Nzxt Kraken X53 RGB Unbox install & test

Nzxt Kraken X53 RGB Unbox install & test
GUYS IF YOU LIKE THIS VIDEO PLEASE SUBSCRIBE AND LIKE
FEEL FREE TO ASK ANY QUESTION ABOUT THIS VIDEO

[@BM24DK]

I just installed my own X53 RGB and realized the guide from NZXT has a mistake on step "3.9 CONNECTING RGB LED FOR LIGHTING CONTROL". Thanks for giving a run through of the installation to clarify the setup for me!

[@benboo9489]

i have the same mistake now.. how i can do pls ?

[@CheeseManCool34]

@@benboo9489loser

[@roachraider6169]

Thank you so much. The original manual from the website was completely off but when I found this video the install went very smoothly.

[@DjAlexander214]

4:13 for all those who came for no rgb on the fans after installing and 8:31 your welcome! and thank you to It care & computers!

[@Sir_Smokes]

Your a god among men sir! THANK YOU!

[@infinitemind4141]

Bro im looking like 200 videos only you ansered my question

[@oniku7781]

thanks man exactly what i came for, after installing, rgb on my fans wouldn’t work.

[@lucadriveby]

I was surprised when i saw the same motherboard same aio and same cpu as me

[@itcarecomputers]

😍

[@j1mbzz]

Me too. Same here

[@tbone2447]

@@j1mbzz same

[@frogdog3600]

I was surprised when I saw such a cheap power supply.

[@monsieur_skull]

Thank youu! After read 3 time the read book (bad, so basic...) after check 3 video on youtube.. this is the right one!!!

[@itcarecomputers]

You always welcome

[@4TailsKyuubi]

Can you remake the video but this time I need you to show the which fan connector it is and where to put it because I'm stuck....

[@scent2find802]

Where did u get the out cable?

[@demarquesv]

do you need a rgb controller because i plan on buying the (NZXT H510 Elite) and the NZXT Kraken X53 RGB so would i need to buy the controller for both of them

[@itcarecomputers]

No need any controller

[@Grannylit]

Is this efficient, installing the cpu cooling/ water cooling as an exhaust? I thought intake would be the optimal setup

[@lleeeoon]

intake is for better cpu temps and exhaust for better gpu temps. It‘s up to you how you want your aio to be installed.

[@joshz]

great vid! just what i needed tyvm!

[@itcarecomputers]

Always welcome

[@ethelinecimatu]

thank you for showing the cable connections, I was about to give up

[@itcarecomputers]

You always welcome and plz subscribe

[@__will__3301]

Does it already comes with thermal paste?

[@501sYt]

Does all of nzxt z and s series at this time have a lga1700 bracket or mounting adapter

[@itcarecomputers]

Yes

[@JustARandomGuy1999]

What is the case size and is it the 240mm because I want to buy the z 53 then change the fans to match the rest.

[@trilecebey]

Does kraken x53 support to lga 1700 soket i wanna use on my i5 12400f

[@itcarecomputers]

Yes

[@trilecebey]

@@itcarecomputers Ty

[@ChrissonatorOFL]

I'll probably have to put the hoses on the bottom of the CPU and bring them up, so I can use all 4 of my RAM sticks.

[@TOOL1023]

Does anyone know if one of these 240mm AIOs can cool the i7 13700k? I can't find any good ones in this electronics desert of a city.

[@itcarecomputers]

Nzxt Z53 tested with i7 12700k full load temperature was below 70 it almost same kzbin.info/www/bejne/mqK0k2Rrj5WBo5Y

[@nickyboygamingchannel3725]

I was told I couldn't place my fans the same as you because it effect the pump is this true?

[@itcarecomputers]

You can change any 12dc 0.18A fans

[@nickyboygamingchannel3725]

Also where the cpu is do u still apply the thermal compound on before installing that cooler system?

[@itcarecomputers]

@@nickyboygamingchannel3725 there is already paste no need to apply

[@nickyboygamingchannel3725]

@@itcarecomputers okay thanks

[@Mr_Triscuit]

You need to do a better job of showing what you are plugging into what 9:20 is where my confusion is. And probably beyond that too.

