I’m living for the dramatic music in the background over this!
@melevsreef Жыл бұрын
😄
@jessearmstrong98436 жыл бұрын
My wife purchased the nyos 160 for my CHRISTMAS Gift. She saw it. on my wish list. OMG ! I LOVE THIS SHIMMER. Worth every penny.
@SolarisDOGE2 жыл бұрын
Fantastic review, thank you so much!
@JohnJohn-hv4ef8 жыл бұрын
Welcome back, it's been a long time. Great video, as always.
@MyMidlifeCrisis20248 жыл бұрын
Great Review. That skimmer truly is a beast.
@AcuaTV8 жыл бұрын
Not a bad price for that size of the skimmer! I will definitely consider it for my next big system! Thanks for sharing!
@justforkiks295 жыл бұрын
The stand pipe is glued together and can not be take apart to clean, it's one of the complaints I have with the skimmer. Also the stand pipe is meant to be turned to make large tuning adjustments then the dial knob on top is to fine tune the skimmer water level.
@SPL-68 жыл бұрын
But will it fit in my Nuvo 10 back chamber?
@melevsreef8 жыл бұрын
+SPL ;) Time to upgrade your reef.
@SPL-68 жыл бұрын
melevsreef Just downsized from a 20 cube lol, but man one day I'll have a similar setup to yours... in the next a few decades of course! :-)
@maine9327 жыл бұрын
I sell sledgehammers...!
@madrox41327 жыл бұрын
Might have to melt it down first
@johnkazuberns70083 жыл бұрын
Just bought (Sept. 2021) a 160 skimmer and the inlet is exactly the same loose fit.
@unluckyeddy79668 жыл бұрын
WOOT! I see a notification for Melevsreef and I can't help but cheer!
@neuwave18 жыл бұрын
I just bought the Nyos 120 skimmer. Hopefully I'll install it tomorrow.
@PokeGaz8 жыл бұрын
you could try some plumbers tape around it to make it that little bit thicker and a tighter fit for those parts that fall out
@melevsreef8 жыл бұрын
+Gaz T-Rex I mentioned that at 27:40 but worried the tape might get sucked into the needlewheel impeller and damage something.
@PokeGaz8 жыл бұрын
you could put it so its not close the edge maybe? ive used it for many things and haven't had it unravel
@melevsreef8 жыл бұрын
+Gaz T-Rex I was thinking about maybe putting three dots of Super Glue Gel at 4 o'clock, 8 o'clock, and 12 o'clock. Let them dry into slightly raised bumps and then provide enough friction for that one part.
@PokeGaz8 жыл бұрын
yeah that could be a good idea too
@wolfpack70818 жыл бұрын
Back to making vids! Great job!
@OblivionIce8 жыл бұрын
Great information. Just ordered one for my SPS Frag system.
@ldballoon47 жыл бұрын
Great review, Mark.
@sheldonjessup8 жыл бұрын
Finally! it came out! well done sir!
@andrewhales97718 жыл бұрын
Finally a new video!!
@zekth85048 жыл бұрын
I was thinking about getting one, was just waiting for a review. You just convince me. Awesome job as always. Cheers from france ;)
@uknowwho808 жыл бұрын
Great review ! Thank you for the previous message .
@batandball136 жыл бұрын
My feeling is that there should be no build up of crud in the neck of the skimmer, if so then this is a design issue. The neck should perhaps be narrower to force the bubbles into the waster ring... or you are not generating enough bubbles in the column so the protein doesnt make it over the top....
@melevsreef6 жыл бұрын
All skimmers build up crud in the neck over time. If you wait too long, it gets quite thick. I'm spoiled by my Skimmer Swabbie, which I've relied upon for many years. My smaller skimmer doesn't have one, so I clean that one more frequently. I've used about a dozen different skimmers over the years. Bubbles can only lift so much stuff. ;)
@ericleahy39518 жыл бұрын
I didn't know these were available in North America... as I have 2 of the 220's on my systems, and I love them
@AlxJrz4018 жыл бұрын
ABOUTTIME!!! brb getting some popcorn and drank. I need to hear this!
