O11 Mini Full Build - 360mm AIO - Micro ATX!

[@ButtaBiskitHead]

I love you. Most people don't show the cable management process

[@gorgeousqueen_xo]

Glad I came across this video. I was afraid the cooling system I bought wouldn't fit but now I know it will if I put it on the top. 😌

[@Lazzmodai]

I really dig the AIO plumbing being routed to the back instead of the usual routing over the RAM. It looks so much more clean. Too bad the tradeoff is no rear fan, maybe with a 240/280mm AIO it would allow for both.

[@seabs473]

having it like that does negatively affect AIO performance tho

[@Lazzmodai]

@@seabs473 How so? It's not changing the relative height of any piece of the unit. The only difference is a 180° rotation of the rad on the x axis.

[@LadyWolvie82]

@@seabs473 - as long as the radiator is above the CPU Cooler block the build itself is fine with the AIO at the top.

[@vlmxs]

11:23 haha this socially acceptable cable management 😉👍🏻 good job! Love your builds

[@Subdubbin]

Thank you!

[@matthewtedtaotao]

I swear, all of your builds have a beautiful balance of lighting.

[@OptimuSekac]

From what it started cable management turned out pretty okay

[@Subdubbin]

Pretty okay is exactly how I would describe it too.

[@theyoungjawn]

Your content is amazing. I just built a 12th Gen DDR5 version of this child thanks to your videos. Never stop making content!

[@JayGlascoe]

YES: "I ran the side fans as exhaust because it looked nicer, but I recommend mounting the side fans as intakes. This will result in slightly better system thermals." -- Subdubbin The fan setup shown at 14:33 (side fans are exhaust) results in a negative-pressure case. Unrelated but also worth consideration: the air coming up through the front-most bottom fan and then immediately exiting through the bottom-most side fan. That bit of airflow does nothing for the system. Sometimes a negative-pressure case is desirable like with the TherrmalTake Tower 100. But useless airflow is never desirable.

[@Lonzo1112]

in a hot place like australia that has probably the most dust on the planet, what airflow design with fans would you recommend?

[@lucalyptustree]

great video bro. really appreciate the high quality edits and camera work even though you aren't a massive channel. your hard work isn't going unnoticed

[@kV18mAs81]

Your cable management is always on point..Another great build,kudos!

[@HellaFOBZ]

Just ordered this! Your build is exactly what I've been looking for!

[@josefreitas6997]

Did you order the normal silver or the snow edition? The silver is 40€ cheaper, so really don’t know what to do

[@HellaFOBZ]

@@josefreitas6997 i order the all black for 125 on amazon. doing a black and gold build.

[@Cwrigh25]

Shameless plug worked🤣. This is quality content

[@Subdubbin]

Haha thanks!

[@derekmorrison4239]

This case put me to work lol you most definitely made this look tons easier than it is 😂😭

[@AnNguyen-xt7bs]

i though the pump fan connector would be plugged into cpu fan header because i see an "CPU fan error" at 14:27

[@Subdubbin]

Pump is plugged into the AIO pump header. I turned the cpu fan monitoring off in the BIOS after the first start up.

[@user-oe1nt4pp8n]

All your fans are intake and you have no exhaust fan. This means that hot air can not displace properly and will recirculate causing higher temps and potentially thermal throttling. You can either point your side or bottom fans out.

[@apusista]

Absolutely beautiful thanks 😊 Self-explanatory, even to me! I just bought this case. Where I live, there is a LOT of dust though, so I would have to put the radiator vertically where you've put 2 140s, with the tubes at the top. Not ideal but no choice really then intake at bottom, exhaust on top.

[@Flyhigh471]

How does being in a more dusty place have an effect over wither to have the radiator on top or side ?

[@apusista]

@@Flyhigh471 Dust settles on upward facing surfaces... and then wouldn't it be sucked in? So therefore, shouldn't top fans push air out?