[@Mr_Triscuit]

All I can gather from what I see is that you are plugging something with four pins made for that specific plug. And I'm having doubts that you just plugged one of the radiator fans into that slot.

[@info2shail2010]

In the month of January even the stock coolers does the job, IDk why people doesnt do CPU coolers benchmark in MAY AND JUNE Months... when CPU cooling mostly needed, When outside temprature goes 48 degree celcius (In my Area).

[@DAG42085]

question I have the AMD 5950xt and I would like to buy one of these, there is a new version of the x53 240 snow that would look good but do you recommend a bigger one or that would be fine, 2nd I currently have a Cooler Master Hyper 212 RGB Black Edition CPU Air Cooler I would like to know if I really improve by changing I don't want to waste my money

[@itcarecomputers]

For your cpu x53 good option but i will recommend x63 280m

[@DAG42085]

@@itcarecomputers Thanks for answering I have a case nzxt 510 I imagine that x63 280 will work for me

[@itcarecomputers]

@@DAG42085yes that case is compatible with x63

[@DAG42085]

@@itcarecomputers ty 👍

[@S8BASTIAN]

9:01 WHERE DOES THE “IN” GO?

[@csskrm]

4:35 i don't know why but i don't have this cable, i have only one long in out, but they can't be plug in. Out is too big and the In is too small. Thanks to help me

[@clueless1025]

Same here, i got it to go in by carefully trimming the plastic on the out.

[@thegamerGoat18]

how dou get it rgb\

[@sukeiro553]

Should i have a nzxt controller to control the fans rgb ??

[@itcarecomputers]

No you don't need any controller

[@hunterscheltema1338]

where did the "out" cable come from at 9:01 ????????

[@echonovember2]

I want to know the same damn thing

[@Im_SSJay]

So is that extra 3 pin connector suppose to be there? Its so confusing

[@itcarecomputers]

You can connect it with cpu_fan 4pin connector

[@Im_SSJay]

@@itcarecomputers Turns out the rgb, pump and fans worked without so i still dont know what it goes to

[@joegood2474]

Your camera is so close I can't see what plugs are attached to what wires, just that you're plugging plugs together. Can't tell which ones.

[@soowie4599]

I have the NZXT cord at 8:54 not plugged in anywhere, where does it go?

[@itcarecomputers]

That one is rgb in connector that come from aio pump fans rgb connector connect with that connector

[@TheGr8Espi]

This is probably the most dumbest questions but where the heck did you get the in/out wires i only have the ones that were connected to the fan and then the spliter you had to plug everything into other then that I didn't receive any thing that plugged into the fans

[@itcarecomputers]

there is fan extension cable in box check in video 2.24 right side first cable

[@TheGr8Espi]

@@itcarecomputers I only received the splitter cord thee 1 you used at the end

[@UmutYarak]

Thank you

[@itcarecomputers]

Always welcome

[@NatsuDragnee1]

do i have to use the 2 connection cabels cause the longer one dosent fit

[@itcarecomputers]

No need to extend cable length of cable is enough

[@gerben8563]

i am bit new i have bought a gigabyte b365m ds3h motherboard is it compatible cause i dont have a aio pump connection

[@Tomxhawk]

I am thinking between this and ryujin 240. I dont know which one I should get

[@itcarecomputers]

Both are good 😊 chose lower price

[@Tomxhawk]

@@itcarecomputers They cost the same

[@KeyKay]

i just got a nzxt streaming plus, i wish it had rgb in it for $2k lmaoo

[@benfr2744]

The NZXT X53 is really disappointing in terms of software. You have to run the software at computer startup to control the pump speed and get the desired LED preset. Because it has no internal memory. If you run the CAM software (NZXT) at computer startup I go from 60 processes to 78, with 1% processor usage (processor: i7 12700k), just for the LEDs and a quiet mode at pump level, even after disabling everything in the software, it's the same. Currently I use (fan control V116) to control the pump speed and OpenRGB for the LEDs. They consume nothing in terms of procc resources at 0%, compared to this (Bloatware) CAM software, it's night and day.

[@gerben8563]

8:43 you put a fan in cpu_opt but on my mother the aint one can i just use sysfan for that?

