NUX MG-300 - How good is it?

In this video I walk you through the NUX MG-300. I go through what I like and dislike. I also show you how I like to use it in a live praise and worship setting.
Signal flow: Nash T-63 telecaster (lollar pickups) - NUX MG-300 - Interface - LOGIC PRO X.
Download this patch pack: www.buymeacoffee.com/tycaskey...
For live use, I use a stereo to two mono cable and run out of the headphone jack of the mg300. That way you can keep all the stereo imaging.
Thanks for watching!
NUX MG-300: amzn.to/3gEbhTC
HX STOMP Patches:
AC30 Worship Patch w/ IR:
www.buymeacoffee.com/tycaskey...
Prince Reverb w/ IR:
www.buymeacoffee.com/tycaskey...
IR's used in previous patches:
www.davidhislop.co/product-pa...
Want to help support this channel? Please consider buying me a coffee. Thank you!
www.buymeacoffee.com/tycaskey...
Follow Ty Caskey:
Instagram: / tycaskeymus. .
Facebook: / ty.caskey.7
Listen to Ty Caskey: open.spotify.com/artist/6pxJQ...
HX Stomp:
amzn.to/38Owatc
Pedals:
Pedal Board: amzn.to/3lxMzG5
Case: amzn.to/2K7rO6p
Power Supply: amzn.to/36AAh9z
Dunlop Volume: amzn.to/2IDsWyf
Morning Glory: amzn.to/3nlgPEI
Archer: amzn.to/32IqFbQ
Octave: amzn.to/32JtWYr
Foot Switch: amzn.to/3lxncnJ
Wireless: amzn.to/35wFXlX
Headphones:
Mixing: amzn.to/3eWzbJ4
Live: amzn.to/3nmULJN
Accessories:
Picks: amzn.to/2ICrz2e
Capo: amzn.to/3nmUUNl
Capo: amzn.to/3nll4QE
Strings:
Acoustic Strings: amzn.to/2UqbRtN
Electric Strings: amzn.to/3lxnHhB
Audio Recording:
Mic: amzn.to/3eY0pPs
Interface: amzn.to/3nkM1E0
Interface: amzn.to/35vyRho
Monitors: amzn.to/38GkQ2o
Monitors: amzn.to/38DtaQx
Camera:
Main Camera: amzn.to/35si52A
B Camera: amzn.to/3luEke5
Lenses:
E-Mount: amzn.to/3nkc26v
E-Mount: amzn.to/2GZcyXW
Micro4/3: amzn.to/2IFGRmT

[@tycaskey]

Hey everyone! As promised, here is a link for you to download my patches: www.buymeacoffee.com/tycaskeymusic/e/14069 Enjoy! 😀🎸🙌

[@nickojohnodtujan2795]

Thanks Ptr.! Bought my MG300 just a while ago, will serve as my grab 'n go pedal.

[@nickojohnodtujan2795]

I uploaded your patches just a few minutes ago and I was completely blown away especially with the pads. Should cover 90% of my worship sound needs. Thanks again! 😊

[@abrahampurba5251]

Hx stomp and nux mg300 which better??

[@nickojohnodtujan2795]

@@abrahampurba5251 depends on your needs. HX stomp gives you a variety of tones, chain route options, and a lot more flexibility. While NUX gives you the best and realistic tones without having to spend a diamond. I gave up the former as I found it to be too broad for my needs and went with the latter. Not to mention, it's got an expression pedal to give me the swells that I need.

[@jcstories7103]

is this free?

[@firdeye2681]

this pedal is mindblowing. Ty for the video. the tones sound pleasing to my ears. Good playing

[@tycaskey]

Thanks!

[@tarheeltone]

Hey Ty, wanted to let you know that I played at a new Church plant here in NC and I used your patches again going into a Blues Jr and they sounded fantastic. I’ve been playing for 40+ years and it blows me away at how good your lead patch sounds, even being an AC30 model... Thanks again 🙏

[@tycaskey]

Thank you so much! I’m really glad they’re working out for you!

[@windelravina9773]

I love the ambient sound this is what i looking for worship great pastor

[@tycaskey]

Thank you! I just posted a link for download. Enjoy!