[@Flyhigh471]

@@apusista the build in this video using the top fans for the radiator in push configuration, so it wont suck the dust in, so you can do that. I just don't get why he opted to have five exhaust fans and only three intake fans, seems unoptimized to me.

[@apusista]

Broken Cypher : Yes, especially in a cool climate, more intake would be better. Here in India, more intake is not a good idea! 3 x 120 is good here. But you're dead right, push fans on top would be abs fine. I just realised my old pc has exactly that!

[@manspeej]

Instead of doing 5 exhaust and 3 intake like he did in the video try flipping the 2 fans on the side to intake so that you have 5 intake and 3 exhaust, if you have more exhaust than intake there'll be more dust inside the case

[@typerightseesight]

Do want.. but would switch the radiator around so the tubes hand by the side fans to help cool. and add a back fan!

[@elijahchua2674]

Love your videos. Your cable management is legit therapy. Please do a build in the SSUPD Meshlicious!!

[@Subdubbin]

Hint hint, there is a build in that coming up!

[@rajtirthadutta3938]

Great Forever with unique PC build ❤️❤️

[@amartin3893]

It's a fantastic looking PC. It could be one of those up market boutique builds! This question isn't criticism, but what is the thought behind your fan config? The 3 intakes at the bottom, and 3 exhausting at the top make perfect sense. The two fans beside the motherboard tray are also exhausting air out of the side panel. Wouldn't they serve better if mounted to take air in on the front of the case? I do understand they wouldn't have the same visual impact on the front as they do where you have them. But if that i9 starts to throttle moving them to the front may be a necessity.

[@Subdubbin]

I recommend running side 140mm fans as intakes. I ran them as exhausts for the aesthetics of the fans.

[@opax]

this is actually false because everyone knows more rgb means more frames. forget airflow, embrace rgb.

[@BurgerClown]

Love your channel. Have you thought of including a short text review of the case in terms of build quality plus ease of installation at the end of your builds? You seen to be a master of cable management so I would imagine you could weigh in on that area really well.

[@Subdubbin]

Thank you for the kind words! I have thought of that. Still new to all of this, and have been thinking about different directions to take future videos.

[@BurgerClown]

@@Subdubbin I think you definitely have a knack for making small form factor builds look fantastic if you're planning on doing any more builds within that area. Cable management is huge there too LMAO, but I'll definitely watch regardless. Hope your channel blows up.

[@VIVIRDELCUENTO555]

great assembly, you have been great. I have a question if I install a matx like that, you know if I would enter a corsair h150i of 360mm. thanks and a greeting

Why the lower fans are blowing down? Isnt it supposed to blow cold air to the case?

[@Subdubbin]

They aren't blowing down. They are intake.

@@Subdubbin Oh, you're right. Sorry, Im a noob 😋

[@markdavenportjr5129]

Very cool if amazon has the black version in stock next month I am getting that bad boy and converting it to matx. :)

[@brandow6584]

is the sky in one video

[@abbathgr]

You should go with custom length cables from the PSU and take out the extensions. Will make the back cleaner. Apart from that, it is great build!

[@4Muiz]

did you mount that side fans like that for aesthetics? coz they're gonna be pushing air out right? along with the top 3 fans, so you have 3 intake but 5 exhaust

[@svenhenkel3467]

Great Job...!!!

[@igreeny17]

nice build, thinking of the o11d mini for my next one. how big of difference in thermals did you see from side fans as intake vs. exhaust?

[@LadyWolvie82]

The only thing I would change is the fans on the side to intake. Having too many fans set as exhaust isn't good for the build.

[@daviniarobbins9298]

Just a personal opinion but I would have fitted the radiator the other way round so the tubes were on the right not the left.

[@ranilp7981]

a very nice build well done! 👍🏼👏🏼

[@Zombie101]

id go for 5 intake fans 3 extract for positive pressure but yeah!

