The Best Tool Cart

[@Spyke383]

I love that style of roll carts, back when I was in the dealership I took my macsimizer home and just worked out of a mac 5 drawer cart for 3 years as a lead diesel tech. You'd be amazed how much shit can get stuffed in one.

[@NutsandBoltswithTone]

Thank you for your comment, I agree I can do so much with just my cart.

[@greasee.monkey7224]

I like the way your cart is setup. It looks like it eliminates repeated trips to the toolbox. I bought a 3 drawer cart & really could use more drawer space in my cart. Thanks Tone!

[@NutsandBoltswithTone]

My pleasure, thank you for watching brotha.

[@MechanicalTriage]

Kick ass setup. Very efficient and complete.

[@NutsandBoltswithTone]

Thx man I appreciate that.

[@bittercreekscvs]

Love the setup. I'm collecting all of the orange handled Snap On pliers. I LOVE them! I went to WyoTech for Diesel Technology back in 2008. I am a heavy truck mechanic wiring in crude hauling trucks in Wyoming.

[@NutsandBoltswithTone]

Nice man. Thanks for the comment.

[@niallcosgrove5596]

Great set up, this it was young mechanic's starting off should all do. Buy a cart fill it with the best tools you can afford at the time as you have done. Very well set up good video to post

[@NutsandBoltswithTone]

Thank you very much. I agree completely.

[@fatkorn]

Dirty, beat up, well used tools are the best. Love to see a set that someone actually uses. I've kinda noticed that the harder a dude works the less tools he needs. Very cool broX.

[@NutsandBoltswithTone]

Thank you and I appreciate the feedback

[@andyhodgev.a.g1291]

You have just come on my flow now following on here as i do on TIKTOK absolutely love Tone’s Tool Tuesdays, top fan here from the UK 🇬🇧 😃

[@NutsandBoltswithTone]

Thank you very much I appreciate that. I missed this last one been busy. I will get back on Tuesday's. Thank you for watching. I have a lot of great things coming stay tuned.

[@Anthony-wj6xb]

Honestly, Sunex wasn't blowing smoke. Your set-up is sweet.

[@NutsandBoltswithTone]

Thank you very much I appreciate that. Thank you for watching.

[@Toyorulesitall]

Nice assortment of tools. Tekton tools are my brand of choice. Enjoyed the video also.

[@NutsandBoltswithTone]

Thank you for the reply, I actually currently editing a video with some tekton sockets, watch for that this week

[@jasonmckeaigg9143]

I put 6 inch wheels on mine..looks cool plus easier to roll outside if need too...thanks for sharing 😷👍

[@NutsandBoltswithTone]

Did you have to modify at all to do that and did u do whole casters

[@JustinDowDIYcentralhighway]

Thanks for the Tour 🍻😎🤙

[@NutsandBoltswithTone]

Really glad you enjoyed because I really enjoyed taking everyone on the tour. I have spent a long time getting this cart to be the way it is.

[@brokenraven4908]

Cool set up bro i really like that cart!!!

[@NutsandBoltswithTone]

Thank you. It's taken me awhile to get it just right.

[@richardburns9772]

Looks like you get stuff done in that shop! Great vid, thanks for sharing

[@NutsandBoltswithTone]

Thank you. Yes definitely get things done. I appreciate your comment.

[@kj55]

I really like that little side table thing you have going on with your sockets and whatnot it wouldn't work for my line of work and the way that I work but I think it's a great idea

[@NutsandBoltswithTone]

Thank you. I couldn't imagine not having all my ratchets on but yeah for sure not for everyone.

[@jameshaggard6074]

Thanks for the tour, dig the side tray will have to copy

[@NutsandBoltswithTone]

Thank you, I appreciate it. Glad you enjoyed.

[@heightskings6693]

I wanna copy your fixed tray holder , such a good idea

[@NutsandBoltswithTone]

Thank you I love it too as well. Thank you for watching.