[@wirriwarri]

no need controller for the rgb?

[@itcarecomputers]

No need

[@sukmanuts2636]

Hi , is it normal that my fans are pulling the warm air from the radiator into the case ? ( top setup )

[@itcarecomputers]

Install exhaust fans in case

[@henrygg295]

You pull the cold air from outside through the radiator inside the case, whic will be warm then, yes. This setup will improve cpu temps but most likely will warm everything else up more, depending on your case and airflow. If you have a hot cpu I would keep it, if you have hot GPU and ok cpu temps I would put it on exhaust.

[@henrygg295]

Also pulling air through the radiator rather than pushing reduces noise significantly

[@JENNIEfreakinKIM]

Do you know if this comes with an AM4 bracket?

[@itcarecomputers]

there is no bracket for am4 socket

[@techwings001]

You just use the am4 backplate to install the standoffs

[@techwings001]

Its included and preinstalled on all am4 mobos

[@phonghoang5730]

What connectors did you get the SATA cable to fit into that motherboard.

[@nohandle242]

That does not connect to the motherboard.. SATA cable is for power which comes off of the PSU there should be SATA leads for that..

[@reviewsurgeon7917]

Can I use it with LGA1700 ?

[@itcarecomputers]

Yes

[@badmantru4377]

you didn't show where you plugged in any of the wires, just that you plugged them in each mobo is different, thanks for nothing..

[@sethscott48]

Have the exact same motherboard and cooler and it's not working need help.

[@itcarecomputers]

What not working motherboard or liquid cooler?

[@sethscott48]

@@itcarecomputers liquid cooler

[@itcarecomputers]

@@sethscott48 what is problem fan not working or all liquid cooler not working?

[@itcarecomputers]

Install same as I installed in video

[@sethscott48]

@@itcarecomputers all liquid cooler not working, fans don't come on and pump doesn't come on. I have it plugged you did in the video, I have the same motherboard too

[@oemer_arn9749]

So you use CAM to control the rgb of the fans and the pump but which software you need to control the rpm of the fans? Thank you

[@techwings001]

Bios

[@techwings001]

I think

[@iiYaToz]

I have asus motherboard and I don’t know where I plug this usb 9:46

[@geniusprojectfiles]

no need for back plate?

[@itcarecomputers]

It’s included in box

[@nicolenew1708]

❤❤❤

[@pexon1985]

I have the same cooling X53 RGB on 3700x with torture test tempereture for me is to high 68 C,is that normal or i made mistake somewhere??

[@DGCastell]

check the pump's screw torque. high ambient temperature and poor case airflow can also play a huge part!

[@itcarecomputers]

It's normal

[@jekiee]

Thank you bro

[@Skatizz]

is this compatible with my MSI X470 GAMING PLUS MAX motherboard??? i have only 4 pin fans and rgb connectors i still have a doubt if it's compatible or not

[@itcarecomputers]

Yes it is No need rgb connector for that just connect usb aio pump to motherboard

[@Skatizz]

@@itcarecomputers THANK YOU

[@itcarecomputers]

@@Skatizz welcome

[@jt3696]

okay so the wires from the fan all connect to the splitter which connects to the fan header. cool

[@jt3696]

my motherboard says pump fan and cpu fan, i plug into those right ? don’t have aio pump

[@yao8]

@@jt3696 cpu fan or pump fan will do. Make sure it is at the top

[@ahmedyaseen3836]

Would this cooler be good for the i7 12 gen on an Asus TUF gaming z690 plus Wi-Fi D4 ??

[@aidenliang9826]

Depends what case, I have similar specs, but I used the z63 for my o11 mini

[@zaidous]

Is that mb using an am4 socket?

[@itcarecomputers]

Yes

[@osmanm331]

8:39 which cable is that, the one that goes to the motherboard

[@creepyguy1233]

I wanna know the same thing

[@virtual9003]

Hey ! Do i need the NZXT rgb HUB for this AIO ?

[@itcarecomputers]

No need just connect usb cable that come from aio pump to usb connector on motherboard

[@wirriwarri]

@@itcarecomputers is it the same with the nzxt x63 280mm version? no need for rgb hub

[@linkenparis9562]

@@itcarecomputers is this regular 4 pin rgb ??

