Nugget Garage - 13's for $1300, We TURBO the N/A BARRA and SEND it!

In this episode we take our $400 non-turbo Barra powered stocko Falcon and slap on a turbo and give it grief on the dyno before taking it out to race the other teams for the challenge.
To see the rest of the teams and to check out the complete challenge check out Overtaking Lanes coverage here: • Budget Drag Racing - W...
Check out our mates from Overtaking Lane here: / @overtakinglane
Social Media: Keep up to date with our Facebook and Insta pages,
Instagram: / nuggetgarage
Facebook: / nuggetgarage
Music: www.bensound.c...

[@Tube4TTT]

You guys need a 3rd driver named David so the door can have "David Ethell Hoff" on it

[@raceprep]

Should show more of the fab work, even if it’s more dodgy that woody facial hair.

[@justhetipinsiderbutt8964]

Shred Shed lol the porn stache

[@10GTE]

Haha yes!

[@davidprasad290]

The titles misleading Should’ve put 12 for 1200$ Your view count would go higher! 😂 Good shit boys, keep it up! 💪🙏

[@NuggetGarage]

Check the thumb nail..... lol

[@plumbs7199]

Please keep going ?? I think we would all love to see how far you can push a BA na Barra ?

[@johnnym1320]

Should have added knee pads to the budget 🤣🤣🤣

[@mechtechau]

This comment deserves way more likes! 👌

[@bensonhedges479]

First thing I spotted hahaha gave me a good laugh

[@Billo-07]

Ill give anyone $10 who can show me how you put a car on a 2 post lift without getting on your knee's.

[@johnnym1320]

@@Billo-07 it was a joke bud

[@Billo-07]

@@johnnym1320 Same. I wasn't sending anyone 10 bucks lol

[@lucastopham4234]

12's for $1200

[@michaelgleeson1198]

Awesome content from you guys and I've already watched the Overtaking Lane video which was great and great to hear that you offered other competitors the use of your Dyno that's great sportsmanship on your behalf

[@shortredman1]

$100 and a reach around hahahaha :P

[@bm4n1]

Awesome stuff dudes - DIY kiwi here this loves this sort of stuff and NG is a must watch - thanks!

[@tobo26]

Classic Aussie "She'll be right mate" attitude.

[@logical_volcel]

cut a rusty datsun 120y's firewall, shoehorn the driveline with a welded diff in, sit in the back seat and you should run a nice little 10 atleast

[@scottinWV]

It's shows your true character that you offered the other guys use of the dyno! You two are true gentlemen sportsmen!

[@mechtechau]

You guys know there's a fella doing fundraising for cancer council on Facebook with 'shitbox edition' in block letters on metal decals. Tailor made for this rig.

[@mechtechau]

And just saw it at about the 16min mark, well done lads. 👍

[@slothcunt8353]

Turbo even has custom graphics!! Bargain I say

[@brett174]

Shitbox edition bahahahaha

[@kiiiisu]

i have been waiting for this! :D

[@craigmandall9420]

That VR sounded mangtastic. Music to my ears

[@nitronaf]

loving how you blokes are getting better at videos. good stuff keep it up

[@motoray69]

Use the factory window washer bottle and pump. Stick carburator jet in the end of the tube for adjustment and atomization. Cheap and effective.

[@boboften9952]

11:08 watching those needles swing hard right . 6lbs boost two and half thousand revs.

[@FuelInjectionSucks]

I'm a fool. I've been giving away stuff for just a handy. I should have been getting a handy + cash.

[@hcfcustoms]

Ha I did a compression test on one recently same thing oil in the spark plug holes/above the plug on some but ran perfectly 😆bloody unbelievable!

[@HomieJeans]

More power than my F6 Typhoon 😢

[@agga3955]

Wow you actually bought an FPV when a standard ford does the same job if not better 😂 with money left over too.