[@Itsdazeni]

nice tour bro, pretty loaded I like the side tray you made for th extensions and pry bars!

[@NutsandBoltswithTone]

Makes it super efficient

[@robertmunoz11]

Good video nice set up badass to see a box with tools that are used

[@NutsandBoltswithTone]

Thanks man. I appreciate it, and that is exactly why it's set up the way it is. 🍻

[@robertmunoz11]

Im a heavy duty mechanic i use my tools but i clean them but seriously you see some reviews where they don’t even know the names of the tools and they are spotless and don’t even have dust in the drawers like come on there are mechanics tour’s then there’s tool collections there is a difference again nice setup

[@NutsandBoltswithTone]

@@robertmunoz11 omg so true. I try to wipe mine down but it's hard to always wipe all of them off all the time. My tools are for sure used allot.

[@kylesonsalla7620]

Good looking setup! Love that side tray

[@NutsandBoltswithTone]

Thank you. It definitely is a game changer in efficiency for sure.

[@kylesonsalla7620]

I have a 30 inch 5 drawer HF cart currently, have a Husky power tool holder and the can holder on one side and a side tray on the other, might have to sacrifice the side tray and drill some holes in it

[@NutsandBoltswithTone]

@@kylesonsalla7620 is the side tray you have for parts? Like a flip up tray? If so probably will not be able to support the weight. If you would like i can get you some pictures of an over view of my side tray for reference.

[@kylesonsalla7620]

@@NutsandBoltswithTone It's the flip up one they sell for the carts. It's pretty strong, I had my 3/8 14.4v impact, my MG725, a bunch of sockets, extensions, pry bars, wrenches, etc on it today taking a DPF out of a T680 and it didn't flex at all. I was more thinking just around the perimeter though to store my ratchets and some more pry bars. All the holes inside the lid are taken up with tools already.

[@NutsandBoltswithTone]

@@kylesonsalla7620 that sounds awesome I think you will love it

[@isaacbiggs3958]

Heyy I used to work with this guy. He's a beast

[@NutsandBoltswithTone]

Oh yeah, what shop?

[@TurboTyTy]

Way to utilize your real estate 🙌🏼 I love the video dude, sound is crisp and clear and the image quality is clear . You have an awesome collection of tools, I have those same Matco pry bars, I love them unfortunately I left one on the frame of a bus and off it went 😭 lol

[@NutsandBoltswithTone]

Thank you so much, very kind comments. Sucks about your pry bar. I still need one more pry bar I want a bigger one.👍

[@NutsandBoltswithTone]

I'll be continuing with the content, tool reviews and also fixing and diagnosing. Make sure you subscribe so you don't miss any.

[@kylesonsalla7620]

@@NutsandBoltswithTone Mayhew Dominator bars(the same as your Matco without the markup) go up to 58". I'd recommend the screwdriver pry bars too.

[@NutsandBoltswithTone]

@@kylesonsalla7620 thx for the advice I'll check it out, I actually do need to buy a 58 inch pry bar, that's the one I do not have. I appreciate your feedback.

[@TylerKnouff]

Awesome cart!

[@NutsandBoltswithTone]

Thank you very much. I appreciate you watching.

[@victorortega5158]

Cool car looks very organized..

[@NutsandBoltswithTone]

Thank you very much. I do keep it very organized, always know if I have any tools missing.

[@ryanbaircraftmechanicandsm7524]

Nice. Tour. I am a aircraft mechanic use a lot of 12pt because it’s aviation. I also do automotive stuff on the side for fun. I have been meaning to get those Vampliers because snap on makes screw extractor pliers but at so expensive

[@NutsandBoltswithTone]

Thank you. I appreciate the comment. Yeah the vampliers are awesome

[@JustinDowDIYcentralhighway]

Cool Idea making your own end trey

[@NutsandBoltswithTone]

Thank you.