[@GUCCIBRICKS1217]

My fans are not showing on my NZXT cam and they dont light up

[@itcarecomputers]

Check rgb cable again

[@jondoe7643]

The last in and out cable you put where did u connect the out to??

[@itcarecomputers]

Last cable is rgb cable connect with rgb connector thats coming from aio pum

[@jondoe7643]

@@itcarecomputers thanks for the reply back

[@itcarecomputers]

@@jondoe7643 welcome 🤗

[@mrsheshan6856]

Is that good enough for cooling 5 5600x

[@itcarecomputers]

💯

[@WisconsinCarWashChannel]

Absolutely. I have a Kraken X53 which is cooling an i5 12600k, idles around 24 C

[@PYRRMD]

@@WisconsinCarWashChannel did the kit support for LGA1700 came with the Kraken ? or you needed to order to NZXT ?

[@arunrana6170]

AM5 compatible?

[@itcarecomputers]

In new packaging yes support

[@sukeiro553]

My nzxt kraken z53 dont have this cable

[@notkayzo9541]

i cant control fan colors in nzxt cam what do i do

[@linkenparis9562]

did you figure i out ?

[@laithmajdaddenadden8441]

Can you change the display to any gif pls anyone reply

[@Edward.TheThird]

I can’t fit one of my out cables

[@F1D142]

Same

[@F1D142]

Have you found a fix?

[@Edward.TheThird]

@@F1D142 ya

[@Edward.TheThird]

@@F1D142you plug the out cable to a cable with nzxt labed in black

[@F1D142]

@@Edward.TheThird okay thanks

[@thunderb0rn974]

what motherboard do you use?

[@itcarecomputers]

Check on 5:26

[@matu4278]

can someone help? everything works fine except the radiator fan lights.

[@granthall9113]

Same

[@matu4278]

@@granthall9113 i found the problem, when i built my pc a weird cable was left over and now i connected that with the radiator and the other end with the motherboard. The cable had stickers that said "in" and "out" and the radiator has connections labeled the same

[@granthall9113]

@@matu4278 oh ok I left those out too, thanks! What port did you plug it into on the mother board?

[@matu4278]

@@granthall9113 Not exactly sure, it was something JRGB2 maybe? can't really remember it. had RGB in it though

[@inknewyork3547]

At 8:43 what cord was that I think I’m missing at cord?

[@itcarecomputers]

Cpu fan and aio pump connector

[@alexandergiii]

Halbes Videos nicht in Kamera gehalten.

[@Валентин-т6в]

Всё подробно и понятно , кроме того что невидно какой провод в какой втыкаешь . Камеру чуть дальше поставить надо было

[@sxle_]

hi, what cables are u connecting at 9:56? thanks

[@itcarecomputers]

Sata power cable

[@sxle_]

@@itcarecomputers thanks, by the way do u think this would work on a dell optiplex motherboard?

[@itcarecomputers]

@@sxle_ yes

[@universe9284]

how to control my radiator fan speed

[@itcarecomputers]

With motherboard bios or nzxt cam software

[@liudiovy]

Yo

[@denfbeta6534]

reconnect your cpu cable

[@scyzorpl]

1 ram stick 🙄

[@mook9016]

F*ck. I'm considering using this for my 'Asus ROG Strix B450-F Gaming' as my current heatsink blocks the first ram-slot. Now it seems this one does too

[@itcarecomputers]

Rotate aio pump

[@mook9016]

@@itcarecomputers Thanks. I saw that the Z63 had this effect too: kzbin.info/www/bejne/nammdWp8bMl2r6M Since I mentioned my motherboard, are there any connector-compatibility I should be aware of in any of the versions?

[@Stormbeater]

Junge wasn drecks Video ich rast hier aus!!!!

[@rafaelcolaco9319]

Can you put gifs ??

[@itcarecomputers]

No

[@thangelpas7318]

Do I need to buy any bracket for lga1700 or does it have out of the box support

[@itcarecomputers]

No need it's included

[@rony_yt]

Would the x53 supports lga 1700 and have a bracket?

[@eagler8196]

Yes it does