[@loke2363]

I’m having issues with same motherboard and case, the aio bracket doesn’t fit on the back so I can’t screw the board in at a balanced level, did you run in to any problems?

[@ImranOO7]

Always looking for a good neat build to help me what to do and what to avoid and on this occasion, this helps me what to avoid doing. Nice but could have done a lot better at cable management

[@timothyandrepham7946]

Did you connect the two RGB Hubs on top of the Command Core each into one slot in the RGB side?

[@-karma-1761]

why not go for the NZXT N7 Z590 motherboard in white? or the Z490 in white? it would look so much cleaner

[@biggtribes2780]

Wait so to mount a 360mm radiator on top you just lower the ATX motherboard? I heard of fitment problems with the 360, but they sell a 3D printed bracket. I’m going vertical GPU mount 3080. Let me know if lowering the motherboard will work!

[@Trollgodmf]

should have gone with lian li unifans much less cables than corsair thats part of the reason why i got rid of them

[@TheOfficialFloridaMan]

I dont know what iteration case this is, but I cant find any O11 mini on google with only 3 gpu card slots

[@zqwc]

Now I was told that the O11 mini could not top mount a 360mm AIO but it clearly fits fine here... any reason why alot of places say you'll need zipties and stuff?

[@Subdubbin]

It fits here because the motherboard is micro-ATX. The 360mm rad doesn't fit with ATX motherboards.

[@neerajpant1682]

@@Subdubbin is it the same story with o11 air mini ?

[@IMdeadstone]

@Subdubbin great videos i like your content ! i'm planning to use the same PSU with a 3x8 pins GPU : Asus strix rtx 3080 ti oc, do you think i need an additional 8 pins cable ? from what i read corsair only gives 2 of them ? thanks again

[@natsumesight]

May i ask, why you put fans behind the case? Is that necessary?

[@labret2]

Ok yeah. I have 3070 Vision and I love it.

[@senseicheems3270]

How did u get a 3070 vision

[@halsten8330]

How come some people say a 360 aio cooler won’t fit in a Lian Lì 011 mini?

[@xprxmise7316]

This build prob cost about 4k+ due too gpu prices heck it might be even more expensive but it's so beautiful I'll tell u that

[@ChristopherMaldeis]

Have the LL120's been good fans for airflow and sound? Would you recommend them? Thanks!

[@franciscoruiz5053]

Fantastic pc brotha 👍

[@Subdubbin]

Thank you

[@MK-lc9fp]

Is it possible to do the push-pull aio configuration at the top?

[@audifivethousand7786]

What are the white tabs with letters that you’re adding to the RGB cables?

[@Subdubbin]

They're labels for where in the case each fan is

[@audifivethousand7786]

@@Subdubbin great tip!

[@Duy_Nguyen22]

mới ráp thì ngon lắm,mấy bữa úp đồ=))

[@mrobesemode]

Where’d you get your Y splitters?

[@remremremmy]

will the 3080 version of the gpu fit the case and mount like the 3070 one 🤔

[@1.itsML7]

17 دقيقة تقريبا شوي وانام وربي بطلع مونتاج عظيم

[@Liight_Studio]

Really good build 👍 Just hate Corsair for all those cables with the RGB fans + hub… Prefer the Lian Li’s solution with the AL120 or SL120

[@PapoitesAngola]

Great job! :D :D :D

[@zmezomix]

You bought a new mainboard, didnt you? Why did you go with the micro Atx version in black if you could have gotten the Atx version in White, for example the asrock z490 extreme in white. I think i would look gorgeous! Nice vid my man

[@Subdubbin]

I went micro atx so that I could fit a 360mm radiator on top. ATX doesn't allow you to do that.

[@itzzjkl65]

Can you use 120 mm in the spots in the back?

[@consistentapple2844]

Im getting a mid tower case would a micro atx be okay for it?

[@zeus_anoxia]

Can the O11 Mini hold a full size ATX power supply??