[@chikayoshida]

thank you for the patch !Blessings!

[@JCILORD]

Thanks for those patches. It worked on my Squire guitar also. Love the swell patch especially.

[@Heavenreck]

Great Video very detailed. I was considering this since I have a NUX mighty plug and I love it.

[@JayTheLane]

Fantastic tones and heartfelt playing.

[@tycaskey]

Thank you!

[@randymarsiano7191]

Thank you Pasteur. God bless you.

[@markstephen7397]

Finally! Found a worship tone! Hey Ty! Hope you are doing well. Love your tone! Planning to buy one. God bless sir!

[@tycaskey]

Thanks so much! I will look into how to make it available. God bless!

[@markstephen7397]

@@tycaskey thank you sir! This helps me a lot! ♥️☝️

[@D-8-Tone2]

Great patches! Good review! Thx

[@tycaskey]

Glad you like them!

[@nedstar7378]

Nice video and great information thanks for sharing

[@georgemavimbela]

I'm buying one today... Thank u very much

[@tarheeltone]

Used your patches at Church yesterday for the first time 👍👍 Thanks again Ty !!! Although, I was running through the Church’s Kemper on a clean patch w/no IR.

[@tycaskey]

That’s awesome! I’m glad it helped out. Thanks!

[@ukulelesemmisterios]

Thanks for this great review buddie!

[@tycaskey]

For sure!

[@DavidOnTheRoadGuitars]

First time I've heard it this way. Very nice.👍

[@tycaskey]

Thank you!

[@DavidOnTheRoadGuitars]

I just bought one of these nux mg 300. I think it will be totally worth it. Amazing sounds for a great price

[@tarheeltone]

This is the best demo of P & W music that I’ve seen with the MG-300!

[@tycaskey]

Thank you!

[@tarheeltone]

However, I am having trouble transferring the file

[@tarheeltone]

@@tycaskey I figured it out! The Sound great! Question: If the MG-300 has amp/cabinet models, why do I need IR’s?

[@tycaskey]

@@tarheeltone Awesome! You definitely do not need IR’s; however, sometimes you may prefer the sound of an IR that is built for a specific amp model. That said, just go for whatever sounds best. Thanks for the question👍.

[@tycaskey]

@@tarheeltone Have you updated you MG-300 with the latest firmware?

[@alainvb8786]

Super video MrTy .j ai telechargé vos presets . thank you de France

[@tycaskey]

Thank you!

[@stephenwhitney5576]

Nux did a really good job on this!! I would love to see a updated version of this at some point. This pedal is not to far off of what my line 6 pod go can do. Great time to be a guitar player for sure.

[@tycaskey]

Agreed! It’s an impressive unit for sure. Thanks for the feedback!

[@stephenwhitney5576]

@@tycaskey hey would you ever do a review on a pod go by chance and than compare that vs the nux?

[@tycaskey]

@@stephenwhitney5576 Definitely! If I can get my hands on one I will for sure.

[@stephenwhitney5576]

@@tycaskey hey i sent you a message on facebook! :)

[@formercakid]

MG30 is on it's way........

[@rommelsessionslive648]

Nice sound the guitar is awesome. Love it! It's amazing.

[@tycaskey]

Thank you!

[@rommelsessionslive648]

@@tycaskey By the way I'm a talent scout at Sessions and love what you're doing. Would love to get you in front of our global audience of music fans. Are you interested? Our team sent you an email for more details. Let me know if you got it.

[@tycaskey]

@@rommelsessionslive648 Thanks! I’ll check it out.

[@yenggtrst2559]

you deserve more subscribers

[@slawsonscot]

My mg300 arrived today, in part because of watching your videos. I’m a Pastor based in Scotland and was keen to revisit multi effects units now that the quality is reaching the budget price point. I switched over to a Katana and pedals a few years back, but was keen to see how far these have come since my ME-70 days. Looking forward to using it in church over the coming weeks. Thanks for the excellent video!

[@tycaskey]

That’s awesome! Happy to help. Check out the link in the description for some free patches to help get you started. Let me know if you ever have any questions. God bless!

[@nickcastor1583]

Im a beginner. Can i get all these effects when i plug it in my 10W amplifier or do i need a computer for this? Sorry for the stupid question.

