You understand how grateful us 4.7 owners are, because of the time you took and explained every important aspect, especially issues we could encounter. God has a special place for people like you. Very helpful!
@NutsandBoltswithTone7 күн бұрын
Thank you very much, that is very nice to hear. Good luck.
@maxwolthuis Жыл бұрын
Man this video made the install very simple, these little 4.7s are pretty fun to work on
@NutsandBoltswithTone Жыл бұрын
I am very happy to hear that, the repair I did is actually quite confusing when you first try to do it and understand the verbage used by Toyota. Thank you for watching.
@ttvills14 күн бұрын
Man you went to the trouble to document and explain all this amazing information, the least I can do is give you a like and subscribe!! 🎉🎉
@NutsandBoltswithTone13 күн бұрын
@ttvills Thank you very much I appreciate it.
@johncrippen991910 ай бұрын
I just watched your video and I want to tell you that I'm an instant fan no fluff no bulshit just what I needed to know in a very very well laid out way. I appreciate you
@NutsandBoltswithTone10 ай бұрын
Why thank you I am happy you found my video and it was able to help you out. Thank you for watching.
@Toolaholic72 жыл бұрын
Removing the oil and other fluids out of bolt holes always reminds lessons in science in high school.Learned fluids take the shape and do not compress.
@NutsandBoltswithTone2 жыл бұрын
Yup very true. They will crack the head for sure
@adamatmoralmotors5167 Жыл бұрын
Thank you bud. I have the service book you have on screen but there is so much more confidence when seeing it in person!
@NutsandBoltswithTone Жыл бұрын
You are very welcome, yes the service information is very hard to understand in my opinion. I am happy to help. Thank you for watching.
@adamatmoralmotors5167 Жыл бұрын
@@NutsandBoltswithTone would you suggest using any FIPG on the cam seal? or what about when installing the crank seal? i have an vvti motor. should i use any assembly lube when doing either?
@travisburk3107 Жыл бұрын
Doing the cam seal replacement with the tb/wp this weekend. 06 Lexus GX470 4.7 vvti. First timer. Wish me luck.
@NutsandBoltswithTone Жыл бұрын
Good luck with the repair. I am sure things will go smooth. Thank you for watching.
@7sunsetmaro7 Жыл бұрын
Very good video. I'm in the middle of doing mine and just the front seal cap silicon locations helped. Thanks!
@NutsandBoltswithTone Жыл бұрын
Sweet I am happy to help. Thanks for watching.
@hardknoxblount Жыл бұрын
Great detail! I really appreciate that you provided the torque specs. Thanks brother!
@NutsandBoltswithTone Жыл бұрын
You are very welcome and thanks for watching
@skhochay10 ай бұрын
love this video, very very detail info with lot of warning notes, good job !
@NutsandBoltswithTone10 ай бұрын
Thank you very much. I appreciate you watching
@billbeckett10212 жыл бұрын
Great vid! I would have left the bolt in but I would also leave a note with the key. This way the worst thing would be removing the valve cover. Another great vid from Tone!
@NutsandBoltswithTone2 жыл бұрын
Thank you Bill. I appreciate you watching.
@mygunsnstuff2 жыл бұрын
Walth of knowledge. Thank you tremendously! I’m about to tackle this job in the next week. First time I’m hearing to not seal pack the grooves-I was going to as no one in the research I have done has said that. Also, what program was that that you were using with all the info, e.g. torque specs, orientation of cam caps, where to apply seal pack, etc.? Seriously, thank you for making this video!
@NutsandBoltswithTone2 жыл бұрын
Thank you very much I appreciate that. The info is from All data. It's a program you have to subscribe to. Sealing cam caps is tricky sometimes if you do not know where to seal. If you have any questions hit me up on Instagram. Thank you for watching.
@Zulo12132 ай бұрын
Thank you so much for making this informative video
@NutsandBoltswithTone2 ай бұрын
Glad it was helpful!
@BrandonMiller-yu8bd8 ай бұрын
Thank you very much for your video. It was a tremendous help. I’m having the exact same trouble…I picked my truck up from a timing belt service with Cam seals. And now it sounds like a diesel. Can you reset the gear with the service bolt if it wasn’t done correctly? Or do I need new parts on standby?
@NutsandBoltswithTone8 ай бұрын
In this video That is what I was doing I believe. Another tech can seals and had to fix it. You just have to really think about that gear and how far it moves. We didn't replace anything except new seals. I fixed it first try. Hit me up on Instagram if u have any questions. Good luck thanks for watching
@deimosphobАй бұрын
keep in mind ALL UZ's 1uz, 2uz, 3uz are just about the same, heck I think the timing belt kit is cross compatible. The only thing is the electric fans are way easier to work with, ie you don't have to take the radiator or fan off.
@NutsandBoltswithToneАй бұрын
That is great info thank you
@jonp6347 Жыл бұрын
Thank you for the video can you make a video on valve seal with the heads on block?
