NZXT H9 Elite ASMR PC build

This is an ASMR style video with no commentary. If you want to hear the tips, watch here • How to build an NZXT P...
Here I'm showing you how to build an NZXT gaming PC with all the steps including the wiring of the fans, the setup of an all-in-one cooler, the wiring of the power supply unit, all the connections for the motherboard, where to connect an SSD and more besides.
The specs of this build include:
Case - NZXT H9 Elite
Motherboard - NZXT N7 Z790
CPU - Intel Core i9-12900K (13th gen would be better)
RAM - Kingston Fury Beast DDR5 32GB (two sticks)
NVMe SSD - Corsair MP600 GS (go.corsair.com/gbmMY2)
NVMe SSD - WD_Black SN850 ( • How to install WD_Blac... )
PSU - NZXT C1200 Gold (nzxt.com/en-GB/product/c1200-...)
Fans - NZXT F120 and F140 RGB Duo fans - • How to wire and connec...
GPU - Zotac GeForce RTX 4080 16GB AMP Extreme AIRO • Zotac GeForce RTX 4080...
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
NZT H9 Elite:
Amazon US - amzn.to/40pMUiR
Amazon UK - amzn.to/3Yo0t0J
Amazon FR - amzn.to/3Ylcvro
Amazon IT - amzn.to/3X1SWDz
Amazon DE - amzn.to/3Hxtjoe
Amazon CA - amzn.to/3Ygg6Hk
NZXT fan controller:
Amazon US - amzn.to/3HK0Tsw
NZXT - nzxt.com/en-GB/product/rgb-an...
Amazon UK - amzn.to/3HiQhQ9
Amazon FR - amzn.to/3RhSsbe
Amazon IT - amzn.to/3jhgOW1
Amazon DE - amzn.to/3HmKlWn
Amazon CA - amzn.to/3HfhS4s
USB Splitter:
Amazon US - amzn.to/3XTiunw
Amazon UK - amzn.to/3wJlGWU
Amazon IT - amzn.to/3HHEmwD
Amazon DE - amzn.to/3kYwTAt
Amazon CA - amzn.to/3WRcfPO
Amazon FR - amzn.to/3kVl1iG
Related watching you'll find useful:
NZXT Kraken Z73 RGB Intel installation • NZXT Kraken Z73 RGB In...
NZXT C1000 PSU install and setup guide • NZXT C1000 PSU install...
NZXT N5 Z690: Unboxing and Feature Overview • NZXT N5 Z690: Unboxing...
Common Mistakes You Might be Making with Your PC Fan Setup! • Common Fan Layout Mist...
Don't make these mistakes with your NVMe SSD installation • Don't make these mista...
NZXT H9 Elite specs:
Motherboard Support:Mini-ITX, Micro-ATX, ATX
Enclosure Type:Mid-Tower
Case Material:SGCC Steel, TUltra-clear Tempered Glass, Dark Tinted Tempered Glass (Black only)
Height:495mm (With Feet)
Width:290mm
Depth:466mm
Weight:13.1 kg
CPU Cooler Clearance:Up to 165mm
GPU Clearance:Up to 435mm
PSU Clearance:200mm
Cable Management:91mm
USB 3.2 Gen 1 Type-A:2
USB 3.2 Gen 2 Type-C:1
Headset Audio Jack:1
Standard:7
Vertical:0
DRIVE BAYS
2.5":4+2
3.5":2
Fan support:
Side:3 x 120mm
Top:3 x 120mm / 2 x 140mm
Bottom:3 x 120mm / 2 x 140mm
Rear:1 x 120mm
Filters:All Air Intakes
RADIATOR SUPPORT
Side:Up to 360mm
Top:Up to 360mm
Bottom:Up to 360mm
Rear:Up to 120mm
FAN SPECS
Model:F120Q (Case Version)
Speed:1200 ± 240RPM
Airflow:62.18 CFM
Static:1.05 mm - H2O
Noise:25.1 dBA
Fan Connector:3-pin
FAN SPECS
Model:F120RGB Duo
Speed:500 ± 1800RPM
Airflow:48.58 CFM
Static:2.42mm - H2O
Noise:29 dBA
Fan Connector:4-pin
🏆Big thanks to my super awesome KZbin members:
SirSpawnsALot, Meatykeyboard, Beaster Bunny, JayShank007, Rawrr483, DStarastins, McFarty, Riggsy79, Chief Hao, Kraken Tortoise, Aaron Yarden, Paolo madamba, Space Cannons, Mike S, Kyle and Jason🏆
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - theprovokedprawn.com/
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com/shop/theprovok...
📸 Recorded with www.amazon.com/ideas/amzn1.ac...
Shure SM7B and GoXLR - • Shure SM7B and GoXLR M...
PLEASE NOTE
Affiliate links:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions.
#ASMR #ASMRUnboxing #ASMRTech