[@slawsonscot]

@@nickcastor1583 all you need to do is plug your guitar into an effects unit (like this one, the NUX mg300), and then you can either plug headphones into it or you could plug it into your 10w amp. Your amp might have some effects built in - probably have reverb, which is like an ambient effect that makes the guitar sound like you're in a large room. Other basic effects like delay (repeats the notes you play), chorus (makes it sound like you've got two guitars playing the same part), or flanger (like a swirling effect) can all add something and help the creativity. Your amp might also have a distortion channel or dial, which makes the sound overdriven. Loads of options, limitless really, especially when you use a multi effects unit.

[@nickcastor1583]

@@slawsonscot thank you so much for the explanation. I have a blackstar debut 10e. I'm planning to get the nux mg300 for it. But since i didn't know if nux mg300 can be plugged straight into the amp, i was confused. Thank you for your guidance. ✨

[@slawsonscot]

@@nickcastor1583 it's a great little unit and I had one for a few months - only reason I sold it on was because it didn't take acoustic guitars all that well but it sounded great with my electrics. the computer software is excellent and really user friendly if you want to dig a little deeper with it, but you can plug it in and use the on-screen menus easy enough and you'll be able to get some great tones from it. all I would advise is less is always more with these things, so start off really minimal with the number of effects and keep the settings quite low, because too much reverb/delay/chorus can swamp the sound. all the best for the adventure though - I'm sure you'll enjoy it!

[@jazzydog]

Great demo!!.

[@tycaskey]

Thank you!

[@bopaurelio3947]

Great review...👍👍👍

[@tycaskey]

Thank you!

[@Dobroz99]

Hey thanks for such a great review, I under stood it! I play in a worship band, bass, upright bass and acoustic guitar. Have you done any videos on this for bass or acoustic guitar. Also I am interested in knowing more about the IR features. There are a lot of IR’s for bass and acoustic guitar. Thanks so much for your review.

[@minkorrh]

I wanted a little mobile kit to drag around so i bought a pair of Samson BT3's, and one of these MG300's. I'm literally blown away by the thump of the ALDamageRect setting after I tweaked the reverb and delay setting. Like holy crap. Has some real chunk and thump even through small Samson BT3 FRFR speakers. I'm waiting on a cable to see how it sounds through cranked B3031A's. I'm on Win10 and had to use the software from a higher model to enable a connection, but after that it worked fine even though it throws a software warning on every computer start. Just dismiss it and you're fine. Sounds effing great for the $$ The rectifier sounds better than my PODHD500X, but as I said, I need to test through better monitors to be sure.

[@Ngimming]

Beautiful sound lolar pickups

[@peteytwofinger]

hey thanks for the patches pal ! you did a good job with the video and you play very well . i have a zoom g3 and i upgraded to this mg300 and i am happy with its sound quality but its limited , like the compressor is a joke ... and dummy buttons on is it just one model ? wth ? lol ... yes the editing software is clunky i found if i moved the unit it disconects , the usb connector isnt the best - they should have used a larger usb mini b or what ever it is . but for the money it sounds really good . i miss the zoom spring reverb though man it sounds so good but the amp models really have definition and character . i found experimenting with custom ir to really bring it to life .

[@tycaskey]

Thank you! Happy to help.

[@mortenkalland]

Thanks, and Jesus bless you 2.

[@Worlds_Worst_Guitarist]

Great Pedal!

[@tycaskey]

Thanks!

[@diecinuevemx]

Hey Ty! Great video as always! You always find a way to get a great tone. Are you planning on making more reviews on these new amp modeling units? I would love to see you making a review on the Mooer GE250 (which is on it's way to me, hehe). Cheers!

[@tycaskey]

Oh nice! I don't own that unit, but if I can get a hold of one, I'll definitely do a review on it. Mooer makes some good stuff.

[@diecinuevemx]

@@tycaskey They do! Actually I started gaining more interest in mooer products after I watched your video of the mooer preamp live. I live in Hanoi, Vietnam and it's quite difficult to find line 6 products like the HX stomp and if you do it's very expensive but mooer is pretty common here so you can easily have access to their products. I chose the GE250 cause is the one that's closer in specs to the HX stomp plus effects like delay, reverb and modulation in the unit sound great.

