NUX MG-30 Tutorial EP1 | Global Setting

[@qwerty6789x]

as a beginner this just save me money on buying multiple analog effects. i'm so happy ang grabbed NUX MG-30 today.

[@michaelk5507]

I think your strategy of producing really good, innovative products, well-made, and a extremely competative prices, really is a recipe for success in the marketplace.

[@nuxaudio]

Thank you

[@liamartinproductions]

I've played guitar for 27 years and this is my favorite pedal

[@seba.makron]

NEW Firmware and SCENES!! Another nice idea (to future firmwares) external footswitch A/B can be change presets, and the other 3 footswitches in the board can be scene1 scene2 or scene3 respectively AND maybe activate EXP another SCENE 4 :P is a dream. PLEASE!

[@ziozanna]

Great product, I own it and I am 99% satified but there is some big (minor) missing. My improvement request is to assign the functions I like to every pedals ie SCENE to NMP-2 footswitch or SCENE 1 -2 -3 to the three footsitch on pedalboard and looper on NMP2. Other request is to dasy-chain the NMP-2 in order to have more switch. In a studio environment the MG30 normally lies on desk and the pedals on the floor. Many thanks in advance

[@serresTV]

Hello! Can the MG 30 synchronize (Tap tempo) all the effects at the same time. For example flanger, delay and tremolo? Thanks

[@metalrap9567]

this pedal is neat af. Hours passing like minutes

[@gggg-kl2wp]

Is it suitable for classical guitar or flamenco guitar?

[@vimalkumarsukumarannair9404]

Can u suggest this for wind instrument? Is it ok for flute

[@Andy1x]

Hello Jimmy. What is the difference between front combo and rear combo in the output mode?

[@nuxaudio]

Front combo is for plugging the mg30 into the front input of your amp. Combo rear is for plugging the mg30 into the FX return on the back of your amp

[@Andy1x]

@@nuxaudio Thanks so much. So both seem to apply since I’m using the 4 cable method. I’m using the “input” on the front of the amp, and also have connections using send/receive ports on the rear of the amp. Based on that, would my output mode setting be best suited for font combo, or should it be set to rear combo? Thanks again!

[@fredyrocazaurus8420]

Hi, is there a way to access user preset bank from the unit itself, without the computer interface?

[@evangelannobilbrew7090]

Tnx for your video, pls what is the best output setting for a live situation that is when you connecting directly into a PA or DI?

[@BenjaminKanarek]

I am getting the Nux MG 30 tomorrow. To connect to the computer, (I am using the Steinberg UR22C hardware interface) do I just go from my NUX 2 outs to the Steinbergs 2 ins and record directly to Garageband or Logic Pro from there or is there another software app I have to use? As Angelo stated, I set up a new track in Audio mode in Garageband to start recording from the Nux. Is that the correct procedure?

[@abrandaol]

I have a NUX MG-30 in the Mandarin version. Is there any way to convert it to the English version of its software/firmware? The latest Update, V4, is not compatible with the Mandarin version

[@steelerman5830]

Looks great .what output mode would I use it I want to connect to a FRFR speaker like the Headrush 108?

[@yamilcastillo861]

i have the same question

[@BenjaminKanarek]

How do I raise the input volume when the guitar plugged in?

[@luizdiaz5196]

Is the "Studio Direct Out" setting for going straight into studio monitors?

[@kevrem984]

Yes, or for direct recording, like you would do with an interface.

[@levinabarinshi6747]

the differences in the volume of the presets of the MG 30 are incredibly! extreme, so i can not step through presets without blasting my speakers. how to fix it?

[@pauljosse]

Wow this is actually a pedel I might be able to understand

[@JayTheLane]

Useful video but it would be great Id you could make a proper manual 🙏

[@chrissteffers6931]

nice video thx!

[@lars_21_gitarista53]

Hello, still cant access to quicktone editor of my MG30 to my laptop 💻. My MG30 still in old version, if I update in the latest version. It will turn into ghost presets. Coz I can't back it of in quicktone editor. Can you help me pls.

[@repassero]

Great vídeo. Please, How can i turn off The global equalizer?