@AlxJrz4018 жыл бұрын
Fantastic review, thanks for the update. I like several mentions easy to clean, low wattage, quiet and $150 for motor replacement. How is customer service treating you on that prototype skimmer? I've seen ReefingTexan's review on his 220 and how he has been ignored on an issue with the collection cup sticking.
@melevsreef8 жыл бұрын
+Alex Juarez A few days ago, I read on his video comments that his skimmer was replaced by Nyos.
@ScottM8 жыл бұрын
awesome job....I think I need to stock up on oranges....
@melevsreef8 жыл бұрын
+TheScott21467 Right?! lol
@daveonbass798 жыл бұрын
sooo....did the smaller one have the same loose venturi tube problem of was it "fixed" by then/on that model? and as usual...thanks for the great video/review.
@melevsreef8 жыл бұрын
The smaller Nyos skimmer was perfect, as explained in the video. No issue at all.
@daveonbass798 жыл бұрын
Thanks for clearing that up. They look amazing. I guess now I just gotta save up.
@phrozen4life7 жыл бұрын
So its been a year since this Review hows that Quantum 120 on the frag tank holding up? Possibly a Quick review on that one?
@slave2_myreef3496 жыл бұрын
thank you for this wonderful review it help me to make my decision to buy this skimmer thank you
@pedroarjona4018 жыл бұрын
Hi Melevs Huge fan, Merry Christmas. I need your Help please. I have exactly the same problem you have in the vídeo in the minute 21:50, when you say "i dont really know how i did this" My nyos is stucked too and i cannot regulate the water with the wheel anymore. I see that you somehow fixed it.... how?... Mano thanks in advance
@melevsreef8 жыл бұрын
You can't unscrew it up or screw it down again? I just don't know how they actually made that part since I couldn't figure out how to take it completely apart myself. You do have a warranty if it is actually broken, so I'd be sure to contact Ecotech/Nyos for help sooner rather than later.
@pedroarjona4018 жыл бұрын
No I cannot unscrew it up or down, it si locked at the bottom, same as yours in your vídeo. I thought you figured it out how to fix it since later in your vídeo works again
@melevsreef8 жыл бұрын
Maybe a small snails is in there, blocking it from moving. Something is definitely preventing the move. You may need to contact NYOS.
@ericolsen97998 жыл бұрын
awesome vid. We missed you. Business must be great. Thank you for info.
@connyathanasopoulos25167 жыл бұрын
Hi Marc. Great video! I just purchased the Nyos 300- love it! I have the same loose Venturi - how have you managed this?? I appreciate your help! Thanks again..
@melevsreef7 жыл бұрын
What I did was apply a drop of super glue gel on three equidistant spots (4pm, 8pm, 12pm if you think of the circle as a clock), let it dry, then sanded it slightly. Those tiny mounds of glue create enough friction to keep it in place. Hope that makes sense to you.
@connyathanasopoulos25167 жыл бұрын
Thanks Marc!! You're the best! Great advice!
@uknowwho807 жыл бұрын
Thank you for the great video, but the pumps seem too small for that skimmer. I hope you didn't get rid off your old skimmer. Keep it just in case of an emergency.
@melevsreef7 жыл бұрын
I'm still running the Nyos on my 400g reef, and am very happy with it. I do have my old skimmer in the backroom, but I may never need to use it again. :)
@cheekeongng46087 жыл бұрын
Hi. Great review! Thank you so much for such a detailed review of the skimmer. I am planning to start a 250gallon reef tank and contemplating between the Quantum 220 and the 300 model. If Budget is not a factor do you think a 220 or300 will work better for a 250 gallon tank? Also May I know where you get the swabbie?