[@tycaskey]

@@diecinuevemx That’s awesome! I’m sure sure you’ll be happy with it. I really liked the preamp live, so assume the GE250 will be a step ahead. Hopefully I can come across one soon and do a review. Thanks for the feedback!

[@diecinuevemx]

@@tycaskey It'll be great if you do! Thank you for your response!

[@diecinuevemx]

@@tycaskey Hi Ty! Just ran into your demo again and wanted to share with you that I ended up getting the mooer ge250. I added it to my pedalboard and have to say that it sounds just amazing. Here's a picture of my board instagram.com/p/COCwwAtAT9u/? I'm very happy with it. Also, if you want to know how does it sounds, I recently put out a 4 songs EP that you can find in my YT channel or on bandcamp diecinuevemx.bandcamp.com/album/this-city-lies-ep if you have a chance to listen it I will appreciate some feedback. Cheers!

[@danield888]

Great review! I play guitar in my church and have been thinking about going the multifx route. Currently I just use amp and pedals, but I don't need anything crazy lol. Can this unit be run directly into the venues p.a. system or does it have to be put in front of an amp or used in a recording application. Thanks again and God bless!

[@tycaskey]

Hey! Yeah it’s designed to run direct. It has a 1/4” out, or you can run stereo out of the headphone out with a 1/8” male trs to two 1/4” adapter.

[@BobF67]

Great demo, thank you Sir! question if i may, on a budget and starting from scratch I'm wanting to record at home, I will be buying this Nux along with presonus studio monitors......should the monitors go into the Nux or into my pc, is one way better than the other? thank you

[@tycaskey]

Hey! If you plan to record, go into the computer. If you just want to practice, you can use a stereo to two mono cable and use the headphone jack from the mg300. For recording, plug the speakers into the computer and hook the mg300 up via usb cable. Open your DAW and select the mg300 as your input and your computer as the output. It also might be worth investing in an affordable audio interface. It will allow you to do more when it comes to recording. Hope that helps!

[@pierrenjolomba922]

Hi Pastor Ty, I Love these tones ❤. I have an mg400 though, any way i can use these on it ? Thanks 😅

[@GlenReed]

Great review!

[@tycaskey]

Thank you!

[@ShevachAcoustic]

I love the Intro bro...

[@tycaskey]

Thank you!

[@tjborekvideo]

Very good demo. Thanks for putting it together. Is there much lag when you change presets with the two footswitches? Can you set a master level for each preset, or is that done with the amp being modeled in each preset?

[@tycaskey]

Thanks! Slight lag. Volume set within the amp and master volume on the hardware of the unit. For the price, it’s pretty powerful.

[@felixkim567]

Hi, can you make a tutorial of how you made that ambient tone in the beginning? I would like to try it for our worship service. Great sounds by the way.

[@tycaskey]

Thanks! There’s a link pinned in the comments where you can go download all the patches I made.

[@felixkim567]

@@tycaskey Thanks :)

[@josueparada9353]

Thank you for sharing! My MacBook Pro is not recognizing the pedal. What type of Micro USB do I need to get for my pedal? I will really appreciate links. Thank you!

[@RobertFreitag]

Would send a mono or stereo signal to the sound desk? If a mono send, or if the PA is only setup for mono would that have any issues with the detune pedal since it seems the point of it is to vary the L&R channels... I like the sound, just wondering if you think there is an issue with mono. Cheers.

[@gldkrn]

can I change switch on/off individual effects of a patch with foot switches live ??

[@hanovergreen4091]

That's what you play during Church? wow. I downloaded the link but do'n't have an MG-30 or -300. IF I buy one and use it, I will come back and give you what I usually pay at ChopTones. My word. Best Regards!

[@tycaskey]

Thanks so much!

[@johnmcminn8288]

Hi Ty, I have an Interest in the Nux Mg300 as an Interface, and for backing tracks, can the 300 store backing tracks with the Manager software like the Nux JTC looper does, where you can take a 24 bit Wav file and convert it to a Nux file then save it in the pedal ?

