First vid I've seen for explaining the horn back ring and contact requirement! Big 👍 thanks 😀
@adamschroeder25455 жыл бұрын
DUDE!!! This was THE MOST HELPFUL and PROFESSIONALLY orchestrated video and job I've seen on here on how do do this. Thank you. Thank you. Thank you. I'm gonna give the horn bracket thing a try also. You made it look SO possible. Keep up the good vids.
@Donnythelatemodeltech5 жыл бұрын
Cool and thanks.
@j.acencc62735 жыл бұрын
Best video on steering wheel installation ever. I was thinking about making one because every Damn one on the internet they runthe wire strait threw...popping off the contact plate and shit... Except this one...finally someone making a vid with a bracket horn contact kit type install. Ill make mine for an mx5.
@klrmatt58145 жыл бұрын
Surprised you did this without disconnecting the battery! But am going to use this tutorial as a basis for my mustang. Thanks!
@RBoysMedia4 жыл бұрын
I’m assuming it’s a sn95. Did you get it? I a little confused on mine. My hub has 1 wire
@indycog2 жыл бұрын
I needed to clear my SRS light on my car and just ordered some resistors today. You have the cleanest video about this issue I've seen. Thanks for making this video!
@r35tmanbash2 жыл бұрын
Thanks for the vid. I have been trying to figure out the horn situation on my FJC. Thanks to your vid I can now put back the horn. Driving with no horn sucks.
@reekoboost74985 жыл бұрын
This video has saved me, been trying to figure out the best way to fit an aftermarket wheel to my 2003 jimny without clockspring, thanks.
@BoBuilds6 жыл бұрын
The Professor is at it again. Good shit
@Donnythelatemodeltech6 жыл бұрын
Just lost 2 subs.
@BoBuilds6 жыл бұрын
@@Donnythelatemodeltech Their loss. You'll make up for it.
@patrickhomza2 жыл бұрын
This video literally just made my life! Thank you so much for this !
@mcld42143 жыл бұрын
This is exactly what I needed
@swapitout57284 жыл бұрын
Does it have to be 2ohms
@michaelcortez96232 жыл бұрын
My brotha!! Thanks for this I literally thought this was going to be a mission.
@alexstyle4203 жыл бұрын
For real big thanks man now I got a horn in my airbag light is gone thank you lots
@Nickodelic6 жыл бұрын
Awesome vid dude, you made everything so clear and easy to follow. Definitely gonna be doing this to mine in the future. That cinematic edit was sick too!
@Donnythelatemodeltech6 жыл бұрын
Thanks, I'm really happy you checked out the video, I thought I heard you say you installed coilovers on yours, ? , coilovers are going to be my next video. So I wanted to see what you got. 🤙
@Nickodelic6 жыл бұрын
@@Donnythelatemodeltech I got the BC Racing BR series (non extreme low) with upgraded swift springs 16k front/14k rear. Upgraded the springs because I wanted something slightly stiffer since I do plan to do light autocross with my car in the future. With the damping on max soft the car feels nice to daily, I'd say slightly stiffer than stock. I cranked the damping to max hard and it was definitely a different ride, car feels tighter and stiff, kinda bouncy due to the crappy roads where I live. I'd say the BC's are a good bang for your buck, they are rebuildable too. What coilovers were you planning on getting?
@Donnythelatemodeltech6 жыл бұрын
@@Nickodelic I ordered the Bc s Friday, without the spring upgrade, still no email on the shipping lol. Good to hear I made the correct choice.
@flinch6222 жыл бұрын
Note he went with a deep dish wheel. There are 50mm and 75mm aftermarket spacers available to get ergonomics back to "driver" mode for any wheel - especially those that have shallow or zero dish. You might not care about a difference around town, but cross country is another story.
@situationsshow15375 ай бұрын
Thank you I finally have a horn!
@dori2ae86redcoup5 жыл бұрын
How many wat 2 ohm resistor u use ???
@franklingorospe19134 жыл бұрын
Thank you. Great instructions. Learned a lot.
@Donnythelatemodeltech4 жыл бұрын
Thank you sir. If have time please check out my latest loads , they could use some support. Thanks again.