[@pra5907]

the 18.5mm 19.5mm socket is actually for ford wheel nuts for when the chrome cap on the nut is either swollen or missing

[@NutsandBoltswithTone]

I appreciate your feedback but actually newer vehicles are starting to have that size as standard size, my coworker just had a newer vehicle yesterday.

[@pra5907]

@@NutsandBoltswithTone www.amazon.co.uk/CTA-Tools-4221-Socket-18-5mm/dp/B01D4QBH7Q the same tool you have read the description on what is designed for

[@NutsandBoltswithTone]

@@pra5907 omg thank you, I actually never read the description, I bought it because it looked like something I may need in the future and I have. But in the same token im pretty sure I've needed it on some newer vehicles but I could be wrong. I'll keep an eye out. Thank you for catching that.

[@kylesonsalla7620]

They're used on a lot of different vehicles, you can get a 2 flip socket set with 4 half sizes.

[@NutsandBoltswithTone]

@@kylesonsalla7620 awe man thx for the reply, I wish I had bought the set, I bought that socket awhile ago and they didn't have a set on Amazon. I'll have to look for the other socket now.

[@JimmyMakingitwork]

Thanks for the tour!

[@NutsandBoltswithTone]

My pleasure hope you enjoyed it.

[@JakeNaughtFromStateFarm]

I’ve got the same cart in black. Got it on OfferUp for $250. I want those Vampliers, things are badass. There’s another brand of them called Engineer pliers, I believe it’s what it’s called in Japan. Same thing, just a bit cheaper and green handles.

[@NutsandBoltswithTone]

Very nice, awesome price you got it for. Yeah those vampliers are awesome. Thank you for the comment.

[@nitrous07me]

Very nice cart 👏👍

[@NutsandBoltswithTone]

Thank you, I have worked hard and put alot of thought into the placement of everything.

[@fishingmontana1564]

I need one of those big magnet on the lid to hold the tools I am using on a job

[@NutsandBoltswithTone]

It is from Snap On. was on a tray with handles but I threw away tray as I was only going to use the magnetic portion. Thank you for watching.

[@JimmyMakingitwork]

I find myself looking for a replacement tool cart now. How has this Sunex been holding up? Would you buy it again? Thanks

[@NutsandBoltswithTone]

Thank you for watching, the cart has held up amazing. No problems with the cart and I would definitely buy it again. I would have to move my side tray to the new one or build a new one.

[@elmerfudd6291]

real mechanic

[@NutsandBoltswithTone]

Are you asking me if I am a good mechanic.

[@elmerfudd6291]

@@NutsandBoltswithTone i am confirming that you are a great mechanic 👍

[@Mark-ih2qe]

Informative, good video.

[@NutsandBoltswithTone]

Thank you brother.

[@Beckiiss]

Sweet setup!! 😁👌🏻

[@NutsandBoltswithTone]

Thank you very much.

[@agtech4580]

Nice cart do you have a part number for those heater hose pliers I need a set of those

[@NutsandBoltswithTone]

96600 Heater Hose pliers are SP Tools UNIVERSAL HOSE PLIERS FITS 1/2IN TO 3/4IN. Thank you for your comment.

[@gregblau8082]

Nice tour. That 3/8 17mm swivel is the only one I’ve broken and they sent me a new one in about 3 days. I started with the ez reds you have to flip and they’ve been great but I have upgraded to platinum and mountain as needed

[@NutsandBoltswithTone]

Oh man that's awesome to hear someone else have a great positive experience. I never had the ezreds that u have to flip, but I can see how they could come in handy in some cases. Thank you for the feedback, I appreciate it.

[@gregblau8082]

I was supposed to be buying the platinum set from this guy but he couldn’t find the 8/10 so he offered me the ez red set he just got instead and they were a lot smoother. I’ve backed myself into a corner with them a few times and you’re right about the offset helping with stuff like pulleys and window regulators

[@NutsandBoltswithTone]

@@gregblau8082 omg yes I have gotten stuck up against a fender or something like that,

[@tomgoodman3775]

Great video. I like the side tray. What is the make and part numbers of your 90° strippers and heater hose pliers? Also, where did you find the small pry bar you use for oil pans?