[@emierminio5219]

Hi, i've USB connection issues and Windows 11 pro...when i run "firmware updater" Mg30 Is seen as connected ( but where can download fw files?..) The Unit Is correctly detected in Asio drivers sw and have no hw compatibility errors in Device Manager.. But At Quick Tone setup it immediatly stops with " waiting for USB connection" ...and never connects! I'm getting nervous....

[@roysaragih8816]

Hi, I can't install the software. It seems the laptop cant detect the effect. Could you give an advice for this? Thanks

[@roysaragih8816]

@Dogtag KZ hi, you need to update the firmware first. After that, it will be detected

[@JayTheLane]

Update the firmware bro.

[@madiimad]

PLease connect through USB 3 ports only!

[@tonkageorge]

It’s a real bummer that Nux can’t get these kit to resellers. Backordered 3 months.

[@AngelMartinez-qs3cf]

Hi I have a question, when I turned on my MG30 today, it displayed a "System Data Error", reset back to factory settings. So I did that and I restored it. Needless to say, I was upset, since I didn't back up the presets I created. Now I restored the unit back to its factory settings, but now I not getting any audio. When I plug my guitar cable into the input port of the MG30 and connect my guitar, I don't have any sound. Can you please help? Thank you.

[@nuxaudio]

Please calibrate the expression pedal.

[@lennonsilva7908]

Is it possible to change language from Chinese to English?

[@richb6291]

Hi can you please help , as I have received my NUX MG30 today and having downloaded the Tone Editor software too I thought it would be easy to hook up and get started !!! .The software keeps requesting I plug in a USB cable - which is already in place , I have changed the cable still it does it and will not allow me to progress beyond fist screen. Also top left is a drop down midi box with an red X through it . Drop down options suggest MG30 in both box's , is this correct nd can you please help ??

[@madiimad]

I had the same issue, (my device was not recognized) in the firmware updater! then, i realized that i was connecting it through USB 2 port, so it wont work this way. Make sure you are using USB 3 !

[@richb6291]

@@madiimad Hi Ivan , thank you for taking the time to reply and for your suggestion - it was a great help .

[@madiimad]

@@richb6291 so, now your device is recognized?

[@richb6291]

@@madiimad Hi Ivan all fine & dandy now - many thanks for your kind help.

[@madiimad]

@@richb6291 glad to help. Now I'm asking for it: since last week I cannot enter Nux site. Isn't loading. Tried every browser . No clue. I want to download the quick tone app. Is anyone able to enter the official one? Thanks

[@walterbunajul2890]

What is TRIM?

[@sergiorsp3946]

Please, I don't know how to turn on the wha... Could someone help me, please?

[@marcielsouza9201]

Teria comonmudar o indioma da pedaleira? A minha esta em chines e eu queria colocar em português l

[@denyazudin4603]

How I can sync delay?

[@male3083]

Can anyone tell me if the are overload indicators for input and output?

[@metalrap9567]

when i plug it into laptop there is no sign that device is connected. what should i do? i wanna use it on compuer, help please :)

[@denyazudin4603]

Maybe your usb-c is broken like mine?

[@madiimad]

Maybe a bit late, but i just got my Pedal today. You must connect via USB 3 port!, or it wont work on USB 2 ports!

[@onefatstratcat]

We don't need no stinkin' tutorials....

[@K4iserAlcordo]

Its the snake for me

[@LTJR.]

It came today but it's not in English which I need, and even the little manual is not in English either

[@jaymax3201]

Ok, when can I buy MG30. And how much in Tokyo？ Hurry up.

[@nuxaudio]

You may check the earliest available date of the NUX MG-30 with our Japan distributor Arai.

[@jaymax3201]

@@nuxaudio I got MP2 last December and satisfied so much. I didn't dare to buy MG300. Because of MG30. I already know the price abroad and speck. So always check ariaguitars home. I hope thirty thousand yen. Thx, NUX.

[@rocanrola]

Hi, dont work USB in Windows 8.1

[@madiimad]

USB 3 only!

[@lasu7712]

The user manual of MG-30 is very poor, there is not so much information, no reference list, i.e. memory, drum pattern list, etc!

[@lennonsilva7908]

Is it possible to change the language.. From Chinese to English?