@melevsreef7 жыл бұрын
+Chee Keong Ng the 220 would be the best choice for you. The swabbie comes from AvastMarine.com
@cheekeongng46087 жыл бұрын
melevsreef Thank you so much for the information.. appreciate it..
@clamdigr6 жыл бұрын
I know this vid has been out for a while Mark, but some teflon tape wrapped around the Venturi tubes would have probably helped keep them in place.
@melevsreef6 жыл бұрын
Thanks. I ended up fixing it with something better. My concern was that teflon tape might wick its way into the intake of the pump.
@clamdigr6 жыл бұрын
Makes sense, glad it got sorted out. I do have a question...I'm considering upgrading to the Quantum 160 from the AquaC EV 240 I currently use (it's been great except for the 145 watts the mag 18 consumes and its hard to clean the internals), how is the smell from yours? The EV 240 has a lot of air flow out of the collection cup drain fitting and I have it plumbed to blow outside the house, otherwise my fish room stinks, not to mention a small but measurable increase in humidity in the room. Thanks in advance for your time, love the videos!
@arturreef81177 жыл бұрын
I need help, if I list my setup and parameters could you help me please 🙏
@ramihuus7 жыл бұрын
Would it be possilbe for you to make a proper video on dialing in the quantum skimmer. I'v had mine for a year now, i love it, but i dont quite get as milky foam production, i'v been trying to play with the height (how deep the skimmer sits) and still the foam on the skimmer body seems more transparent. Only time i'v got the foam to be allmost completely white and milky was when i open the air valves completely, the skimmer sits in shallow water (8") and the water outlet is like 80% closed. But in that case i get tons and tons of small microbubbles in the sump, where some of them find a way to my DT. HELP me Marc!
@ramihuus7 жыл бұрын
And to add, i love the skimmer because it is quiet and pretty, easy to manage and clean, super slick looking, im just having trouble tuning it in. And the foam production is just bad, i don't get that thick foamhead unless i skimm extreamly wet tea like skimmate.
@melevsreef7 жыл бұрын
I have the air wide open on mine, and the water level is set so the bubbles are 'boiling' right at the base of the collection cup. That's my sweet spot. How often do you check on your skimmer daily? Is there a time of day when it is running nicely -- foam production is often affected by additives, foods, and barometric pressure.
@ramihuus7 жыл бұрын
I empty out the skimmer daily/every other day. i set my 'bubble line' to collection cup bottom level, that way i get quite even skimmate but its really really pale in colour and allmost no patrticles int he skimmate and if i drop it down to the part where the cup screws off, 80% of the stuff just sticks to the inside of the neck. Maby ill just have to get a squeekee, to clean the inside of the cup.
@echopiece798 жыл бұрын
Nice review Marc! For what it's worth my BM Curve 7 always has condensation in the collection cup like that. Still works awesome though
@melevsreef8 жыл бұрын
+echopiece79 Thanks! Perhaps part of that was due to cooler room temperatures versus reef temperature. I'm not seeing that condensation now that things are warming up a tad. My A/C is running daily again. :)
@Ellery-USA8 жыл бұрын
I Agree the Swabbie is awesome.
@tempestscout27 жыл бұрын
Hi Melev! Any chance you can put out a review on your NYOS 120?
@melevsreef7 жыл бұрын
Since they are essentially the same, how about I give you a written review here? Very quiet, easy to control, simple to disassemble and clean. The neck is very small, so I can't use an auto cleaner. I have a drinking glass brush to clean the inside of the body and the neck of the collection cup. It's on a 1.5" stand because it seems to work best around 7" deep.
@tempestscout27 жыл бұрын
Thanks Melev. I appreciate the small footprint as I have a small sump and would like more room than my Reef Octopus 110. Your videos are great, again thank you.
@melevsreef7 жыл бұрын
Sure thing. I'm working on a video about cyano now, and you'll see it featured then. :)
@googIereallysucks7 жыл бұрын
melevsreef is the nyos 120 sized properly for your 60 gallon frag tank? I am wanting to put it on my 50 gallon frag tank.