[@NutsandBoltswithTone]

I will get you that information on Monday. Thank you for the comment and feedback

[@tomgoodman3775]

@@NutsandBoltswithTone Awesome. Thanks.

[@NutsandBoltswithTone]

Pry Bar is 4140 Sheet Metal Skin Wedge. Heater Hose pliers are SP Tools UNIVERSAL HOSE PLIERS FITS 1/2IN TO 3/4IN. 90 degree strippers are OTC. Hope that helps.

[@tomgoodman3775]

@@NutsandBoltswithTone thank you.

[@robbydiesel9345]

Awesome thanks for the info

[@NutsandBoltswithTone]

No problem.

[@nanqi521]

Very nice cart. Bought multi tool that you recommend and swag tool. I was looking for that tool for a while too. I was doing vw injector o-rings though that tool will be handy to have or when doing any nylon o-ring. What brand are those air swivel fitting that you have on your air tool? I had some on my air tool in the past, but these don't last very long. Really enjoy your videos.

[@NutsandBoltswithTone]

Thank you so much. I will look at the brand on monday. I've had those fittings for quite some time. The swag tool is the best.

[@NutsandBoltswithTone]

There is not a brand on the fitting itself, I found this which looks exactly the same. Coilhose Pneumatics 59-06BS 3/8” Automotive Ball Swivel Connector, 3/8” MPT I bought mine from the Snap On truck.

[@nanqi521]

@@NutsandBoltswithTone Thanks a lot.

[@skylerbrycesmith]

I wish I didn’t have to lock my boxes up so I could build a side tray like yours.

[@NutsandBoltswithTone]

That would suck, I am happy I have never had to do that, however hou could fabricate a lid that goes over the side tray, you would still have to put ratchets in cart but could have a metal cover that goes over tray that locks from and rear. Just an idea, if I needed to lock my tray up I could make something to do so. Thank you for watching.

[@gilmansgarage6341]

Wow she is loaded, nice set up . must have 5 hundred dollars there, as most customers would say..lol I have most of all that stuff, but it is always amazing to see a few things i haven't seen before.. Thanks again great video's!!

[@NutsandBoltswithTone]

Thank you for the reply. It is loaded and definitely a few more then 500 bucks. lol.

[@mortenholt3805]

Where did you get the holders for the sockets

[@NutsandBoltswithTone]

They are on the rails they came with and I screwed them down to the cart with self tapping screws

[@mortenholt3805]

@@NutsandBoltswithTone ok thanks

[@franklinjulianbautista5727]

Exelnte saludos muy bien vídeo

[@NutsandBoltswithTone]

Thank you very much.

[@luxuryacuraz]

Great Video

[@NutsandBoltswithTone]

Thank you.

[@codelicious6590]

Unlike many "toolbox tours" this one you can tell is in heavy use. Are Sunex manufactured in the US or Canada?

[@NutsandBoltswithTone]

Thank you and you are correct very heavily used. Sunex Tools are manufactured in Taiwan from what i researched.

[@NutsandBoltswithTone]

@@codelicious6590 very true. I like the impact sockets.

[@johnb1121]

How is the cart holding up??? Is it top heavy?

[@johnb1121]

Please respond...

[@NutsandBoltswithTone]

Omg the cart is amazing. Holds up great, it's not top heavy at all. My only problem is honestly I put too many tools so it's heavy. But I couldn't take any tools out. I wouldn't trade my cart for anything.

[@johnb1121]

@@NutsandBoltswithTone ok Thanks 😍😍😍😍

[@johnb1121]

How much weight do you think you have in it???

