Replace Scooter Front Brakes & Adjust Rear Brake "How To"

[@Nthefastlane]

🛒 Shop This Video: www.nthefastlane.com/scooter-front-rear-brakes-store 🛒 Visit Nthefastlane's Amazon Store: amzn.to/3pP4UCy

[@shabbyshabster7937]

Being a first time scooter owner and having no mechanical background whatsoever this was super helpful.

[@DaniaBeech]

Excellent, even 11 years later. You've left you mark on humanity!

[@ChrisBethuy]

Thanks for taking your time to explain this front brake replacement... it made everything go smooth for me on my replacement.. Thanks dude!!!

[@Nthefastlane]

No problem Chris, Glad it helped!

[@JesseTrombley-td7hw]

Thanks brother! That was a little apprehensive about doing my front brake. No longer and he issues thank you that is my daily driver you help me immensely. Keep on keeping on brother,

[@civic2]

I'm actually upgrading my 50cc to a 100cc and I've been watching ur videos as reference so please the more the better thanx

[@user-wm8yj5lp2w]

I highly recommend this video, he does an excellent job in explaining the how to do it and I am very impressed and it does work very well

[@edwardrey484]

December 9 2024: What's the size of bolts need to fasten caliper to rotor. I've have 50cc GY6 scooter. Thanks 👍.

[@tomc.3987]

Great little video. That probably saved me about $100 - since following your instructions I can do it myself.

[@645squid_9]

10 years later still helped out thanks dude

[@JohnnySteelo]

Man I appreciate you

[@Nthefastlane]

Hey Johnny, means a lot. I appreciate your appreciation.

[@fredrikholm8047]

Good video, but since you didn't install new pads, it could be worth mentioning that you would want to put the pads back on the same side of the disc as they were before removal, to avoid having to "break them in" again. Also measure the thickness of the disc, so that it is in within spec. It will get thinner and thinner the more you use your breaks, and will eventually fail if not replaced in time, which could be very dangerous! Pads will of course also wear out eventually.

[@mastadon5344]

Great video ..easy to follow..my brakes are working good now!

[@joeecarbonee6849]

Man I learn so much from your videos brother👍

[@NelsonStJames]

Great video. I think I can actually do this !

[@JSTech2012]

Very good instructions.

[@tyronemoore4830]

That was some good info about changing brakes

[@SegaDisneyUniverse]

This certainly gives me a good idea of how to properly adjust and replace my disk brake, as I have the exact brand moped! Last time I got my disk brake replaced it costed me almost $100 for the mechanics to do the work for me. However, still kinda nervous of doing any sort of modification on my own moped, as I don't want to screw anything up.

[@gonebaddog123]

great video going to place pads and front rotor on my 49cc sprint bintelli sprint scooter and your video is what i needed not paying 80 dollars and hr for some one thats wnats to tinker with trying to figure how to replace it

[@jtruse]

Excellent video dude! Just did this on my 50cc and your video helped nicely

[@scanman3915]

I'm getting ready to do the same thing to my 1984 Honda Aero 80CC. Thanks for the info!!!

[@medicareplanningwithjohnde8751]

Very well done, efficient, planned. Thank you.

[@xaviervalo90]

Helped a lot!

[@chadsimmons6347]

" HEY NTHEFASTLANE "WOW im impressed ! My sisrers garage is metal pole barn with dirt floor where i ( LOSE ) about everything i drop on the ground " BUT " i love my sister & every inch of her 100+ acer missouri farm & ill bet your sister is nice THANKS-4-GOOD-VIDEO

[@borislavbijelic6248]

Very simple 👌 Good man Thanks.

[@jenniferjenraz3206]

Hi I was wondering how u adjust the front brake handle like you adjusted the rear nut for the rear brakes how do u do that for the front

[@dwv1000]

yeah, me too. Did ya figure it out? I'm assembling the one out of the box and on test drive. The front brake is on the soft side and really sounds awful when breaking.

[@gergelynagy874]

Fantastic, Thank you very much!

[@robertolsen5838]

Very helpful, thank you posting it on You-tube.

[@aaronnash1776]

Super helpful, much appreciated!

[@DeeJayRI]

Hi N...followed your instructions and my squeeky front brakes are quiet as a mouse. Didn't need new pads...just a good cleaning. I also adjusted the rear as you show in the video. My only remaining issue is the rear brake is still very squeeky but I don't see the brake assembly that i can access like the front.

[@kenspear129]

Great vid... thanks.. what size allen/star to remove pad bolts?

[@timcent7199]

The one that fits

[@ColombianCasanova]

good video, thanks, gonna change my brakes soon

[@Student2912]

Thanks for this video! I learned from it.

[@mikemelchiorre7414]

Hey , I'm glad you took the time to make such a quality video ; I seen you tighten the rear brake , but you didn't say how far would be too far , isn't there an indication of when the brake shoes need to be replaced ?

[@Nthefastlane]

Mike Melchiorre Pretty much you'll just hear them start squeaking.

[@jacobj5567]

Love the quality!

[@Nthefastlane]

Thank you Jacob!

