Nucular controller for Talaria Sting. Installation guide

[@regnardin]

Nice works !

[@DoK_ToP]

Снимайте больше гайдов!!! Shoot more guides!!!

[@BarkingStarDawg]

how fast does the sting R go with this controller + stock battery?

[@Daniel_fin]

90km/h

[@armandcapponi8949]

When I press the red button it won’t switch modes

[@ridingdirty2412]

very excited

[@clintroberts1]

Is a firmware update needed for the MX5. Why only an additional 3 KW for a 72V MX5 while aftermarket 72v on MX4 gives "300%" which would be 24KW.

[@NucularElectronics]

We can send you the firmware by e-mail. 300% is compared to the factory 60V battery and factory controller. That is, by changing the factory controller to Nucular P24F and the battery to 72V, you will get a power increase of up to 300%

[@aymenmahmod9981]

Does this work within the safety range of stock bms/stock motor. Or does it override and potentially damage stock motor and stock battery?

[@NucularElectronics]

As long you have temperature sensor configured for motor - it is very safe to use. Non-bypassed battery also pretty safe, but you should keep eye on battery temperature, high temperatures decrease life span of battery cells

[@nxdboi]

My phase cables don't seem to follow the "longer in the middle" of color code in your video. They are, however, labeled U,V, and W. Do I connect those labels to their corresponding letter on the controller?

[@NucularElectronics]

You can connect them in any order, autosetup will do the rest

[@nxdboi]

​@@NucularElectronics One more question. My screen turned on immediately after flipping the breaker, before I even turned the key. Is this a problem?

[@NucularElectronics]

@@nxdboi No, it is default behavior. If you have set disable button to switch in extra settings it should turn off after a breaker quickly.

[@nxdboi]

@@NucularElectronics Awesome. I finished the video and heard you reference it, so my bad for jumping the gun. I do have one thing that was not referenced in the video, however, there is a hissing sound coming the bike when light throttle is applied, before the bike starts to move. Should I be concerned? Did I do something on installation?

[@NucularElectronics]

@@nxdboi This is our Nucular Crickets (TM) feature ;) it is normal

[@venzpro23]

I have l1e mx4 and my stock battery was made by scud not greenway does your controller works on mine?

[@NucularElectronics]

You need setup battery settings in controller correctly and it should work fine, unless they have some vendor lock.

[@BarkingStarDawg]

how fast does the sting R go with this controller + stock battery

[@jorgensen.gt3]

Does that screen mount work with a stem lock?

[@NucularElectronics]

what is a stem lock?

[@clintroberts1]

@@NucularElectronics A stem mount is used with a direct mount to the fork. So no the stem mount doesnt hold the screen as you knock the internal piece out of the stem for the stem lock.

[@lomondcoyle9314]

As soon as I give it to much throttle, it just cuts power what’s the problem??

[@NucularElectronics]

please reach our support here: nucular.tech/support

[@Daniel_fin]

How can I update my controller, I try and it says error

[@NucularElectronics]

Make sure that your file not renamed and dont have any "(1)" or "(2)" in the name. Copy NContr.bin to sd card (FAT32) and insert SD into display. Start update.

[@Daniel_fin]

@@NucularElectronics 👍

[@GAME-808]

Talaria xXx specific Nuclear kit offering coming soon?

[@NucularElectronics]

Thinking about that, need to get the bike first :)

[@GAME-808]

@@NucularElectronics Perfect… Hopefully someone locally could lend there Talaria XXX for R&D purposes. In the meantime I’ll keep an eye out for updates on your KZbin channel. I also subscribed for news updates on your website as well 👍🏼.

[@waynewigger9904]

Would you say its safe to by pass my 2 sting batteries both have your p24f controllers ?