@NutsandBoltswithTone Жыл бұрын
You are very welcome. I actually would not replace valve seals without removing heads, and we always send them to the machine shop to be checked. We have such a long warranty that we do not take chances on that. Thank you for watching.
@christianmonte262 Жыл бұрын
This was a good video and in English too 😊
@NutsandBoltswithTone Жыл бұрын
Thank you I appreciate it. Happy to help and thanks for watching
@WEESHBONE11 ай бұрын
Very good tutorial!👍
@NutsandBoltswithTone11 ай бұрын
Thank you very much and I appreciate you watching.
@bernardowebb22854 ай бұрын
I had my timing belt done and cam seals also but I feel the bolt in the camseal on the cam cover
@NutsandBoltswithTone3 ай бұрын
I am not sure what you are saying
@LesWiles4 ай бұрын
What to look for in that valve cover little filter? Is it typically just cleaning from being to dirty? Do you know the part number if it needs to be completely replaced?
@NutsandBoltswithTone4 ай бұрын
Not usually dirty u just want to check it. I don't know part number.
@JeremiahOhana Жыл бұрын
Having an issue with the left bank. Manual says to line up the 2dots (4dots total) on cam gear. After doing that the cam/timing sprocket is 180 off. What am I doing wrong?
@NutsandBoltswithTone Жыл бұрын
Sorry your having trouble, if you message me on my Instagram the vehicle info I can help u. Thanks for watching
@BlueShirt61 Жыл бұрын
I’m having the Same issue on my 2005 4Runner. We’re you able to find the solution?
@lynnolney97279 ай бұрын
what was the end result i have the same problem
@kylec247610 ай бұрын
thank you so much
@NutsandBoltswithTone10 ай бұрын
You are very welcome. Thank you for watching
@jmohn65 ай бұрын
So Ihave question a question on the dots if driver side cam is set to dot one and passenger side is set to the two dots will that be fine or screw up the timing
@NutsandBoltswithTone4 ай бұрын
Message me on Instagram
@dillonleone8840 Жыл бұрын
Great video and some good tips! Just a quick question did you set the cams to the T's or did you just set to TDC? I know on the 4.7s they have a tendancy to jump time if you arent careful. Thanks!
@NutsandBoltswithTone Жыл бұрын
To be honest I am not sure if it was TDC or not, I just followed the service information and do it exactly how it says. Thank you for watching I appreciate it.
@JoyLong Жыл бұрын
I was hoping to see a full vid of timing and cam seal
@NutsandBoltswithTone Жыл бұрын
Sorry man I tried to cover all the important info. If I get another one I'll try to do more. Thanks for watching
@Davidbuella1209 Жыл бұрын
Nice sir Thankyou
@NutsandBoltswithTone Жыл бұрын
You are welcome thanks for watching
@aarondavis1224 Жыл бұрын
What to do if you removed a camshaft before putting the service bolt in?
@NutsandBoltswithTone Жыл бұрын
You have to rotate cam back into correct position. Thanks for watching
@alessandrodelpierro55862 ай бұрын
How long does a job like this usually takes? On that 4.7 engine specifically.? Anyone have an idea?
@NutsandBoltswithTone2 ай бұрын
I am not sure how long this takes to be honest.
@manuelsmata228613 күн бұрын
Cuestión after I did the cam seal and putting back together the engine sounds like diésel 😮
@NutsandBoltswithTone13 күн бұрын
@manuelsmata2286 last time I saw that happen it was because someone did not put the locking bolt in cam before removing sprocket. Message me on Instagram
@MKIIIsupra2jz4 ай бұрын
Why is everyone disassembling the intake cam to change the seal? I took that gear off with the 4 Allen head from the rear and changed the seal that way
@NutsandBoltswithTone4 ай бұрын
Oh ok
@MKIIIsupra2jz4 ай бұрын
@@NutsandBoltswithTone it seems like the gear won’t go passed the 3 fingers in the middle of the cam but if you wiggle it the right way it comes right off - saves a lot of time if you do it again
@reggiegoggins7 ай бұрын
Was the noise only when accelerating?
@NutsandBoltswithTone7 ай бұрын
I cannot recall in sorry. Thanks for watching
@reggiegoggins7 ай бұрын
@@NutsandBoltswithTone I’m surprised you replied I’m definitely subscribing
@NutsandBoltswithTone7 ай бұрын
@@reggiegoggins thank you. I am here to help. Message me on Instagram if you need any help. Thanks again
@hasanalzaabi2 жыл бұрын
Is this process same on the lexus ls430 2004?
@NutsandBoltswithTone2 жыл бұрын
I am not sure but if you message me on Instagram I can try to help you. Thank you for watching
@hasanalzaabi2 жыл бұрын
@@NutsandBoltswithTone thnx for replying, Wots ur insta address?