[@mechtechau]

@@agga3955 see how much more the F6 is worth than the modified regular Ford in 10yrs time. 😂

[@chris929rr7]

Yeah but the F6 looks hot af! You should be proud of that beast. It was an F6 tune they baselined this car with they just didn’t load the auto box part. Meaning yours is only a couple of mods away from big power numbers too. Get some bigger injectors and a flash tuner to start with.

[@bensonhedges479]

T Dawg shhhhhh shut up everyone’s gonna keep em

[@tx5brent]

If you are going to keep drag racing this thing, I think you should do the S3 and S4 solenoid delete. This is the best way to make the auto last, unless you have figured out how to adjust the shift time (not line pressure) in the tune. I had a quick search for BA ECU pinouts, looks like S3 solenoid is on pin A17 and solenoid S4 is on pin A18, trace the wires, cut the wire, leave trans side of wire flapping in the wind, ground ECU side of each wire to ground via a 27 ohm, 5 watt resistor (the big white ceramic jobbies). That will make it last. It does sound like its shifting pretty well at the moment, which is surprising for an old BTR. Keep up the good work blokes

[@shaneanning180sx]

thats sick good job

[@stuartjohns2779]

Nugget + $100 reach around = awesome nugget. Love the video as always guy's. The only thing i can say is it would have been great to get a build video then a drag video. Anyway's only a suggestion love all your vids great to see you guy's get a win👍👍👍🥃

[@adamheazlett1179]

Come on those knees need a bit cleaning You are an Ambassador for Australia we have to promote a healthy and happy living environment.Showing dirty Knees is not the look of Bronzed Aussies.Stand up be Proud and have a laugh .Have a Good one ..Adam

[@jamesbaylis9438]

Great work Guys, keep it UP!!!! But I think you need to see if we can get a visit from Uncle Rodney

[@gavinb9627]

You took up the challenge and didn't get all serious with it and made so awesome videos. There were lots of smiles and laughs, that has to be a win

[@timsmith854]

Who doesn't love the sound of a V8? But you CANNOT beat the cheap HP you get from bolting on a turbo. My mate spent $10K on a Cleveland that was good for 60K. It was an excellent engine...but the price. I have got 50% gains at the treads just by turning up my boost (still safe), adding a cheap Chinese intercooler and remapping the factory ECU. Love the channel. Could you be a little more Aussie, though? I want to see a Ned Kelly tattoo or the Southern Cross and always wear a stubbie holder with no bottom on your wrists yeah? Then you would fit in well in my country town. :)

[@ccotton196]

Great video guys, love what can be done on such a small budget and also how modest you are ... time for some more nugget garage stickers

[@NuggetGarage]

Thanks mate, Stickers/Shirts are coming soon.

[@j1m3by]

Awesome as always! I was just wondering what you were doing with your hand in your pocket while discussing Frozen? LOL

[@Jestaname]

We both need to change our kmart shirts for nugget garage shirts lol HURRY

[@jrobpat0154]

Why not a windscreen washer for the water/meth injection ?

[@morgancaldow4507]

Well done guys. Thats great what you did with the ba. Should do a burnout one or best offroad cheap family car.

[@ShainAndrews]

"No good deed goes unpunished" - Turbo Yoda

[@DaveHiggoHiggins]

Seems Like Al was the real winner.. ha ha ha Great stuff as always guys. Crazy how well it ran.

[@MrBundyjr]

watching these legends makes me feel proud to me from the mud flats. shout out roothy

[@NuggetGarage]

Roothy is a legend!!!

[@hiboostchosh]

Loved this series so much, love seeing shit none turbocharged motors getting boost and making power

[@dylanenricholeroux7163]

10s for 2000 sounds like a great idea

[@Thedmcke3]

Well done fellas! I come for the falcon, stay for the Dragna content!

[@WarriorPleb]

12s LIAR! fake title

[@justin3131ify]

Auction the car, or at least sell me the manifold, turbo, gate and exhaust setup... 💓

[@ziggassedup]

That's more that $1300 worth of fun.