[@skypallman6169]

I like how you ran the AIO tubes. I'm building one right now. Try going to the back of the computer and unscrew the 4 little black screws that hold on the NZXT "signature bar/wire hider" (what ever it's called) and run the tubes/pipes behind it...then put the bar back up and screw it back on....really cool look and I haven't seen anyone else do it! Keeps the AIO tubes/pipes tucked out of the way. You just have to remove that little clear window. But I took a Dremel to mine because I had to make room for the streamer anyway that way you don't have to completely remove the little piece of glass if you don't want to. Just an idea since you seem to do a ton of different builds. You are the man and have helped me out so much in my process of over 6 months gathering all my parts in deciding what I wanted to do. Got the same case the elite version I painted the inside black and also tinted the glass windows. I wanted to run the Lian il fans so bad. I bought them all and was going to try and integrate them through Icue as you and one other guy made videos about. But I didn't know how they would react light wise, so after spending all that money on the LL uni fan sls with 6 of the reverse.... I just decided to go with the new Corsair Icue QX SYSTEM. Literally cannot believe Corsair doesn't get with the program and make a reverse fan as well. Not least these QX fans look better than most with the frame mounts of the fan showing. Trying to figure out now how to get three different streamer pro v2s to work with Icue... Don't think I can run three off of the streamer V2 controller though.

[@Angel-wr4gg]

Hi from Washington State, USA! Just wanted to thank you. I'm about to build my computer and a lot of your videos have helped me out.

[@theprovokedprawnasmr]

Glad to help!

[@moonman7967]

​@@theprovokedprawnasmrhow come they don't provide thermal pads for the other two nvme slots?

[@RikoSaito]

That looks amazing!

[@theprovokedprawnasmr]

Thanks!

[@calvinm1866]

Nice build, Prawn.

[@theprovokedprawnasmr]

Thanks!

[@bariksag_akk2406]

hi if your going to pun a rgb fan on the single one, where you going to plug the rgb?

[@JeremTH86]

What happened at 33:00 ? The 3 fans couldn't fit behind the AIO? Can I install 6 fans on it somewhere in the case?

[@alexxdlol454]

Thank for your video :)

[@theprovokedprawnasmr]

Thanks for watching

[@harrison298]

Out of curiosity, why did you decide on 140mm fans on the bottom instead of 3 120s?

[@Dgamax]

Di you tried to up side down your rad to avoid bubble and hiding pipe behind your GPU ?

[@MichaelKahn89]

Out of genuine curiosity, how do you feel this case looks in person? I love the aesthetics but I can't help feel that it's just a "little" too...tall or wide (I can't tell which) and thus looks a little empty inside, even when fully filled with fans and such. Does it feel that way at all in person?

[@lloydquintana9851]

I think it's more on the wide side since it's dual chamber, it's not too tall.

[@Unknown-rc6xt]

It’s fine dude. Let go

[@trieulong2131]

it would be perfect with some cables extension tho

[@GabellUnrama666]

Hi, i would like to know if you bought the gpu vertical mount or it husy came with the h9 elite

[@theprovokedprawnasmr]

It's separate

[@GabellUnrama666]

@@theprovokedprawnasmr tks

[@DanaShalene]

How do you get it to change color

[@xoromi]

you have to download the nzxt cam software, where you can change the rgb of the fans

[@MrGivesuccess]

I seen so many people building this H( Elite so I built one too. I like the look but a few things i do not like. One is the top glass part. It has to turn the exhaust air around a few corners and that slows down the flow. @ns is the DUO fans on the aio rad. They do not sit flat against the rad so air can blow by easier. I wish I can get the top panel from the h9 flow to put on top of mine instead of the H9 elites. IT is straight path up for hot air to get out. I got more of the CORE fans to put in it bc i dont like the DUO fans for airflow. They look btr but not so goo for airflow imoho. kzbin.infolXNcfxdT1jE?feature=share