@tempestscout27 жыл бұрын
googIereallysucks I can say that my 120 started pulling very dark skimmate out immediately when I started it up. I have a 34 gallon, but I don't think he would have chose the 120 over the 160 if it couldn't keep up
@00Mass006 жыл бұрын
Can you make an episode of the real number crunching engineering (maybe CFD Simulations) of skimmer design? :D
@melevsreef6 жыл бұрын
hehehe
@johngayle27727 жыл бұрын
Hey mark are these nyos skimmers completely quiet my current skimmer is very noisy
@francisjoelmathew8 жыл бұрын
Awesome Video Sir .. Extremely informative for an aspiring reefer like me .... I love the back ground soundtracks as well.. May I have a fill on that please?
@melevsreef8 жыл бұрын
Thanks. I didn't understand your question, though.
@francisjoelmathew8 жыл бұрын
Sorry for the local slang Sir. I would like to download the soundtracks on the video ... Sorry for the trouble Sir.
@melevsreef8 жыл бұрын
No problem. The music I used is linked in the video description. Hope that helps.
@francisjoelmathew8 жыл бұрын
Thank You Sir
@francisjoelmathew8 жыл бұрын
Do you ship products to KSA ??
@wheelsdeal6 жыл бұрын
Did they fixed the venturi issue on the new smaller sized for your fragtank or it also has the issue?
@melevsreef6 жыл бұрын
All the other sizes are good to go. And I believe the Model 300 has long since been corrected as well. For mine that I still use now, I applied a few drops of super glue gel around the area that inserts into the pump, let the glue dry, then sanded it lightly. It stays perfectly in place, ever since. :)
@wheelsdeal6 жыл бұрын
Thanks for the quick reply.These skimmers are getting very popular among reefers.May change my Deltec SC 1455 to one of these in the future.
@davileett12247 жыл бұрын
Marc, did they fix the grey pieces from falling out? I would suggest maybe a small rubber band or o-ring?
@melevsreef7 жыл бұрын
I applied a few drops of reef glue onto the gray pipes, let it dry, and gently sanded it down a bit. That seemed to add just enough friction to keep them in place. All the new ones are fine -- mine was a prototype so they weren't as snug as they needed to be.
@ska2dt8 жыл бұрын
I noticed a smaller version Nyos skimmer in the background, will that be installed on another tank. Also, when using the neck cleaner (swabbie?) how often do you have it cycle. I'll have to throw on the Star Wars soundtrack next time I'm cleaning and see how it goes. Lol
@melevsreef8 жыл бұрын
+Darren Thomas I'm using the Nyos 120 on my frag system. The very last minute of the video shows it in place and what the first day pulled out of my system. The swabbie needs to be repaired (the motor died recently), but once fixed it will run every three hours for 2 minutes per session. That equals 8x per day. #starwarsftw
@915Mang8 жыл бұрын
That skimmer cup though
@ArrickthaRed8 жыл бұрын
Omg been waiting forever for this thank you. skimmer looks great looks very easy to adjust. Wish I would have got one when I got my vertex but nyos were just too new and there was no info on them at the time. I have one question I saw on another channel a guy had the 220 model and had an issue with the skimmer cup fusing to the body and not being able to remove it. He had a real issue with getting a replacement and ended up getting another skimmer entirely. Was just wondering if you heard of this and if you has any issue?
@melevsreef8 жыл бұрын
+Arrick L I saw the video. Very strange, but glad it was resolved. Perhaps silicone grease on the gasket would be a good preventative?
@sandureef7 жыл бұрын
pls, i want the link of the video
@johnhilton13608 жыл бұрын
do you twist the tube for large adjustment and the screw for fine....or just use the screw
@melevsreef8 жыл бұрын
+John Hilton I use the large adjustment knob as explained in the video.
