NP300 35's & 4" Lift! + Diff Drop Install

🔔The latest NP300 install is here!
In this #ShedSessions video I Have a Workshop guest! Chris from ClubNP300 comes into JPCaptured HQ with his stock as a rock NP300. Together we run through how to get the offroading advantage by installing 35's a 4" lift and a diff drop.
❤️ If you find my content helpful drop me a thumbs up
🔔 Subscribe for more videos
📢 If you enjoyed this video help others And share it to a page -
• NP300 35's & 4" Lift! ...
💥Stay tuned for a giveaway and your chance to have it installed at the #ShedSessions workshop
My Top Videos For New owners
/ @jpcaptured799
💬 Join others in the comments section belowww it's totally VIP
✅ For any inquiries contact me at [e-mail]
✅ want to see more content!?
Facebook - @jpcapturedd
Instagram - @jp_captured
ModifiedNP300's Facebook page - / 528018704236497
Disclaimer: This is just some dude in his shed makin vids for the peeps. This is not a professional opinion, just mine.

[@AGeurts]

everything was looking good until you put those flares on :(

[@jedfewster8783]

Yeh I was about to say that 😔 they were to much 😭

[@ynneBBenny90]

Smaller flares would be great. They are huge.

[@clubnp3007]

hey mate i had to go these flares due to having 0 offset and my tyres stick out past the guards 70mm

[@shanestainton1483]

Isn't the 35's and 4" lift illegal anyway?

[@AGeurts]

Clubnp300 what about those egr flares?

[@tristenprior6250]

Another great video mate 🤙

[@AlexPleitez]

Bro you're Awesome! Nice video

[@jpcaptured799]

Thanks!

[@Sethjxl]

If it isn't Sir NP300, breaker of all CVs!

[@dlspoon]

Nice lift bro

[@keegancampbell8699]

Are you able to adjust the ride height whilst the nav is on the ground or does it need to be unloaded off the ground?

[@631alexander]

Wow you’re a master another great build , so beautiful!!! Hey buddy I’m form El Salvador but I m in USA right now , I’m loking here everywhere suspensión and rims !! But I can’t find anything here since the bolts pattern is 6x114.3 I gonna get hen from Australia, but where ? Maybe you can help me whit that , thanks a lot

[@SharrodVisuals]

Those front struts are the 2 - 4 inch bilsteins aye? Are they long travel? Or longer travel compared to your standard 2inch struts or do you just sacrafice ride height for travel.

[@johnrezo256]

Did you need to get new diff ratios after or was if fine to drive after?

[@greengreensio]

Hi, can you lift the front and rear by just changing the springs? I dont do off road.

[@richardgibbs00]

how is the power out put of the engine with 35 tires?

[@TheLordsaviour]

It's good to see someone modding an np300. Did you regear the diffs for the 35s?

[@Shilo-fc3xm]

Because no one ever mods NP300s? Navs must be one of the most heavily modded vehicles in the world. Hard to find one that's not modded. Lol.

[@TheLordsaviour]

@@Shilo-fc3xm thanks for the input.

[@rharripersad]

how much of the bumper had to be trimmed and would it affect the fit of the fender liner?

[@rashidnexkoyotl7524]

The sideview mirrors are bad ass. Anyone got an Amazon link?

[@GovindSingh-ol4cm]

Hey mate what you did with the oem suspension parts and can dealership buy back parts if it's purchased brand spanking new

[@G0A1]

where is that black grille from and does it have a camera mount? i have a 2020 stx but want a gloss black grille with camera mount. any idea?

[@lucasmaltaneri4511]

que bueno lástima que acá en Argentina no se consigue nada para nissan frontier

[@alt-w7130]

Thanks for showing the procedure, did you get the wheels aligned?

[@jpcaptured799]

yes, Chris got a full alignment done at a tyre shop.

[@carlossoriano9405]

Hi bro, where you get the mirrors? Are titán mirrors, right? Where you buy?

[@alealea1919]

Hi I'm Alessandro from Rome, I wanted to ask you if you know the brand toptiger suspensions for nissan navara np300 d23 , views on the alibaba website, complete kit, if they are good and if they also improve road driving, thanks

[@nazreen1610]

where can i get those side mirror?

[@hplek7595]

how much you guys spent on everythings

[@thumfox]

Good day.. please pm me the brand and part number of the shock and parts you use for the lift.. thanks have a nice day..

[@cosmelambayon3378]

How much it cost to lift up 3 inches of nissan calibre model 2018

[@elibachoo4751]

Wear you get the mirrors

[@dallasgurgel573]

Quero fazer na minha frontier. Brasil

[@affendymdsom5532]

side mirror very nice what name that item

[@d2kwazza57]

What are the names of the songs you used ? They go hard mate

[@MstadSimon]

👌🏻

[@chrisdaniel6021]

Did u need to do diff ratios and how much litres per 100 with 35s

[@Shilo-fc3xm]

Low k 2018 STX. Im on 35's with full steel bar work including brush guards, full underbody steel protection, steel tray, steel canopy. 2 spares, aftermarket air filter, DPS delete, 3 inches from the snorkel all the way through to the tail pipe and an aftermarket tune (meaning both heavy and heavily modded for performance) and I'm 14 to the hundred round town and around 12 on the highway.