[@tycaskey]

Hey! I am not sure on this one. I did not see anything like that in the software, but it’s worth asking NUX to confirm. Sorry I can’t be more help.

[@danhodson8242]

Great demo, man!! How'd you like it for volume swells? Heard those in the beginning - but was that hard to set up? Did the exp/vol feel smooth?

[@tycaskey]

Thanks! It feels good actually. I have all the patches available for a free download.

[@htawhtaw8182]

Very good

[@jeffblahblah5226]

If it played through my PC it would be good but mine like many others wont. Save for the mg30 and hope like hell they have sorted their shit out

[@olanpardede]

How to make the sounds like you playing at -22:35 till -22:13? Can you plase share the preset on googledrive?

[@musik4life24]

Hello nice Videos i subd;). Torn between 2 multieffect units One Question: What about nux mg300 compare to the boss gt1??? Tone wise and quality of the effects? A good Rectifier would be nice!

[@tycaskey]

Hey! That’s a really tough choice. I’ve not messed with the GT1, but I have played the GT1000, which is supposedly the same sound engine. I was very impressed with the sound quality. The MG300 is impressive for its size and price. Both sound good. It just comes down to what features are more important to you. Thanks for subscribing!

[@abrahampurba5251]

Great pedal, i have a question pastor, how to stack with other pedal, let say like a modulation and reverb..?

[@tycaskey]

Thanks! I would run all modulation and reverb/delay pedals after the unit. If it’s a mono pedal, just come out of the mg300 output into the pedal and so on. If you want to use stereo effects, use a stereo to two mono cable and go out of the headphone jack of the mg300 into the stereo pedal. Additionally, I’d run drives, boost, comps, etc before the unit. Hope that helps!

[@jono5900]

Great video Ty..So, I was wondering, say you were using your chorus sounding preset and you'd like to call up your Solo preset for a quick solo break and back to the main chorus preset, can you accomplish that easily via the foot switches?

[@tycaskey]

Thanks! You just just need to press the foot switch however many times to the next preset. For example, if you’re on preset 2 and you want to jump to preset 5 real fast, you would need to hit the bank up three times. You would then need to quickly hit the bank down three more times to get back to preset 2. Not ideal, but hard to complain at the price point. Hope that helps!

[@jono5900]

@@tycaskey thanks man..

[@musiclessonsbynxd]

Great video ! Any suggestions for alternatives to this that sound better? Hopefully something that allows you to select multiple tones without having to press up/down multiple times?

[@tycaskey]

Thanks! Hx stomp

[@musiclessonsbynxd]

@@tycaskey thank you, I believe that would be 5 times the cost of this unit !

[@snicklefritzthetab8411]

Awesome

[@jonathanmuwanguzi6964]

what software do i download to efficiently use with this nux mg 300

[@hexaldecima6839]

Can I connect this to my PC and actually listen to what it sounds without having an amplifier or a recording software like logic pro?

[@CamJMitchell]

Amazing Demo Ty ... Is the very start from a specific song?

[@tycaskey]

Thank you. No just made it up .

[@4frankp]

Loved the video! Do you think that the mg 300 sounds could hang at all with the line6 helix stomp? I had to sell mine because of finances. Thanks and God bless

[@tycaskey]

I mean it really comes down to preference. For overall sound and feel, I probably prefer the stomp. You really need to use IR’s imo though.

[@4frankp]

Thanks Ty

[@evansaddai1379]

Great review…just got one. What preset were you using for the first swell effect please?

[@tycaskey]

All presets are free to download

[@paulneedham9885]

Hello. Has anyone used this with a Windows 7 computer? I have tried different USB cables and It see the USB cable but does not connect to my computer? I dont know if the cables are for charging only or can transmit data. My phone is now USB C so I cannot use that to test them. Any info would be appreciated. Thanks.

[@jeffu190]

Hi, great video! I don't have an amp ( can not afford it lol) Can I use Nux mg300 as a soundcard then have output as headphones or speakers to listen to the guitar sound? If it works, does it sound good compared to having amp as output?

[@tycaskey]

Hey! Yes definitely. This unit is designed for direct recording/monitoring. You will get a better direct tone than using just the headphone out of an amp.