@johnhilton13608 жыл бұрын
OK thanks... Ps.. be great review
@jmrjmr9136 жыл бұрын
Are you still running this on your tank? I’m considering this skimmer for a new tank I’m setting up.
@melevsreef6 жыл бұрын
Sure am. It's been running for several years now.
@spitzerzach8 жыл бұрын
Great review! Recently installed a nyos 120 on a new cycling tank. I can open the air valve fully without the skimmer overflowing. Is this normal? Thanks!
@hvtv936 жыл бұрын
Hello, Do you know where can I find the replacement pumps for this Nyos Quantum 300, which is the Quantum 5.0 ?
@melevsreef6 жыл бұрын
Try contacting Ecotech Marine if you are here in the U.S.
@billstewart25867 жыл бұрын
I have a dream! I want to make a 500 gallon reef tank. In the mean time, could a skimmer this size (this on in particular) be used in 160 water system? I have a 125 tank and 75 gallon sump. TY sir
@melevsreef7 жыл бұрын
I think the Quantum 300 wouldn't run right on a 160g. The Model 220 is rated 135-530g, so that would probably be your best bet.
@chriscrigger58238 жыл бұрын
Your really good at acrylic. Make a double u shaped piece and epoxy that to each venturi. Then just drill a hole though the middle into the skimmer body.. Good to go.. :)
@hvtv936 жыл бұрын
Thanks Sir !
@nolerivera55127 жыл бұрын
I just got the new Nyos 160 . It overflows a lot . How high should I put the water level to get a nice foam to skim in my sump?
@melevsreef7 жыл бұрын
That skimmer should be standing in 8" of water. If it is submerged more, place it on a skimmer stand. I set the water level (or the top of the bubbles) even with the bottom of the collection cup. Tiny adjustments one way or another to find the sweet spot, but keep in mind as the weather changes in your area, the skimmer will react to those barometric swings. You may have to adjust accordingly until the weather is stable... you'll get a feel for it.
@nolerivera55127 жыл бұрын
melevsreef thanks for the info You said that the barometer changes the height of the skimmer water level and functions?! That something new to me. Is that why my skimmer overflow only at night? I did lower the bubbles at the neck of the collection cup and its wrkin better!
@DarrenlinesUk8 жыл бұрын
Hi Melev, sorry this is not related to your video, but I saw you wearing a sexy shrimp t-shirt in one of your other videos and was wondering if you're planning on shipping to the UK at any time in the future. I'd love one of those, but unfortunately I'm not in the US or Canada.
@melevsreef8 жыл бұрын
I can check what it would cost to ship to your area. Use Contact Us on my site and give me your full address, and I can get a quote.
@rickg84392 ай бұрын
You still using/loving this skimmer?
@melevsreefАй бұрын
I am still using it!
@fabricioprandi39385 жыл бұрын
Hello Friend I am seeing if I buy a regal octopus or nyos, I would like to know if Does the nyos skimmer acrylic support ozone, to work together use (c200 sander)? grateful for the support. hugs from brazil
@melevsreef5 жыл бұрын
I'm not 100% sure, you'd better check the official brands' pages and see what their descriptions/directions state.
@MyGetmoney15 жыл бұрын
What size sump you recommend for that size skimmer I got the same one.
@melevsreef5 жыл бұрын
A big one. This skimmer needs about 18" x 18" all by itself. Plus the drains, a return zone, reactors, if you want a refugium.... You'll probably be looking for a sump that can hold 100-150g of water. What size tank is it going under?
@MyGetmoney15 жыл бұрын
So I put it on my 180 gallon reef tank because my eshopp 300 broke so I got this one.
@melevsreef5 жыл бұрын
@@MyGetmoney1 You got the Nyos Quantum 300 for a 180g reef? That's beyond overkill.
@keylandstewart71535 жыл бұрын
melevsreef I know but when I get my 300 gallon that's where it's going.. lol
@jaredfell8 жыл бұрын
about time!!