[@noytube101]

really useful .. subscribed

[@change187]

helpful tips. Thanks

[@claschxtreme]

thank you, very useful info

[@seibles1]

Do you have a link for the pads for a 21 gator express front and rear also do you know witch left brake switch dose this bike use

[@chayo9548]

Great video. Today I got my front brake pads replaced and the shop charged me $95 for labor itself. Hell no. I'm gonna do the back ones myself soon. Thanks a lot

[@DuggleBogey]

Thanks!

[@Nthefastlane]

You're welcome Duggle!

[@soulvaccination8679]

you bailed me out..Thanks broski. But one question..I have a 2017 taotao 50 cc scooter(Thunder)Are the brake pads the same as what you used.

[@TKomoski]

Thanks we had that problem

[@AgeofReason]

Cringe intro detected. That said, the remainder of the video was actually informative and I appreciate it!

[@GalthT]

Just trying to get info on doing a rear brake fix on my oldest daughter and fiance's e city scooter. The right handle grips to the handle. Looking at this video the rear brake is on the left. But on theirs I believe it is the right? If that is the one for the rear brakes? The handle appears on, it's the cable that either is stretched or just bad. When I tightened the back bolt it seemed to work. Then would just go lose again. My daughter was riding one day and fell on the right side , causing the handle to hit the ground. Seems I may need to replace the whole cable.

[@flipinandpitchin353]

Quick question what size are thoes mounting bolts my scooters rattled out

[@telosfd]

I Still learning, thanks pal!

[@eivad1]

great video ty

[@waleednadeem2587]

Hey man does it work for electric emmo urban T bike

[@leonardosialeipata20]

😊Awesome thxz

[@bermudaguitar]

Awesome, thanks :D

[@jimsox881]

yeah me too bolts attach to Fork are Alan and all four are extremely tight. Any suggestions

[@KenkyushaK]

Should the rear wheel spinning freely when you move it with your hand? Mine doesn't and I'm not really sure if that is suppose to be like that or not. It's a new scooter.

[@buckmajor]

Thanks gonna try my one sir but do you have to bleed it? Do I top up with brake fluid? How often you have to change the brake fluid at what mileage or kilometers is regular change? My brakes are grinding so I need to change them.

[@jonmorgan1987]

Thanks bud. Live and let ride.

[@sinbizz386]

nice. thanks

[@victoriasuarez5453]

Thank you!

[@Visilicious]

How do Inget the length of the cable for the front brakes? Do you have that in inches?

[@mattr.1887]

For an electric scooter, the process is likely the same yes?

[@keiannschyler]

i have this problem after replacing my brake levers, my front brake lever is too far from my fingers. what i wanna know is how to adjust the lever a little bit closer to my finger so i can have a better control. my lever dont have a span adjusting knob... thanks in advance...

[@dcncchakma4599]

nice ur work ...

[@jerkygirlx]

Ty I thought I had to get new brakes but I just needed to tighten the bolt

[@catharinapersson6068]

when u have taken out the brakepads can u/i try to brake and see if the thing puches? please answer! good video :D

[@SuperAbolished]

+Catharina Persson yes. but you will have to push it in again

[@dwightdelano]

Great video, thank you...

[@DreamingWolfsMusic]

Hey brotha, I want to know if you can adjust the front brakes, I can't find anywhere where some one tells how to do it? My front brakes are so loose, there is nothing , not even friction at all.

[@chamaguac]

Thank you

[@davidl7134]

Do these brakes work for a jiajue 2020-21 50cc jj50qt-21 models??????

[@tha_mexikan1752]

does this work for the sliverwing

[@dr.michaelr.foreman2170]

It is an old video. Nonetheless, it does give me some guidance on how to adjust my rear brake as it has begun to drag.

[@Chris-se5ee]

How do I loosen the break pads for some clearance pleeease??? I pressed the break lever when I took it off , now there jammed shut.

[@ItzSkullii]

Same, how did u fix it?

[@Chris-se5ee]

ItzSkullii my friend opened it up with a clamp like the ones you use for wood work or metal work. Instead clamping down with you clamp it open

[@ItzSkullii]

@@Chris-se5ee oh thanks! I ended up forcing the middle part of a screwdriver in between it to make it wider and it worked. I learned my lesson I should have never press the brakes without it being on the disc haha

[@Chris-se5ee]

ItzSkullii haha yeah me too, I kept pressing the brake , won’t be doing that again

[@ookboy24]

Yo can you put links to the parts and cleaners and stuff

[@Nthefastlane]

I put the links in the top comment.

[@Nthefastlane]

Refresh the page if you don't see all of the products, sometimes it doesn't show all the products and takes a page refresh to display.

[@wesleywebb1058]

Where do you get the pads

[@Nthefastlane]

I always pin the store to the top comment, or in the about section of the video. Just scroll to the top and there will be a link. 👍

[@MurrayEstes]

thanks!

[@jst11234]

Sorry if this is a stupid question. But is it the same procedure for changing rear brakes?

[@banjeaux4922]

Helpful

[@Morpheus206]

hello friend, a question which is the name of the track being between the way the brake fluid and the clamp that holds the brake disc?