@lucaslong53684 ай бұрын
Damn I'm late to the party lol. Dope video! Bro got more keys than a janitor though 😂🍻
@Jiekexun3 жыл бұрын
Watching this video backwards put the oem one back in lol. Love the look of the GR steering wheels but kinda want an airbag on my daily.
@Ch3sl0ckАй бұрын
Is there traction light on due to this process or did you already have it on?
@King.Quartilliam Жыл бұрын
I really hope I cut the right wire bc he wasn’t specifi on what color to cut. 3:14
@choppaj247 Жыл бұрын
You not keep the eshift?
@malachicress3 жыл бұрын
I really liked this video! Thanks a bunch!
@dsindar26 Жыл бұрын
that resistor is 2 ohm?
@rme55312 жыл бұрын
Watched to put the stock wheel back on, need my cruise control (and horn)
@bigtimereacts2522 жыл бұрын
Does the airbag bypass work for bmw also or really any car?
@alexrothschild50442 жыл бұрын
What did you do with the cruise control lever? I saw a few 3d printed brackets made but nothing that looked good yet
@danielgause99653 жыл бұрын
Did you cut the resistor to make it shorter ?
@aquaanthony6972 жыл бұрын
Okay it might be a dumb question but what exactly is the brass pice he has under the shorthub called
@rafeeksankar45053 жыл бұрын
I have a 2003 Toyota Camry And it have 2 plugs of 2 wires each Do I use the same 2 oms resistors on both plugs
@jdmjermz4 жыл бұрын
Mans a genius! 🙏🏽
@asandberg63 жыл бұрын
Do most airbags have the sameresistance value?
@Danieldw-pz3ud2 жыл бұрын
hey what’s the bracket made out of as i can’t get it to work
@josegromero4891 Жыл бұрын
Do the hubs come wit the screws
@Donnythelatemodeltech Жыл бұрын
Usually it’s the steering wheel that has the screws
@gabegarcia77792 жыл бұрын
I put one on my 2006 gs430 - will it fit in a 2001 Gs?
@vikingselph54754 жыл бұрын
What holes do i plug resistor in? I have 4
@thatelectritian4 жыл бұрын
I would also like to know this because I'm confused
@LITLEGEND4 жыл бұрын
Me too I wanna know that part bad
@thatelectritian4 жыл бұрын
I got it posted on my Instagram I ended up figuring it out (07_offrolla.yyc)
@vikingselph54754 жыл бұрын
I ended up getting the resistors nrg sends with the quick release.. airbag light popped up 2 days later. Fuses and all are still good. Dont know wtf
@robipira4 жыл бұрын
Will this work the same for the seat airbag?
@flinch6222 жыл бұрын
I believe the IS300 specs also work for early Tacomas? [95-97]. Thank you for posting. As I understand airbag evolution, The designs begun in the 80's were over the top: a little too much volume and rate of inflation was really fast to compensate-airbag injuries did occur. 90's improved somewhat, but inflation rate still a little too much. Near '98, supplementary bags [side curtain] were in the works but not widely available - further reductions of inflation rate began. As I see it, any pre-98 vehicle is a good candidate for an aftermarket wheel, the number one reason being... get your driver ergonomics back! Horizontal distance from pedals to steering wheel in airbag cars is too short: they did it not to accomodate 4' 1" drivers, but to make leg position uncomfortable enough that you would put the seat rearward, which added room between driver and bag. The cockpit geometry itself is proof that manufactureres knew airbags were causing injuries, and extra space would reduce liabilities. OEM's aren't bad guys for doing this, but rather their engineers had to find a workaround to imbeciles in congress trying to design cars. Remember... prior to airbags cushioning stats, CAFE standards initially caused about 5,000 extra motorist deaths each year. Your dealer called this removal of steel mass a "crumple zone" - some worked, some were just underbuilt cars.
@Donnythelatemodeltech2 жыл бұрын
😁 thanks for sharing
@harof2bmx2 жыл бұрын
mine didnt come with that brass plate for some reason....what can i do?
@Diego-dv2rg5 жыл бұрын
do the wires that you soldered on the back of the horn come with the steering wheel?
@Donnythelatemodeltech5 жыл бұрын
Yes
@Donnythelatemodeltech5 жыл бұрын
Check this out if your thinking about getting a nrg wheel, kzbin.info/www/bejne/i6C7fJR8fKp_eM0
@Diego-dv2rg5 жыл бұрын
@@Donnythelatemodeltech thanks brother
@just_jc35 жыл бұрын
Good stuff. My steering wheel is nothing pretty. Thanks bro!