[@coreyhicks6428]

Could you link where you got these extended break lines from bro ? Cheers

[@clubnp3007]

bqnnnp300.html

[@coreyhicks6428]

Clubnp300 legends bro! I need some for my nav

[@xavier6525]

What’s your recommendation for those who want their pickup trucks lifted but has no budget?

[@brendandevulder7762]

Worst thing to worry about when it comes to lift never buy the cheapest buy once and buy quality

[@ssusggus]

Looking to get a 3inch on an np300, would you recommend a dif drop for 3inch? Thanks.

[@jpcaptured799]

I think if you have time to wack one in you may as well. It's useful with any sort of lift 50mm or higher.

[@olivermcraith8366]

Has it got a body lift have been told 35s wont fit on a 4inch lift without a 2inch body lift

[@jpcaptured799]

no body lift on this rig bro, the 35's fit really well TBH minimal scrubbing at full flex.

[@islandminis2833]

What size and brand are those fog lights inside the grill? And were can i get them? Thanks island

[@Shilo-fc3xm]

I missed that. Spotties. Had to back up. Sneaky f**ker. Lol.

[@jaredtansley3236]

How many (mm) is your diff drop kit. For your 4inch lift??

[@gen1c8rs88]

45mm

[@george92080]

What offset did he run and are they 35” or 315?

[@clubnp3007]

they are a Nitto Mud Grappler 315/75r16 on 0 offset imitation beadlock

[@darrindouglas1]

What diff ratio is it running?? Would need at least 4.11's with such big tyres......getting 4.11's for mine with 33's.....

[@jpcaptured799]

Chris still has factory centres, is yours manual or auto? my auto with 295/70/17's feels perfect on and off-road.

[@marc9709]

Will he be changing the gear ratio with 35?

[@jpcaptured799]

I'm not sure Mason.I'll do a follow up on this for you guys.

[@brettmaguire7278]

What was the cost of all the gear? Not including the 35’s

[@kostalontos5000]

I would say 10k

[@itznito_8932]

What tyres and specs are these? And also what rim size?

[@gen1c8rs88]

34.96 inch/889mm 315/75r16 Nitto Mud Grappler MT on 16x8 +0mm offset.

[@lukeaus]

I would love to do this but how do you get insurance on it?

[@jpcaptured799]

you would need to confirm with your insurance compony before modifying your vehicle lift. each insurance company is different.

[@shaunsmithaus]

anyone know what the song is at 3:49

[@carlossalazar2164]

What brand was the diff drop?

[@jpcaptured799]

PSR I think for that one mate 👍🏼

[@jimrolland153]

What do you blokes do about staying road legal and fully insured etc?

[@alin0791]

🤣🤣🤣

[@jpcaptured799]

This is not road legal without having it engineered which in most states of Australia is not possible.

[@kyliepilgrim8908]

Would you get away with no diff drop and a 3 inch

[@RexOffroad]

Do a diff drop mate its worth it

[@simplevideo8629]

YAY FIRST HAHAHAH

[@corycruttenden3557]

What brand rear control arms are in this one man?

[@clubnp3007]

everything is PSR mate part number is PSRNAV-095 and PSRNAV-096

[@corycruttenden3557]

Awesome, thanks for that

[@clubnp3007]

THIS KIT IS MADE UP OF THESE CODES FROM PSR IN QUEENSLAND 4' FRONT LIFT KIT (NAVKIT-044) BUT I GOT HHD IN FRONT TO MY KIT IS (NAVKIT-021_HDFEHDR) 3-4' REAR SHOCKS (PSRNAV-024-PR) HHD REAR SPRINGS 4' (PSRSPNAV-007-PR) FIXED LOWER TRAILING ARMS (PRSNAV-095) PANHARD BAR (PSRNAV-032) ADJUSTABLE UPPER ARMS (PSRNAV-096) DELUXE DIFFDROP (PSRNAV-063) WHEELS ARE 315/75/16 NITTO MUD GRAPPLERS WITH O OFFSET HAD TO GET KUT SNAKE FLARES DUE TO TYRES STICKING OUT 70MM PAST GUARDS HOPE THIS HELPS

[@siacpanama4929]

Hi. Can you give me the purchase link of the DiffDrop?

[@athallahariawan7769]

Did you change axle ratio or it’s still the factory axle ratio?

[@aloevera74]

How do you guys sort : - ABS possible issues - speedometer not showing real speed - all the issues that come from altering the tyre outer circle as set by the manufacturer... It always baffles me how you guys in OZ do it. Cheers

[@MrKato525]

No real issues, besides tyres scrubbing when u go this big. Utes are built pretty tuff. The speedometer won't be out by too much maybe 6km/h max. Braking also isn't an issue, never heard of any one having problems with 35's. Don't forget utes are built to carry weight, hence the abs is generally decent.

[@jtb-gq]

Go 37s😂... Please don't put those sort of flares on though 🤮

[@RockyMountainTrails]

35S ARE TO BIG FOR THAT SET UP, YOU HAVENT ALLOWED FOR SHOCK MOVEMENT WHEN TURNING. GET AN 80 SERIES

[@chrisjones1864]

Why are you yelling?

[@hamiorakaiwai]

@@chrisjones1864 😂😂😂

[@lockie_builds]

How many uggie duggies do the wheels need

[@jpcaptured799]

All of the uggie duggies 😆

[@zacclohesy4511]

Go spend all that money and put shitty flares on it