@melevsreef8 жыл бұрын
+Jared Fell So what did you do to pass the time? ;)
@jaredfell8 жыл бұрын
hey mate! im an aussie, i live on the gold coast :D to pass the time i have a 1600L tank :)
@jaredfell8 жыл бұрын
Im a Fan of your vid's :)
@melevsreef8 жыл бұрын
Very nice. Got a picture or video of it?
@garywitham48158 жыл бұрын
Hi Marc, I have the Nyos Quantum 160 on my new reefer 425XL. its just about settled down now after nearly 2 weeks and is producing a nice foam. I took your advice and set it up with gate fully open and air screw fully open then tuned it in and waited.. great advice.Just one question, it seems to be producing lots of micro bubbles into the sump from the gate side / outlet of the skimmer, is this normal?
@melevsreef8 жыл бұрын
No, no bubbles should be coming out of the exit pipe. Either something isn't assembled correctly, or perhaps you have something in the water that is causing that. The only time I might expect that result would be if I had recently used Chemi-Clean to kill cyanobacteria. Be sure to check how it was put together first, and then pivot the skimmer's output so it isn't right next to the baffle going to the next zone. More travel time will allow any excess bubbles time to rise and pop, and not end up entering the return pump.
@averagegm4 жыл бұрын
Where did you buy the automatic scrubber
@melevsreef4 жыл бұрын
The squeegee attachment? Avast Marine sells them.
@feedthatreefaddiction15088 жыл бұрын
I love my nyos 120!
@BC-fy1wn8 жыл бұрын
Does this skimmer collection cup come off by turning clock-wise or counter clock-wise?Seems to be more than a littlg grumbling online youtube and some forums.Not to mention customer service from Nyos is no help and Ecotec?Has had to handle issues.What say you?You are an authorized dealer ,correct? BC
@melevsreef8 жыл бұрын
+Bret Crane I answered you on the other video already. Yes, I'm an authorized dealer.
@captainwin63335 жыл бұрын
Why USA have bad warranties? It's 2 years minimum in Europe.
@pelphrey8 жыл бұрын
Arrived early for the 360p release!
@tortelini876 жыл бұрын
A+ for that final orange comment 😂👍
@sheldonjessup4 жыл бұрын
Are you still using this Skimmer? i am looking at it now and was curious if it is still kicking?
@melevsreef4 жыл бұрын
Dragon Slayer yup, love it. I post pics of it on Instagram, and it was featured in my Reef’s 6 year anniversary video.
@reeferexplained88463 жыл бұрын
Hey Marc, thinking of Nylos 120 as I'm running bubble magnus curve 7 but it's now humming noise alot. I've taken apart cleaned it. Ordered new pump and impeller if this doesn't fix it would you say get the nylos 120 as super quite. Tank is redsea e-260 69 gal with sump. Great videos
@DanielHJeffery8 жыл бұрын
Maybe wrap some plumbers tape around the tubes so they fit better.
@melevsreef8 жыл бұрын
I was concerned that the tape would unravel and get sucked into the pumps. The tubes haven't popped back out in a very long time, btw.
@insectkiller20058 жыл бұрын
Hi do you have a review of the nyos 120 ?
@melevsreef8 жыл бұрын
I haven't done one yet, but I probably should. Maybe a written one since this video covers all the features that Nyos offers quite well .
@insectkiller20058 жыл бұрын
melevsreef that would be great as I'm having a nightmare on the correct tuning with correct air and water level ratio
@melevsreef8 жыл бұрын
Open the air valve fully. And set the water level (where all the bubbles are making a head) right at the base of the collection cup.
@insectkiller20058 жыл бұрын
melevsreef ok many thanks I will try that
@yoshimoto26007 жыл бұрын
melevsreef need a review on the 120 . that would be great thanks
@timlaw16126 жыл бұрын
use a rubber band around the base to hold those in
@melevsreef6 жыл бұрын
I resolved it with a few drops of glue to create enough friction to stay put.