@andrewb40772 жыл бұрын
I wish you would’ve showed how to cut and form the piece you used
@chucksmith67695 жыл бұрын
Really nice video.................How does a person find out what size resistor.....I have a 2006 Suzuki Forenza that I need to do the airbag bypass.....hope you can help !!!
@ipfrly893 жыл бұрын
HKB bosskit for IS300 will allow the oem plugs to plug in. Then just use a retaining ring make sure Nardi horn button. Buy the parts brand new only, from HKB etc, so you don't miss any accessories.
@louiszindawa69503 жыл бұрын
Mine just came today lmao these guys had to suffer back then😂
@_s_y_x2 жыл бұрын
Does the resister on the airbag work for all cars and trucks?
@Donnythelatemodeltech2 жыл бұрын
Probably not
@claytonshields18203 жыл бұрын
I put one on my civic eg and my horn button won’t fit in so I’m guessing I’ll have to buy a spacer or a quick disconnect since both should eliminate the problem
@livinglargeandfree8322 Жыл бұрын
Would this be same for first generation Xb
@Donnythelatemodeltech Жыл бұрын
No idea
@Mcneilj103 жыл бұрын
Bro excellent video… I can’t wait to do this to my is250
@Whitelightening094 жыл бұрын
Question? can I do the same for a 1998 rav4 as far as the resistor part pr the airbag?
@IngHumanClay5 жыл бұрын
please what is the exact distanca from the plastic to the steering wheel mount? Actually it is the height of adapter + spacer.
@itz_kemp38905 жыл бұрын
Is this fit on frs ?
@elijahknight4 жыл бұрын
Followed instructions and now when I make turns my traction control light will come on. Do you know what this means?? I've read that maybe the steering angle sensor needs to be recalibrated.. please help thanks!
@franklinurrea80332 жыл бұрын
Bro!! You’re a life saver!! I have a GS300 with a Nardi wheel with no horn!! This video is just what I was looking for 🙌🏻
@Donnythelatemodeltech2 жыл бұрын
Cool
@alexesquivel55554 жыл бұрын
Does it work for any airbag system? Like Im going to do it on my 2014 mustang and want to know if It should be the safe 2 ohm resistor ?
@ULATAN.5 жыл бұрын
Great video ! Is there also a way to retrofit paddle shifters with an aftermarket wheel too? I can’t find information on that specific for the IS300.
@Donnythelatemodeltech5 жыл бұрын
You can totally do it, your just going to have to get crafty.
@Donnythelatemodeltech5 жыл бұрын
🤙
@ULATAN.5 жыл бұрын
@@Donnythelatemodeltech Cheee! thanks bruh 🤙🤙
@akarilotube5 жыл бұрын
I've seen what appears to be 2 different thicknesses from NRG (both non quick release) but can't find any specs. Do you know if the thicker one alleviates the need for the spacer? Tough to find much product info. Thanks for your time.
@Donnythelatemodeltech5 жыл бұрын
I have no idea.
@lostaperz2 жыл бұрын
do you absolutely need the spacer ?
@Donnythelatemodeltech2 жыл бұрын
No
@akarilotube5 жыл бұрын
Great vid, about to change out steering wheels on my rig. Does the factory trim leave an exposed spot on the bottom right hand side, looks like it in the video.
@Donnythelatemodeltech5 жыл бұрын
Yes, it's very small, you can't actually see any thing through the exposed spot.
@user-ue5xb4th5i6 жыл бұрын
The 3 wires for my 04 mustang nrg the green one as u said I should discard. The black wire and red wire where do I connect them?
@KamikazeKiid4 жыл бұрын
My airbag light was off at first then came on shortly after on the first drive. I opened it up and everything is still intact and in place. What would cause this? Do I need a higher ohm resistor?
@ellardcazenas1013 жыл бұрын
Hi sir. My horn only has 1 wire on it. I don’t understand. I don’t know what to di now.
@Ghst95 Жыл бұрын
My gs300 is beeping when I turn ? You know why?
@danielalvarez68434 жыл бұрын
Would I still need the spacer if I don’t plan on connecting the horn cables? however I would still like the horn cover to be there.