[@SUPERCOACH360]

thanks blokes, loved the challenge from start to finish, bring on the nxt project

[@suprasteve95sz]

Awesome work... Highlight of the week is when your vid drops

[@markcozzie]

Nice/funny entertaining project 👍 Should've used the front screen wash for the water/meth injection? ,👍

[@mg74xbgt]

Good to see our EA Falcon when you ran the 12.7 were out doing base runs with it and ended up with 16.9 ... not bad for center fire injection 300k engine and manual :). Loved the series and hope that we/others can join this year !! :)

[@chris929rr7]

Lol have a go at the front bar! May as well take it off and throw it away. Bloody thing would probably chop my l98 calais though.

[@slawski81]

This was a fun one legends 🤙🏼 can’t wait for the next project

[@utesmate]

Either your bad at maths, or Al didn't get his $100 after his reach around?? I think your calculations are out!! Top effort anyhow!!!

[@hogtownhenry]

Just shows to go ya. You can pick up a cheapie, throw a hair dryer and a quick tune and run as hard as the big boys costing 000's more. All for fun and a continuous smile. All using the OZ phrase "She'll be right, mate."

[@dreamitbuildit1380]

Awesome video guys, thank you. 😁

[@johnelkio4393]

That's why you go with the mighty vr lol

[@nos4me]

Lol 6lbs at 2400 and the 1jz commodore can’t even do 3lbs at 3k.. wtf

[@izacr106]

Hahaha 12s pretty churr and glad you won against the holden👍

[@elrico_espinoza]

Bloody well done fellas! A 12 sec is worth writing home about!

[@idrisddraig2]

Sloppy Mechanics would be proud ;)

[@chrisoh6627]

I went and saw frozen 2 with my girls, they enjoyed. I thought the town was going to get wiped out by the dam letting go. Oh the suspense!

[@NuggetGarage]

Haha i went with my 3 girls and 2 boys, the boys are what caused the toilet breaks

[@MrCliffep]

10s for $2K but kept street legal,there is a challenge

[@jamesruralsparkynz3504]

This was a cool series to watch guy's 👌 P.s thinking of you Aussies from across the ditch with the bushfires.

[@chris929rr7]

I have read that you cant run a boost T on a barra with much success. Something about the ECU sending the car into limp mode if it senses a boost spike?? And no intercooler too wtf how many runs do you get before the whole system is overheating. Need another $1300 to be done properly i think.

[@chris929rr7]

Who can fab xr6 ba forward face plenums? i aint paying 1300 let alone 2k for one! the whole bloody car only cost 4k.

[@DailyBadDecisions]

So the torque reduction worked by putting it in 2nd? I’m having an issue where in mine if I boot it it’ll shift itself to 2nd or sometimes 3rd. I have a haltech plug n play.

[@samoneill8685]

Frozen gang

[@westie4ageturbo.749]

Great work blokes! Bit surprised by the 12, well bloody done!

[@suronsoon8913]

It alway the cruiser pulling Henry forward....

[@tmmtmm]

This car is now the wet dream of the previous owner who put that kit on it

[@22mangles]

Cheers for the great content as always

[@joelziebell4043]

I don’t know how many times I’ve watched this. I love it! When is it going to willowbank next?

[@pdelmo79]

two top blokes.

[@stinky_bozo2604]

hey im coopah meridiths friend and just wannna know what i gotta do to make 300rwkw to a silvertop barra, would i neeed to replace rods and valve springs to accept boost or whats the go

[@jarrasoden3559]

Ba diff cradles are the easiest thing in the world to remove. I did my apprenticeship on them.... done more diff bushes than both of you have had hot dinners!! Lol

[@moxyface267]

Al got a reach around!!! 🤣🤣🤣

[@vtwin_vandals]

Good ole Aussie ingenuity !

[@audiesparks3556]

How do I get hold of you guys I want my race car put on a Dyno it’s turbo any help thanks how do I get hold. Of you

[@triggsonelectronics1249]

Thank you guys. While many will say the build, the car and the challenge was your enjoyment too. I have no doubt the video editing and shooting was for all our benefits. So, for that I thank you both very much. My only criticism, i believe where the vehicle lacked was in having such a heavy tune on the engine while running stock parameters on the gearbox. But thats nit picking. Im impressed

[@NuggetGarage]

Thanks mate. It actually didnt hold up all that bad even with all the torque reduction on shifts removed. Its fun to hate on it but really it all held up bloody well.