@Lucas-gk8tg8 жыл бұрын
Im fine with my RE doublecone 200. I didnt wanted to take any risk of noise in my bedroom. Btw did you looked for red bloodworm eggs? And avoid buying JUMBO worms, this shit is just bad and if you thaw it , you will see what i mean.. My Copper is still just eating those and nothing else. Greetings from germany
@melevsreef8 жыл бұрын
My copperband seems to like whatever he finds in the reef, but every night the frozen food hits the water with some other options. :) So far, so good.
@tsurro80868 жыл бұрын
Nice video, I saw reviews that they are junk, the cup seized up on most! Good luck
@melevsreef8 жыл бұрын
+T Surro Nothing like that has happened with either of the two I have.
@akashramesh88838 жыл бұрын
can u send me a link i would like to purchase one
@melevsreef8 жыл бұрын
What size tank do you have? How many gallons are you skimming?
@TheMisterETTE6 жыл бұрын
Got a 220, it is really noisy. :( cant enjoy watching tv with the skimmer running in the back... any1 else having problems?
@melevsreef6 жыл бұрын
Where is the sound emanating from specifically?
@L8Brakers6 жыл бұрын
Can you run ozone on this skimmer? @melevsreef
@melevsreef6 жыл бұрын
That one I do not know. You'll have to contact Ecotech Marine to get that answer.
@ukaszwawrzynowicz53273 жыл бұрын
What is perfect water level?
@melevsreef3 жыл бұрын
Every skimmer has a recommended depth. Check their recommendations.
@ukaszwawrzynowicz53273 жыл бұрын
@@melevsreef i know but i cant find
@melevsreef3 жыл бұрын
@@ukaszwawrzynowicz5327 I like 8" deep for the Nyos Quantum 300.
@pjfreak998 жыл бұрын
Glad to see someone else who's man enough to use his bare hands to clean the skimmer. No gloves or sponges for us!
@lincolntowns14803 жыл бұрын
They really didn’t let you keep this?
@melevsreef3 жыл бұрын
They did. Still using it. :)
@magwarblood7 жыл бұрын
Is this still virtually silent ?
@melevsreef7 жыл бұрын
Absolutely. That's one of the biggest perks of this skimmer.
@magwarblood7 жыл бұрын
melevsreef have you ever herd the 220 ? I have one and absolutely love it , got it second hand and mine did hum quite a bit ,, didn’t know if this was normal for the 220 or it may need to replace the impeller and bearings or perhaps a new motor
@cubanreefer15827 жыл бұрын
Do you still have it today?
@melevsreef7 жыл бұрын
CUBAN REEFER Yes, just cleaned it tel days ago.
@alexmccutcheon91677 жыл бұрын
you should sell the "melevsreef reef cleaning credit card"
@melevsreef7 жыл бұрын
I love it. ;)
@322sheffield8 жыл бұрын
cleaning to dramatic music...lmao...i love it
@Justthemow6 жыл бұрын
Warm water melts salt crystals like a hot knife threw butter
@goodall1bay6 жыл бұрын
melv, mine is BIGGER than yours .. soo there
@no-hope-in-the-pope8 жыл бұрын
Nyos totally ripped off every feature deltec started putting on all their TC and SC line of skimmers 5+ years ago!
@melevsreef8 жыл бұрын
I've never looked at a Deltec that closely. I've seen them displayed at Macna year after year, but the price tag kinda made me shy away. They looked beautiful; I have no idea if they have the same features that Nyos has, or not.
@no-hope-in-the-pope8 жыл бұрын
Ive owned the old AP series and the new white TC and SC series. I finally settled on BK. Deltec's are way overpriced IMO. You are better off sticking with nyos
@nwyk1536 жыл бұрын
meh. If i want a expensive skimmer, i just go all out with Royal Exclusive.