[@tiago5a]

Please share the patch of the intro. Great review, by the way. Thanks

[@tycaskey]

Thanks! I will for sure!

[@ferramirez4570]

What do you think about mixing this unit with some pedals? A pair of overdrives, reverb, delay and compressor?

[@tycaskey]

Could be cool. I’d run the delay and reverb after the unit and the drives and comp before.

[@robertorigo6188]

Muito bom!!!

[@drummerbogz2248]

Hello sir, how to open your patches files? every time i unzip it, it always lead me to google chrome and instantly download it. I hope you can help me thanks

[@tycaskey]

Sorry. I'm not sure why it's doing that. Is there a specific patch you're looking for?

[@accentontheoff]

What do you think of the Boss GT1, especially the amps and cabs. Sorry if that’s a little off topic but that’s my current choice, the one against which I am evaluating options. Thanks.

[@tycaskey]

I haven’t had much experience with the GT1 apart from a couple plays at the guitar center. Boss might have a little more stability on the software, but the NUX has a lot of value for the price.

[@accentontheoff]

@@tycaskey Sure, thanks for the reply.

[@schrodinger6393]

The Intro ambient chords sound like Half Light - Porcupine Tree

[@adinaomi]

Hi! I have encountered some trouble with quicktone. I can actually proceed to the GUI of it but there is no sound when i pluck or strum my guitar. My guitar is plugged by the way. I am using windows 10. Checked the device manager in sound section and saw Nux Mg300 Audio saying "Device Cannot Start (Code 10 Error)" with a triangle exclamation point icon on it. How should i fix it? By the way, my only need is to bring the sound of my guitar whenever i use quicktone. Big thanks!

[@tycaskey]

Hey! Make sure you have the latest version of Quick Tone software. Also make sure to select the mg300 as your input for the audio device. The output should be whatever your speakers are connected to.

[@adinaomi]

@@tycaskey thankyou brother. By the way, what is the latest version of it?

[@tycaskey]

@@adinaomi For sure! Here’s a link to the latest firmware: www.nuxefx.com/mg-300.html

[@krzysztofgaweda4840]

@@adinaomi Hi ! what is the latest version of the system at the moment? Thanks

[@Xianpaul0523]

Can the usb port be used to connect it directly on pc for recording? Even without an interface? Edit: 5:11 ohhh thats the answer. Thanks 😊

[@jacobcastro1885]

That's a no, correct?

[@bagaswahyuillahi6009]

@@jacobcastro1885 Its a yes No need second Audio Interface

[@NayarJoolfoo]

Can it be powered by USB cable?

[@63nob]

素晴らしいレビューです。

[@icefrost6169]

will the patches work on an MG30?

[@ch9wa]

Can i use it as an audio interface and like skip the effects on it and use my vst?

[@tycaskey]

Yes it works as an audio interface. And yes you can bypass effects.

[@FERNANDO-jj2vt]

@@tycaskey will you please explain how it is done???

[@tycaskey]

@@FERNANDO-jj2vt maybe I’m not fully understanding your question? Plug the unit in via usb. Select the unit as “audio in” under preferences. If you select it as your “output” too, you’ll need to connect speakers or headphones. Once setup, just bypass whatever effects you want in the editing software.

[@ashantamang739]

hey please can you tell me the differentces between nux mg 300 and nux mg 20 which is better?🤔

[@tycaskey]

Hey! In think the mg300 is newer, but not entirely sure on the differences apart from size and look. Have you looked on their website? From my understanding, both units have the same molding technology.

[@giuvs]

Hi, this have a fuzz face pedal effect or other fuzz?

[@tomcaron9113]

I wish there was a good acoustic emulation. It’s the only sound missing from the pedal. Maybe also a bass emulator. Looks like the new NUX 30 will have that covered. I agree on the PC software and connection issues. Win10 is iffy when loading new patches. Can get one to two in before it freezes when locating the patch in Explorer. Otherwise the software works well when building and altering patches. Will play with it at home before replacing my pedalboard at church. Biggest concern with these units is pressing the wrong patch with a higher gain or volume setting. Ouch. First task was to balance out each patch with a sound level DB meter to my Deluxe Reverb. The problem I encountered was that the factory patch just before the first user patch cannot be saved once you lower the volume. Again, ouch. Too loud and unavoidable. So all my gigging user patches start at 2A not 1A. Wonder if all these units are the same?