@Donnythelatemodeltech4 жыл бұрын
It hits the horn button not allowing it to seat onto the wheel
@gogojjt Жыл бұрын
Did this and my horn won’t stop honking since it’s always touching metal on the short hub. Even if it worked with the steering wheel horn interrupting the circuit when you take it off the quick release it will still be honking because the horn wire is touching metal. Any suggestions?
@Donnythelatemodeltech Жыл бұрын
I used a spacer
@Kellstrix4 жыл бұрын
Thank you for this video!
@JJBanuelos6 жыл бұрын
Lots of great info! Take my money 💴 show me how to edit!!!
@red.2jz4 жыл бұрын
10:45 what do you mean my GMT or GNT
@Donnythelatemodeltech4 жыл бұрын
Torque to 36 lb ft. 'Good n Tight'
@red.2jz4 жыл бұрын
@@Donnythelatemodeltech thanks, appreciate it👍
@motoctx3 жыл бұрын
Is the 2 ohm universal? Because i bought a 3k ohm for my protege and it tried to fo the same thing and it didnt go off
@Donnythelatemodeltech3 жыл бұрын
Why the 3k?
@PrplexedMG3 жыл бұрын
Hmm anyone know where or how to get a bracket to get the horn to work?
@ernestosanteliz71453 жыл бұрын
I looked everywhere for a video that explained all steps and finally found it. The only bad thing is I've never done anything to my car on my own and I haven't found no one willing to connect horn for me.
@OSOKCyber10 ай бұрын
grow a pair and do it yourself
@sherm97293 жыл бұрын
I bought the same pack of resistors as you and I don't have the 2R2 resistors in your video. I have the 2F2, 2M, and 2K2 resistors. Which one is the right 2 ohm resistor?
@ericg11492 жыл бұрын
Red red gold gold
@Real_Cash111 ай бұрын
the hub that u have the link does not work
@seangoulden4 жыл бұрын
Love that torque spec tho😂
@unkn0wn_bandit4143 жыл бұрын
Hey man, does self canceling still work
@Donnythelatemodeltech3 жыл бұрын
Yes
@199hamill3 жыл бұрын
Is it 2 ohms for all cars or just your specific car?
@Donnythelatemodeltech3 жыл бұрын
🤷🏻♂️
@russelljackson8555 жыл бұрын
Great video and top notch work
@danielalvarez68434 жыл бұрын
does it have to be 2 ohms exactly? or can I use a stronger resistor ?
@Donnythelatemodeltech4 жыл бұрын
I would recommend the exact resistor
@db99043 жыл бұрын
So I tried doing the 2 ohm resistor on my 1998 GS 300 And the airbag light is still on does it make a difference if I leave the clock spring in and I do it on the other side where it plugs into the back of the bag? I’m putting a newer style steering wheel on it and I want to leave the clock spring so I can run cruise control and horn and possibly wire up volume controls
@Donnythelatemodeltech3 жыл бұрын
Not really sure,
@thecookeman Жыл бұрын
You may need another type of clock spring to get the additional wires through to have steering wheel control. Fortunately alot of Toyota clock springs are cheap and have the same plugs.
@davidhannan29114 жыл бұрын
Nice, thanks for the information.👍
@Donnythelatemodeltech4 жыл бұрын
No problem 👍
@issakorean3 жыл бұрын
I hope im not too late but can i skip the beginning all together and just run my car with no horn?
@Donnythelatemodeltech3 жыл бұрын
Your car dude
@jacobwaters68424 жыл бұрын
Do you find it hard to reach the indicators?
@Donnythelatemodeltech4 жыл бұрын
Not at all
@markcrisp73155 жыл бұрын
Really thanks this is helpful
@chrisochoa26605 жыл бұрын
Hi, i have a question do you think i can fix my airbag light with the same method? I have and 2001 VW GOLF MK4
@Donnythelatemodeltech5 жыл бұрын
The resistance might be different, I can try to find out for you. Direct message me on Instagram.
@chrisochoa26605 жыл бұрын
TheLateModelTech sure i will!
@katlyngardner81844 жыл бұрын
I have a 2015 Scion tC is the resistance the same? I saw you have 1 ohm listed but spoke 2 ohm just want to make sure!