[@codyfinchum890]

Hey cornwell has 80 tooth same as snap most of the new snap are 80 and the cornwell matco gearwrench all interchange

[@kylesonsalla7620]

But Snappy is DUAL 80, like 160 teeth. Only stuff that really comes close are 120XP's. The 88 tooth Matco feels notchy comparably. I have both Snappy and Matco and only reach for the Matco if I need the locking flex head.

[@NutsandBoltswithTone]

I do not think anyone can compare with Snap On for feel of the ratchets.

[@NutsandBoltswithTone]

I have a couple Matco 3/8 inch I use quite often only because of the type of ratchet it is, I really should replace them with Snap On and take Matco ones home.

[@tonytooltime5373]

Hey man, Those Long EZ Red ratcheting wrenches are Reversible.

[@NutsandBoltswithTone]

Yes they are. I was talking about the skinnier ones that are not reversible.

[@jacobn516]

What part number is that 1/2 short flex head wratchet?

[@NutsandBoltswithTone]

I'll let you know on Monday morning

[@NutsandBoltswithTone]

Skf80a let me know if that is the ratchet you were talking about. Snap on

[@jacobn516]

@@NutsandBoltswithTone yes sir it is thank you

[@NutsandBoltswithTone]

@@jacobn516 happy to help

[@codyfinchum890]

Your big matco ratchet will see high failure rate once you go to a 1-1/2 nut even if you heat the nut orange it will fail the shop 3/4 gun sucks and I had to build a subframe for a trailer great tour BTW

[@NutsandBoltswithTone]

Thank u.i bought that ratchet many years ago, would have for sure bought a snap on one of i had bought it recently for sure. Thank you for the feedback. I appreciate it.

[@TheToxiicLover]

new sub here. love the side table you got going on, would you ever consider selling them?

[@NutsandBoltswithTone]

Thank you for subscribing. Glad you like the addition to my cart. Are you asking if I would sell my cart or just the side addition?

[@TheToxiicLover]

the side addition, looked all over the internet for something similar only see the harbor freight version.

[@NutsandBoltswithTone]

@@TheToxiicLover I'll have to see what it would take to make another one I'll let u know.

[@TheToxiicLover]

thank you!

[@NutsandBoltswithTone]

@@TheToxiicLover your welcome

[@John_Rod]

Whats the part number for the tool in 13:44?

[@NutsandBoltswithTone]

Snap on FZ936A Thank you for watching

[@shoppcilla6997]

lol Thanos is that you ? On god bro that it was some one else though you know jaja

[@NutsandBoltswithTone]

Haha I have heard that for sure. Thank you for watching the video.

[@michaelmangino9819]

Nice vid

[@NutsandBoltswithTone]

Thank you.

[@alexcardenas4195]

How do you secure your tools on the tray, so they won't get stolen

[@NutsandBoltswithTone]

So that is the tricky part. I work with only 4 to 5 other techs and have never had to worry about that thankfully. When I have needed to lock it up I just throw all my ratchets in the top compartment.

[@mrbananamanification]

Part number on those weird bent needle nose ???

[@NutsandBoltswithTone]

Tomorrow morning I'll get that to ya.

[@NutsandBoltswithTone]

I am thinking you are talking about the Matco PN890 but they are made by Knipex

[@SugeRealest]

Maybe i been lucky but never had a balanser problem

[@NutsandBoltswithTone]

I am happy to hear that you have not had a balancer problem.

[@RepairsforOats]

Nice cart! You've got a nice set up going for you. You might know me from Instagram as Repairs for Oats

[@NutsandBoltswithTone]

Thank you so much and I do know you from there. I love following your Instagram stuff. Thank you for the reply.

[@joshuaspencer6246]

7:20 focus you flock

[@NutsandBoltswithTone]

Thank You for watching. I try to focus but cannot always focus perfectly. Hope you liked the content.

[@MattJonesYT]

@@NutsandBoltswithTone There might be dust on the lens

[@OneMechanic]

You definitely have it loaded ... lol

[@NutsandBoltswithTone]

Yes I do. Try to be able to work all over the place.