[@tycaskey]

I haven’t really experienced level issues, but I tend to build the patches with slight level adjustments based on the sound I’m going for. Thanks for the feedback!

[@ShaWar102]

I saw that the latest software update has acoustic sounds.

[@soundsgenuine3855]

Hey Ty, I tried Boss Me25, Gt1...MG300 sounds not bad actually. The only thing i want to ask, can this MG300 use in live performance ( mini hall/ small bar ). Your video is very clear and easy to understand makes me want to get it today. May God bless us all. Cheers!!

[@tycaskey]

Hey! You can use it live, but it’s pretty limited. You will not be able to turn on/off effects with a foot switch. You can only do patch changes like I show in the video. Hope that helps!

[@anonimogtr49]

@@tycaskey And if i use this pedal connected to a computer in a live situation?

[@tycaskey]

@@anonimogtr49 I would not recommend that

[@Luixian]

how to choose mg300 and boss gt1? Is it difficult to use mg300 without a computer?

[@tycaskey]

No you can still edit with just the unit

[@farkasszabo7505]

Hi! I bought my device 2 days ago. Does anyone else has a problem with using the device with headphones? It seems like the default sound is too quiet compared to the effects' additional sounds. Pretty much its unplayable for me through my headphones (ath m50x). Even some of the default patches do not work correctly. It sounds great with an amp though. Did anyone else have this issue?

[@tycaskey]

I’ve not experienced this. Maybe use a headphone amp to boost the signal?

[@pacolocco3412]

New subscriber Here! Btw I’m using my nux mg300 with zoom MsCDR70 in our church 😁 Godbless!☝🏻

[@tycaskey]

Thanks so much!! Sounds like a great setup. God bless.

[@Lovestronaut]

youre running the Zoom after the mg 300?

[@pacolocco3412]

@@Lovestronaut yes

[@amateurguitarist0]

Bro I can't open your file, in my smartphone it says that "file is not supported"

[@tarheeltone]

What type of cable do you use going out of the headphone jack into the PA?

[@tycaskey]

Stereo 1/4” to two mono 1/4”

[@man_du]

MG300, Worship setting video plz

[@Pabs993]

I got it but for some reason I have this ear-piercing trebly, thin sound that makes it almost unplayable no matter how much EQ I do. I do have the nux mighty plug and it sounds much better, so I don't think it's the guitar... any idea what it could be? I just connect it to the PC with the USB, have the asio driver, firmware update, good headphones, etc.

[@tycaskey]

Hmm. My first reaction was something with the pickups, but if it’s not doing it with the software then that’s out. There’s a global eq that you can adjust as well. I’d look at that and make sure it’s not doing anything it shouldn’t. Also, make sure you have a good cable with all good connections. Finally, check the eq of whatever you’re running into (speakers, interface, etc.).

[@georgesondakh200]

Hello Pastor.. Is it possible to run a stereo mode in a live situation? Great demo anyway!!!!

[@tycaskey]

Yes definitely! Just use a stereo to two mono cable and come out of the headphone jack into two channels on the board. Hope that helps!

[@Eric-dd8bk]

He's a pastor?

[@MarkKorchik]

Hi. I have some problem with that. I just download quicktone and now connecting with USB as it should be. But all the time here I see "please connect the modeler with USB" What should I do?

[@tycaskey]

Try to restart your computer and try it again

[@MarkKorchik]

@@tycaskeyshould I also download a firmware and update the the mg-300 before trying again?

[@OnlyElshafto]

at 1.08 it would have been so nice if the overdrive had sustained after you switched to clean, but great idea and playing

[@tycaskey]

Thanks for feedback!

[@Funkfreed]

what do you think about valeton gp 100 it has a stomp mode

[@tycaskey]

I haven’t played it, so can’t really speak into it.

[@bagasadinurcholish3854]

Nice video and tone man In this video you use nux mg 300 to audio interface or used mg 300 as audio interface?

