to try one sometime. The Chainsaw industry has been rocked by mergers and acquisitions (like many industries) We have lost some great brands with a rich chainsaw heritage. For that reason I would like to see Solo be more accessible here so we have more options. Competition is a great thing for all industries. It drives innovation and also keeps prices more reasonable. I really hated to hear that Makita is no longer going to be selling gas chainsaws. Essentially taking the Dolmar heritage out of the game now. Homelite, Jonsered, McCulloch, Poulan, and now Dolmar are either neutered to the point they only offer small cheap homeowner options or non existent.
@TheNutzandBoltz2 жыл бұрын
261 $679, 550 Mark 2 $679, 400c $1009, 572 xp $1155, they are both shitty expensive.
@ssergei2 жыл бұрын
Boedy, Echo is more about reliability. For homeowners doesn't matter these seconds in speed difference. It's like Toyota. Simple, reliable, inexpensive, but has some potential for improvement. Yes, there're some other brands with faster products, but we all can see how many problems every model has in a long periods. 1 question: what if this 400 will not get more power once it'll break in or if it'll be easily halted like now?
@modarkthemauler2 жыл бұрын
The echo performance might be also down to the same thing why car guys want JDM toyotas more than rest of the world models. Echo does have a less restricted sx models for Europe and a different model name for domestic Japanese market saws. But this is all a speculation.
@ssergei2 жыл бұрын
@@modarkthemauler ecology things too, more resticted engines etc. Probably some other things, for ex here in US afaik you cannot sell husqvarna combo gas can (perfect can) because of it's color. Must be red, but it's orange.
@modarkthemauler2 жыл бұрын
@@ssergei That's unfortunate about the combo cans because they are really good.
@joshuajohnson43962 жыл бұрын
I like the cut speed of those 400s when on the pipe but I wouldn't buy one new. Awesome saw however
@SCouch-cw6je2 жыл бұрын
I run a saw for a living and prefer Husqvarna personally. The way the stihl fits and handles I just don’t like
@justinp76872 жыл бұрын
Have OEM stihls but my clones get used more then them.
@SCouch-cw6je2 жыл бұрын
I had a few clone 372 they run good but wouldn’t hold up after a month. The cranks in them are really soft. I have a set of neotech cases with Oem crank and carb with hyway top end and it has served me well so far. It’s been getting it for 4 months now and doing good
@justinp76872 жыл бұрын
Right now all Stihl clones the 444 and 660. Don't run for work just firewood also like that if they get beat up then oh well
@paulmcreynolds17742 жыл бұрын
Stihl is kinda like John Deere. They're quality equipment but with John Deere that green and yellow paint must cost a lot of money based on the prices they charge.
@lancestacey23602 жыл бұрын
thx
@jeffbarrett61262 жыл бұрын
That the way all stohls run have keep rpm up that's the diff of husky I run all saws shihl week if dog in much
@oldcodger19292 жыл бұрын
I'm pull for your 400 to go full gorilla when it breaks in. I have my doubts. Have a great day.
@jacobhein43192 жыл бұрын
You won't find a better saw in my opinion to pull a 20 inch bar. If you wanna pull a bigger bar either mod it or buy a bigger saw such as the 462. Its a professional saw so yeah i wouldn't wouldn't recommend it to very many people.
@jamesfarmer15232 жыл бұрын
👍👍👍👍👍👍👍👍👍👍👍
@thephishh2 жыл бұрын
Put a grapple on your tractor so you can cut them at a better position. That helps a lot
@scottfoster2487 Жыл бұрын
You buy a pro saw no matter brand they cost more because quality aint cheap. You get what you pay for in any tool.
@woofy5482 жыл бұрын
I don't understand where they're trying to make the 400 fit in. The 362c is an awesome saw, and the 462 might be Stihls best saw ever made.
@ScrewdriverTUNING2 жыл бұрын
Junkety junk junk sthil marketing is laughing all the way to the 🤑bank. 🤭 I agree with top dog what’s the point ? $1100 don’t you feel like you just got stuck in the behind 🤮
@lukereynolds99072 жыл бұрын
461 is better
@woofy5482 жыл бұрын
@@ScrewdriverTUNING they're a nice saw, I just don't understand where they're trying to fit in. The market is flooded with sub 60cc saws.
@ScrewdriverTUNING2 жыл бұрын
@@lukereynolds9907 I agree with that .!!