[@triggsonelectronics1249]

@@NuggetGarage mate, i don't wanna hate on it at all. Im a Ford man when you raced that Commodore i cheered for ya falcon like it was an AFL grand final. May i please ask, if you were to do anything differently than you did. What would it be, and why? Thanks guys

[@NuggetGarage]

I guess i regret not road testing it and finding the gremlin and not running a 12 first hit. The car isnt registered so i guess we didnt really have a choice.

[@triggsonelectronics1249]

@@NuggetGarage thank you again guys, i honestly am impressed.

[@d4zzyb]

Oaken - Yoohoo... big summer blowout 😂

[@thegingerpowerranger]

Shame you didn't get the footage of giving turbo Yoda a reach around in this episode

[@bnetolldnataman]

The Ginger Power Ranger 🤣🤣🤣🤣🤣🤣. Nobody needs to see that you sick f##k. 🤣🤣🤣😱😱😱

[@thegingerpowerranger]

@@bnetolldnataman toll dnata ftw!

[@suronsoon8913]

Shall be right Henry, Ford is strong...hahaha...

[@8wireracing694]

This is glorious...

[@1one3_Racing]

That wastegate is nuts! It's bigger than the exhaust.

[@tylathemenace4859]

Hey mate do you have a link to the fuel reg, looking at turboing my AU but cant find any fuel regs

[@NuggetGarage]

rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F192433690641

[@shreda125hilux7]

Better and cheaper than turbo taxi

[@simonplant5179]

I have 2006 xr6turbo injectors you’s can have

[@simonplant5179]

And valve springs

[@NuggetGarage]

Hey mate, thanks for the offer, The injectors are actually all the same in the range but its the fuel pressure reg that differs, this is how we got around the fuel side of the conversion

[@Easyasinstallations]

Bloody impressive! $100 ($250 new) China turbo, NA motor with close to 300000km on it, crappy BTR, open Diff, no Intercooler (almost 80C iat’s) running 12’s and making 370rwhp. 😂

[@RangieNZ]

"$100 and a reach around" LOL

[@chrismcencroe9111]

Love it guys. Very Entertaining.

[@ldnwholesale8552]

Never weld a Falcon diff. Minispool is cheap and solid. Though a 3.45 XR6 diff gears is what you needs, more so with those big tyres. Water injection? Windscreen washers do the job. Temps? A bag of ice into the intake path.

[@bioshock425]

crank the boost n see what happens

[@Vrgaming-z5h]

Hey man do you have a link to purchase the hp tuner

[@bensonhedges479]

That’s pretty ridiculous numbers for a stock engine, wonder how long it’d last daily driving at 350hp

[@boboften9952]

KEEP AT IT BOYS. KEEP AT IT. KEEP GOING

[@adrianawg82]

Big guy needs to stop talking and let scotty speak...

[@adamheazlett1179]

How about $1000 from auction Fluids check replace and run Should be cool but same make would be better. Falcon v Falcon .Commodore v Commodore or mix it up. Average Joe does not have contacts you fellas have. Great for young blokes getting into cars .Fun not money but with safety in mind.Cheers Adam

[@jase666ify]

hey fellas, i want to do the same thing on my wagon whats the cheapest way/dongle to install the f6 map do you have to buy the hptuners mpv12 then the credits. or better of getting the sct x4 but its more expensive and you can only use it on the one car

[@V8TVAustralia]

I watch all your vids

[@izacr106]

Hahaha suprising aye boyz ha,got potential.. fuel pump hit 400hp...#barrafaith

[@noremaccystoms2195]

Mazda 3 turbo map sensors are plug and play

[@rockroller1829]

the cock drawn on the turbo is epic lol