[@tycaskey]

Thanks! I actually did both. For the intro play through, I came out of the headphone jack into the interface. For the screen shot, I had it interfaced in via usb. I find that it’s a bit more stable running out of the headphone jack,.

[@bagasadinurcholish3854]

@@tycaskey so in your opinion the best audio quality is output mg300 to audio interface?

[@tycaskey]

@@bagasadinurcholish3854 I did not notice a difference in tone between to the two. That said, you’ll have to use the headphone jack with a stereo splitter cable to run stereo if you’re not interfacing in.

[@dunialuar92]

Nice

[@kevinmusso2397]

Ty.. we are hearing this direct, or through an amp?

[@tycaskey]

Hey Kevin! This is direct into the interface.

[@Zwilsonguitarist]

Hey bro is there something on the hx stomp that’s like the detune pedal to add more width to my tone?

[@tycaskey]

Hey! There are several ways to do it. A solid go-to is the "dimension" effect under modulation in the legacy folder. I use this effect a lot for this very thing and it sounds great. You can also use the "double take" under modulation to achieve similar results. Finally, you can use "simple pitch" to adjust the pitch and add width. Hopefully one of those works out for you!

[@Zwilsonguitarist]

@@tycaskey cool, thanks for the info!

[@Zwilsonguitarist]

@@tycaskey hey bro, I wanted to let you know since I got the new stomp update I’m using the dimension as one of the new blocks and it sounds great! Thanks for the advice!

[@tycaskey]

@@Zwilsonguitarist That's awesome! Happy to help!

[@ilovemurder8983]

Is there any latency when you change patches? Can you stack two or more effects in one patch? Can it be controlled by a midi controller?

[@tycaskey]

No seamless patch changing and no midi. Very basic operation, but very affordable in comparison to other alternatives.

[@yugi760804]

This video is great Do you have MG-30？ Hope you can make a film about MG-30

[@tycaskey]

Thanks! I do not. I hear good things though.

[@sneadmc]

Excellent demonstration… I have a newbie question… I’m going to run this directly into my fender super champ X2… So can you still use the cab feature ?

[@tycaskey]

Hey! Yeah you can keep it on, but I’d experiment with not using it as well, sense you’ll already be running it into an amp with a cab. The ir is more geared towards going direct. Thanks!

[@Eric-dd8bk]

As he answered. You can if you want to and if it's the only monitoring solution you have. But a modeler is modeling the full signal chain including an amp, a cab, and a microphone. So it's an all in one solution. It's not made to transform your fender amp into say a Marshall JCM 800 or something unlike many people think. I think you could just turn off all amp and cab modeling off and just use it like a traditional pedal board going into your tube amp though, though I'm not sure whether the MG300 is capable of it. It should be.

[@themanwhosoldtheworld8683]

if i connect this to an active speaker would it sound good??

[@tycaskey]

For sure!

[@TheSideProject]

i just have it and i like it! nice analog sound emulation! sadly... mine explodes on a sudden WOOOSSSHHHHH it's just too loud it could affect my hearing and that really sucks... such a boomer...

[@toiengskhemwanswett9325]

What is better mg300 or 30

[@EnZo-yi2ll]

Hello! Is there a difference when recording using an interface and the NUX's interface?

[@tycaskey]

No other than the fact of going into another interface is more reliable in my experience.

[@EnZo-yi2ll]

@@tycaskey What I meant was the sound difference. Sorry, wasnt able to add the word sound in my question. 😁

[@tycaskey]

@@EnZo-yi2ll Oh gotcha. Sound is the same.

[@EnZo-yi2ll]

@@tycaskey Thanks so much man! 😁

[@tycaskey]

@@EnZo-yi2ll happy to help

[@nathanelder5285]

I think the UI might have sold me on this. It’s Mac compatible, right?

[@tycaskey]

Yeah it is! It’s a really cool unit!

[@SlightlyTechnical]

i just got my mg 300 , the main thing i see is it seems to excel with Marshall type tones , but isnt so good for fender or american tones.

[@tycaskey]

Thanks for feedback!

[@NORBERTDrago]

Can someon give me patch of first tune

[@stevenslater4395]

Can you run this into a laptop without an interface?

[@tycaskey]

Yes via usb