[@Nthefastlane]

+Alfredo Antonio Reyes Lopez Brake Caliper.. All Parts for all my videos will now be purchasable under all of my videos. rdy.cr/09f605

[@FrnnkEducation]

Thank you so much.

[@SyntaxScout]

good video

[@iamtito_thetruth]

can any pls direct me to the location of Brake Fluid Resivor !

[@iamirish4361]

After the mechanic adjusted the rear brake on my Vespa Primavera 2015, I put my scooter on my centre stand and it was stiff rolling backwards. I also felt it was difficult to depress the rear brake lever. There was very little play and it took quite a bit of force. Any thoughts? Great video, thanks.

[@Nthefastlane]

+Iam Irish loosen the cable a bit, might be too tight.

[@iamirish4361]

Thanks..will do that.

[@SoundsOminous]

thank you!

[@jonathanjohnston2066]

My 50cc scooter is a 05 and drives good on flat land but on a hill it only goes maybe 10 mph up it and sounds like it's bogging out what can I do to fix that ?

[@Nthefastlane]

Go to my main channel by clicking my logo to the left of this comment. Look at my "Scooter" playlist. Everything you need is in there.

[@davidhdearth-qp2vm]

I need to know how to keep front brakes from rubbing??

[@zachary3670]

HI please help!! i was riding my taotao 49cc moped. and for some weird reason the front brake does not work ?!?! i can bring the front brake handle bar all the way down. how do i make it tight? please help

[@allskoolguru]

my chinese scooter rear brakes are disc and the pads are touching the disc how do i adjust it? thanks

[@jamespitts4079]

What if I have the nut on back brakes screwed up almost all the way and my back brakes lever is squeezed all the way in?

[@Nthefastlane]

Then it's possible that your drum brake pad inside is completely worn out and needs to be replaced.

[@alonzwad]

I took my front tire off to change it and now the disc break is barely rubbing a little. we were really careful to work with the disc up and not bend it. do you have any suggestions of why it might be rubbing now?

[@sixstringzing]

Does anyone know what that metal tab is called. I lost that piece and need a new one

[@chrisheyward7498]

+David Currie what tab are you talking about

[@andrez906]

What about the brake handle what to do if its shaky

[@brucedodd237]

I like information

[@ElCincoSiete]

Cool vid...

[@supercoockie1]

damn. i like to mess around and slide 180 with the back brake. used to do it on a yamaha tzr50. i would just have to change the back brake pad a little often. but i see scooters dont use the same system. probably going to stop that on my scooter now that i know.

[@billc.riemers3245]

My front brake looks sort of like your back brake. My back brake looks completely different. Still seeing I could remove the front brake assembly gave me hopes this is something I can fix myself.

[@MyAcresOfDiamonds]

Do you know why my moped would be hard to roll backwards when pulling out of a parking spot? feels like the brakes are catching

[@turbocivic8694]

MyAcresOfDiamonds Have you tried spinning the wheels while stopped,both should be easy to spin with your hand. The rear is a simple adjustment if it has drum brakes and if its the front sticking then you'll need to follow the procedure done in the video or it may be a seized brake piston or calliper slides. Or another possible option is that your idle is to high with the back wheel in the air and the scooter idling the wheel shouldn't spin.

[@tommeldzuk0415]

Where is the best place to buy new pads, I bought a scooter with no front break pads (My Mistake) but if I wanted to upgrade some things as well... I don't have many scooter stores out here where I'm at.

[@tommeldzuk0415]

Wait... found your website, nevermind. :)

[@Nthefastlane]

Yes, I always link the parts in the each video to my top comment and in the description the video. It will say shop this video.👍

[@mellamodiego8458]

my rear brakes squeal when i apply the back break…what do you think is the problem?

[@rbeverley2006]

very usefull

[@1432kims]

Hello rich how's you x

[@rbeverley2006]

Good thanks, lovely weather for wimbledon.

[@1432kims]

Yes it is hope Murray wins x

[@1432kims]

Where ru

[@lukehill7678]

cheers!

[@BeatlessAnimations]

so a few days ago I took my recently fixed moped out for a ride, I noticed that when I was reving up it would go faster than drop speed significantly then go back to normal so no biggie right? wrong, so im close to home about to be there and the engine stops at a stop sign I assume its the idle but it really struggled to pick itself back up there like it was reving but just couldnt stay running but eventually I got it up just enough to get home. next day I tried taking it out for a ride and I was going up a hill fully reved and it started getting slower and slower with a car behind me too so I pull over and after it just wouldnt start back up, I could rev it but if I didnt rev it it wouldnt make any noise and it wouldnt move the wheels or anything, the carb is totally new and I did notice I had a fuel leak but I fixed the tubing and it was all good but I tried starting it up and it was still doing it so I dont know what the issue could be, any ideas?

[@Luckiestluckyman]

My brake on the right, the one used to actually turn on the scooter is loose as hell and I'm stuck I don't know How to fix it

[@johnnygreen5750]

my scooter cranks up and everything seem fine,only the back wheel is loose and when given gas the sooter doesnt move at all.