MS441 gets Carb limiters removed

[@tomr2007]

Stihl provides great service manuals that explain everything in detail. Sometimes reading the instructions can save time and frustration.

[@jonbobskunkworks]

Love some pawn shop finds. Around here about all I ever see are home owner 45cc stuff. Great job man!

[@jjm3254]

Same here. They said they sold larger ones on ebay.

[@christophercollins3460]

I've been watching you bring more and more Stihl saws to the show. I'm beginning to think that you secretly like Stihl Chainsaws 😉

[@idratherbflyingthesaucer6270]

Meee tooo and I have to do it more often than any saw I've ever owned. The normal maintenance on this thing is ridiculous to keep it running optimum. Thanks for time my friend.

[@lumbearjack1439]

Honestly at first I hated working on stihls but I’ve been running an 066 and a 461 all year and after getting used to how these 2 saws go together I find them easer to work on than huskies…except the impulse line. Damn those impulses. This stihl looks god awful compared 😂

[@thadstuart8544]

For reselling these, you can dress it up easily. Remove the bar and spray gasket remover on it and let it sit for a couple hours. All that old bar paint will come right off (i use a small brush to easily scrub it off). I then put oil on bar to preserve it. Those old metal clutch covers can be painted with Rustoleum's Farm and Implement aerosol paint, in Ford Gray. Its more of a tanish gray and matches Stihl color great. Those 2 easy improvements make the saw look much cleaner. Just fyi friend

[@timothybyrom5560]

Not difficult, just different, a little complex sometimes, but when you get to know the ins,and outs, not too bad.As far as sitting down. What are you supposed to do when you're half asleep, piss all over the bathroom? Mama be mad,you do that. Just sit down, and relax. Take a little nap.

[@Johnnyreengo]

Mannn look at all those fines behind the filter 😬

[@kingsaws]

I would agree , I can't hardly stand working on a stihl

[@bl9531]

What do you prefer to work on?

[@kingsaws]

I prefer working on a husqvarna

[@anthonyhicks3085]

How much for the 441 I've got one looks still new but it blew a plug I took an had a guy put a new head on it now it want hit a lick an when it blew the plug it was running likenew new

[@CharlesWinters-ie3jy]

There is supposed to be to be a bolt that comes thru the filter with a wing nut to hold it on.

[@aaronpowell4885]

Stihl saws and brush cutters definitely aren't the easiest to work on. You should have no problem making a good profit from that purchase!

[@stevemcdowell2019]

I had a 441 and it was the most difficult saw I've ever worked on!

[@DaveyBlue32]

Need a ring of axle grease around the bottom edge of your filter and you won’t get the fines though into your intake! A foot off a pair of Queen size pantyhose with a fat rubber band around the base of the filter is an excellent prefilter! Is it the 441cm or do you have the adjustable carburetor??? 50mm Xtorq design… like a 372xtorqer!!! The piston interchanges with the 372 Xtorq! LMFFAO!!! Don’t run quite a good!!!!

[@Revellersaws]

Once worked on a Stihl for a whole month one afternoon

[@woodchuker570]

You did good on that Body, one just popped up today here on CL for $600 . Looks a little cleaner , not by much.

[@colindriedger7158]

Just took my first MS290 apart. What a pain in the ass. Why Stihl makes everything so overly complicated is beyond me... I will say the 026/MS260 isn't a bad saw to work on though. Just crappy air filter design lol.

[@brendanfromnz]

The reason I believe is simple. They don't want the average Joe Bloggs home mechanic screwing around with their saws at home. They want you to take it to their authorised dealer and pay the trained tech $100 an hour or whatever the going rate is these days to fix it. Once you figure them out and get used to them though, they're not too bad. Not so much difficult, just different.

[@timberslasher4899]

You like Stihl bout as much as I do...lol

[@DaveyBlue32]

If you unscrew the screw’s you don’t have to try and yank it up!!!! LMFFAO!!!

[@yota4004]

looks like a ton of dirt gotaround the air filter and is stuck all over the black plastic around the carb inlet. not good.

[@joshuajohnson4396]

I like those series of stihl

[@justinp7687]

Only thing I dislike about Stihl is having to go to a dealer for parts or pay overpriced on eBay. Worst part is when closest dealer is a ace hardware. 441 are the worst ones I have ever delt with.

[@darrellpeak2914]

Aughta not leave your shop without a muffler mod, bgd, and port work….

[@mattfleming86]

THATS how you make a buck on a saw.

[@Bearclaw_Jake]

Funny all the Stihl guys complain about husky and vise versa. I guess it's just ford v Chevy kinda thing. I've always ran Stihl as that's all that's in my area, but I've always wanted to try the husky 372 as I hear it's legendary.

[@novicelumberjack]

When you finally get a chance to run one, keep in mind...there are faster, torquer, lighter, smoother saws. But nothing puts them all together as well as an original edition 372xp. It also responds very very well to modifications and is incredibly reliable. Straight knocked it outta the park with all the "3" series pro saws. Non XTORQ, that is. The XTORQ saws just aren't quite as nice.

[@Bearclaw_Jake]

@@novicelumberjack thanks for the feedback. I'm currently running a 461 stock, pulling a 28" bar for my big saw. I don't have a lot of complaints so far. Have a wonderful thanksgiving brother.

[@lukereynolds9907]

Maybe it's the operator and not the switch 🤔 😕

[@darrelljohnson4658]

Good job sawrus nice 👍

[@kingsaws]

Dude that screw driver have reverse threads on it

[@troy3052]

hurry and get that saw ready for db fresh to use

[@darrelljohnson4658]

Funtime sawrus

[@cajun3197]

Stihls aggravate me too. Plus they just don’t run as good as a husky

[@oldcodger1929]

I agree Cajun.

[@cajun3197]

@@oldcodger1929 😉

[@gsw313]

Evidently you know nothing about chainsaws then

[@oldcodger1929]

@@gsw313 you have a nice day Jerry.

[@cajun3197]

@@gsw313 ha. Ok, I’m actually a saw builder 😂😂😂😂

[@Michagan_outdoorsman_James]

Stihl only the best, F the rest 😁😁😎😎, glws for the 600.00 i u get the lightweight bar and chain?

[@Doc-Cole_Trickle-of-Chainsaws]

👍s🆙Big Guy!

[@ScrewdriverTUNING]

Sthils are to expensive for no reason at all. I’ll take the China one over the real thing everytime. Sthil folks love to say it’s the operator not the machine 😂. That plastic intake piece that holds the filter on, Throw it out. !!

[@lukereynolds9907]

Don't be hating on stihls now boady mate 😝

[@jasoncarroll891]

Hey

[@kylecromp319]

Bro your such a hater with stihl!!!!!! I can tell you right now i can tear a 044 or 046 down before you take a 372 apart! Lol your something else sometimes. Makes me chuckle.

[@Woodysworksaws]

MS 441 is the absolute worst Saw to work on.

[@Ketis1985]

you just have not worked on MiniMac yet?