@cruisecurtis32476 жыл бұрын
So I like to manually shift mine when going down mountain passes etc. Is there a way to maintain that function? Or are you screwed if you go aftermarket steering wheel?
@Donnythelatemodeltech6 жыл бұрын
Not screwed. I sure you Could move the clock spring under the dash and take the buttons out of the wheel and put them some where else. You probably needed to extend some wiring.
@cruisecurtis32476 жыл бұрын
@@Donnythelatemodeltech ill just manual swap it i guess. probably less effort than extending some wires :P
@berkpolat57404 жыл бұрын
Maybe a stupid question but, can't u just still use the clockspring or does that not work with an aftermarket steeringwheel? Great video btw!!
@l3pr0k4un55 жыл бұрын
You know how to do the seat air bag bypass? I have different seats in my IS300. I’d appreciate any help.
@UnapologeticIslam4 жыл бұрын
Do the same thing to the seat airbag connectors with the resistors.
@marcelomalagutti34495 жыл бұрын
do i need to remove the battery cables to remove the airbag?
@Donnythelatemodeltech5 жыл бұрын
Probably the safest way.
@noahcash96454 жыл бұрын
Is this the srk-120h hub ??
@AlexRamirez-wr7nb4 жыл бұрын
I believe it’s srk-121h
@jcstarion885 жыл бұрын
I bought the same resistors. The light dose not come Off!. Help
@Donnythelatemodeltech5 жыл бұрын
Direct message me on Instagram, and I can try to help you out.👍
@jcstarion885 жыл бұрын
I bought the same resistor pack from amazon, i put one in the airbag socket, but my airbag light still does not turn off!.?
@Donnythelatemodeltech5 жыл бұрын
Get a meter and check the ohms , more than likely you have the wrong resistor.
@CharacterWind5 жыл бұрын
Great video man thanks, Hey also did you buy a steeringwheel hub adapter or was the steering wheel exactly the bolts for your car,?see the steeringwheel I want to get is a 3 bolt but my 2002 MITSUBISHI MONTERO SPORT probably has a 6 bolt, at this point I really don't know yet
@Donnythelatemodeltech5 жыл бұрын
Thanks, but, I really don't understand your question.
@CharacterWind5 жыл бұрын
Question as far as the 2.0 ohm resistor you mentioned, is there a specific wattage you choose?
@CharacterWind5 жыл бұрын
TheLateModelTech QUESTION as far the 2 ohm resistor you had mentioned. Is there a certain wattage to look for?
@colonialroofingofnorthcaro4412 жыл бұрын
Good tasting music
@Donnythelatemodeltech2 жыл бұрын
kzbin.info/www/bejne/mX-yenydrsdgeck
@mikesautoservice803 жыл бұрын
I'm just gonna cut this shit! 😂🤣 Love the video, been trying to figure this out for awhile, never thought about the bracket idea, thanks for the info!
@smartfeller14955 жыл бұрын
I see what you did with the horn yet I dont understand how doing that makes it work. Because if that bracket is all the time touching that hub then why isnt the horn always going off?? It makes no sense to me.
@Donnythelatemodeltech5 жыл бұрын
The switch,,,,, "button" completes the circuit.
@jessierivera10034 жыл бұрын
@@Donnythelatemodeltech when mine is set every time the wire touched the metal it’ll honk the horn constantly
@lexus_outlawz3 жыл бұрын
Damn hope this works in my 1998 gs300
@user-ue5xb4th5i6 жыл бұрын
My hub came with 3 wires .. a red and green and a black ... for a mustang 04
@Donnythelatemodeltech6 жыл бұрын
Disregard the colors, extra third wire is for an accessory.
@user-ue5xb4th5i6 жыл бұрын
What do u mean accessory please explain more
@Donnythelatemodeltech6 жыл бұрын
@@user-ue5xb4th5i it's for a steering wheel that has an extra button, like for nitrous.
@user-ue5xb4th5i6 жыл бұрын
So what about the other two wires
@user-ue5xb4th5i6 жыл бұрын
?
@Happyguy605 жыл бұрын
Why does my horn not stop honking now lol please help
@OSOKCyber10 ай бұрын
the "airbag" is actually a clockspring i know this is from 5years ago but still
@PUMAOT Жыл бұрын
Now do it on an ls400
@RedHulk136 Жыл бұрын
Man everything worked besides the airbag light is still on