@danclas59832 жыл бұрын
@@ScrewdriverTUNING
@crazyfeller57042 жыл бұрын
👍comment
@rubentrujillo20132 жыл бұрын
Like to see a wack off against a Dolkita 6400. I expect it would eat its lunch.
@dmc89812 жыл бұрын
when do you test a 572xp I think that's what you should have bought if you like jonsered cs 2171 you will love the 572xp I am sure I have both
@Doc-Cole_Trickle-of-Chainsaws2 жыл бұрын
Just not feasible 4 an average person 2 purchase. The clones are taking that portion of the market over and then some! 👍🆙BigGuy
@nateolmsted8992 жыл бұрын
That stand up and buck thing is fake it doesn’t work on hardwood
@markatkinson99632 жыл бұрын
I get why people like it. My thing is that shorter bars are easier to move around, easier to limb with, More efficient when you cut, less friction, better oil use, faster to sharpen and easier to maintain.
@maccaspope2275 Жыл бұрын
Hope you enjoy having a crook back mate
@nateolmsted899 Жыл бұрын
@@maccaspope2275 nope nice and straight and healthy. Do it all day long every day.
@maccaspope2275 Жыл бұрын
@nateolmsted899 Well thats good, but still having a long bar and standing up is still way easier
@nateolmsted899 Жыл бұрын
@@maccaspope2275 I understand what you’re saying, but when you cut hardwood in Michigan all day long every day it just don’t work like that
@markficarra8502 Жыл бұрын
I process over 80 cords a year, using only still saws, totally running the heck out of them all! Never one time have they let me down!! For me there worth every dollar to me!!🪵🔥
@Doc-Cole_Trickle-of-Chainsaws2 жыл бұрын
👍🆙BigGuy
@lukereynolds99072 жыл бұрын
Polan and stihl in my opinion shouldn't ever be compared it's laughable to do that... when you have such saws as the 044..066 there's no comparison
@novicelumberjack2 жыл бұрын
Then I would say that you must have little-to-no-knowledge of what Poulan used to be. Poulan Pro 445- better saw than 044. Poulan Pro 475- better saw than 046. When the 066 came out, Poulan didn't make anything in that class. But I was talking about before that.mid 70's to mid '80s. Poulan had very competitive saws. The 4200 and 5200 were right there with anything in the same class made by other manufacturers at the time. They were at that point a top tier saw company. Even later on with the introduction of what I call the Hightops, they were very competitive, and I do believe at that time they were the best selling saw manufacturer in the world. Now, because they have put out so many crappy saws for the past 25 years, people either forget or are simply ignorant of the reality that they used to be seen as a VERY strong competitor.
@jbbolts2 жыл бұрын
@@novicelumberjack absolutely 100% correct... like a lot of companies they were bought for the name and started pumping out garbage
@gregherr47822 жыл бұрын
You just defined a Toyota. It's way overpriced and the used resale it way too high too. Must be marketing. lol
@williamgarrity94822 жыл бұрын
I never bought something I tell people I don't like .what are you telling us ,I wood of bought an echo saw of same performance n upgrade the muffler period. Your welcome .God bless yall real good.
@edhoyt56002 жыл бұрын
To see you run a Stihl chain saw You never like Stihl saws Thay are great saws to run everyday Top 2 saws to run everyday That is the only saw that I run everyday Had a Stihl in my hands at 14 years old
@EcSsAwS2 жыл бұрын
First comment !
@peanutbuttersanwhich14882 жыл бұрын
I rather buy others at better price then this expensive ass saw :)
@markatkinson9963 Жыл бұрын
You do you man.
@billcramer904710 ай бұрын
400 saw is a dog
@garryaylward80507 ай бұрын
You are certainly a novice
@reubenmcloughlin4232 жыл бұрын
IMStupidO. The price is a complete reflection of demand (by pro users). The stihl saws are in highest demand because of all of the factors that make them better for production cutting. While your opinions are completely accurate for a enthusiast, a pro saw user may evaluate with different parameters. This might be a slight exaggeration but most pro user are happy to pay a substantial amount more for a saw that is just slightly better than the others. (my company does own a 400, ported since new, and we LOVE it)
@modarkthemauler2 жыл бұрын
Demand does not mean the best or quality. It's just that, demand. If demand was a metric for quality then Apple products would be head and shoulders better than their competition. Not saying it's a bad product but demand and price is not the thing to look at. My source is that I work in forestry and have tried all three Stihl, Echo and Husky and lean towards husky on the chainsaws and Echo on the brushcutter/clearing saws. And price is not a issue because my employer pays for the equipment, I just pick it.