[@T6Tarek]

Go away dave!!!!! 😚

[@NutsandBoltswithTone]

@@T6Tarek what do you mean?

[@OneMechanic]

@@T6Tarek I try but I keep getting lost... lol

[@OneMechanic]

@@NutsandBoltswithTone Tarek is a buddy ... lol

[@WizzRacing]

My tool cart is a plastic tube and lid...

[@NutsandBoltswithTone]

nice

[@trentroberdeau6399]

Tool truck brands are no better than any number of internet brands... just more expensive

[@NutsandBoltswithTone]

I appreciate your comment but I have to disagree, there is a difference between them. Now there are some good brands out there but there is a difference.

[@trentroberdeau6399]

@@NutsandBoltswithTone it used to be that way, but with brands like sunex, Capri etc. anymore. There no other reason than Convenience by going with tool brands. I know mechs working in the mines in Wyoming that say there is no difference overall other than the prices.

[@NutsandBoltswithTone]

In some tools yes. Ratchets i disagree. I have yet to hold in my hand and use a ratchet that feels better then a snap on ratchet. In the end they all get the job done. Im not arguing that one brand is better then the other. I have multiple brands and they are all good.

[@trentroberdeau6399]

@@NutsandBoltswithTone there is absolutely nothing wrong with wanting all tool truck brand tools. but at the same time trying to tell someone else that they are the best is just Dishonest. No one should be telling anyone else what to buy, bias is best kept to one’s self.

[@timothyangelosanto9668]

I had a new guy at the shop today he called to ask if he needed an impact then called back to ask if he needs sockets .....we know where this goes ...... he broke a caliper bolt and stripped a drain plug on the same car using all my tools .......... this trade is a lifestyle live by the wrench or get the fuck out its not play time..... be careful who u hire

[@NutsandBoltswithTone]

Wow that's crazy. I hate that kind of stuff.

[@MiguelMartinez-hm1hg]

A new tech (millenian ) be like how many batteries you use on those power tools and what voltage are those 18v 20v and amperage 😅😅😅😅

[@NutsandBoltswithTone]

The batteries are 14.4 volts. I have 7 batteries, I have 4 cordless ratches but only use 3 of them, 3/8 impact, 1/4 drive impact, a adjustable light and I just got an amazingly bright uv light for leak diagnosis. I am not sure what the amperages are. Thank you for the comment.

[@MiguelMartinez-hm1hg]

@@NutsandBoltswithTone I was playing a joke on your air tools 🤭 you can't deny hearing those air impact guns blasting on the shops it can make you think you're on the racing pit

[@ramsandrzr3706]

Man U call everything a ratchet you called your extensions ratchets you called the wrenches hanging on cart ratchets 🤣😂🤣 everything’s a ratchet lol

[@NutsandBoltswithTone]

That's crazy I'll have to go back and see what your talking about. The wrenches hanging on the car are ratcheting wrenches. Thanks for watching.

[@rehtrovic2769]

Monster no longer exists thanks to monster energy

[@NutsandBoltswithTone]

Oh really? I had no idea. I love both of them lol.

[@runningbear1982]

I sure hope your wife knows how to cook on the cheap. I know where all your money is going.

[@NutsandBoltswithTone]

Haha very funny, yeah I have quite a bit of tools and have for sure spent a few bucks. Thank you for watching the video.

[@pedrodavide9394]

Want to become a successful youtuber? Work on not saying um 6,000 times in 30 minutes.

[@NutsandBoltswithTone]

Ok I will keep that in mind thank you. Hope you enjoyed the video.

[@JosueGarcia-lx3ny]

Bro clean your tools

[@NutsandBoltswithTone]

I try, been a little busy lately.

[@JAI45624]

@@NutsandBoltswithTone Alot of toolbox tour they have brand new tools never been used, when your tools are dirty that means your using them

[@NutsandBoltswithTone]

@@JAI45624 thank you for that comment, yes my tools are used.