[@sp5die]

im sorry but if your gonna get a vision card and dont vertically mount it why did you get a vision card in the first place

[@Subdubbin]

See my vertical mount video :)

[@abdulrahmansamir6271]

@@Subdubbinحح ح كحح حك كح ح ح ح ح كك ح ح ح حححح ح حح حكحكحك ككحك كطحطححطحححح٠ححطططحطكطححطحح مع هد غدمدرمضان كريم

[@MetalJosh666]

what fan splitters are those?

[@Viktor_Kuznetsov.]

what is the name of the body

[@aboudnq]

case info please

[@ImSxpreme21]

Is it fine to have 6 intake 3 exhaust

[@johnvthvn]

what are the temps like in this case?

[@trllllon]

I thought the mini didn’t support 360 rads

[@shammirshamsuddin3090]

Want to ask bro. If matx board and i want to use vertical gpu setup, is it possible to get 360 rad at top and 3 fans at bottom ?

[@3csinapod195]

Hi, is there room for a capture card to fit with this build?

[@Stanislav7180]

Aio model and make ??

[@mateusztomana908]

Zajebista

[@jakobt7747]

Can u have atx normal size ?

[@gerrysantos724]

Nice build! One thing, though, that heavy GPU needs a bracket or something..

[@errorcode503]

Man, that looks good, I always love watching a build video from you. Also, what do you use for your main system? You have done multiple build videos in different cases and I'm just wondering. Have you used all the builds as the main system or do you have a go-to case and configuration that you use on your desk?

[@Subdubbin]

I use whatever is built at the moment. It changes a lot!

[@rezic605]

@@Subdubbin what do you do with the other pcs you dont use?

[@Subdubbin]

Take em apart and switch cases usually. Always buying and selling parts to try new things.

[@brianmiddleton09]

I’m so confused.. every video I’ve seen says this case won’t fit a 360mm AIO but you made it work??

[@Subdubbin]

Because this is a Micro ATX (m-atx) motherboard. Most people are putting ATX motherboards in this case which doesn't allow a 360mm rad to fit on top.

[@ZatchQQ]

the airflow is good?

[@sosaveso5811]

do you have any socials that i can dm you at i want to ask a question about my current build i have , i think i may need to upgrade but idk what to upgrade to

[@calebross4320]

What case did you use

[@rolandszirmai3922]

So happy that I find your video! Actually planning to build a very similar setup. Would you say that there is enough space for an elgato hd60 below the GPU? Thats my only concern :) Thanks heaps

[@itrynano2048]

2/10 needs more tweezers - The Verge but for real tho, that's a clean build, im a sucker for the dual chamber cases and i might need to pick one up for a full loop build... if i can get the gpu i want or they make a waterblock for my 6700xt

[@vice8493]

what's the song at 12:00 ?

[@joeldiramon]

will a full atx board fit here? thats my biggest concern been eyeing a smaller case. my midtower is too big

[@Subdubbin]

ATX motherboards fit yes. Check out my ATX build with a 280mm AIO in this case!

[@joeldiramon]

@@Subdubbin thank you! Godsend

[@joeldiramon]

@@Subdubbin how about full atx psus like EVGA GQ series?

[@ajthelwell6357]

Is it better to have more exhaust fans than intake?

[@LyK0sa]

Not really. He said in the description that having the side as exhaust looks nicer, but intake is recommended for performance

[@capone_rd_809]

rats nest for cable management and you can tell the GPU is sagging and you should of gone with a different AIO that does not require that weird white cable from the front.

[@kmoreno2845]

Are u using rgb splitter?

[@KobraTrading]

literally no idea how you managed all those cables. I stick with lian li fans specifically for that reason tbh. It's too much for me. You obviously have patience to be able to do it.

[@dungtranboncon9]

What is your computer case name? lian-li ?

[@randomshortsvideos2]

why 2x 500gb not 1x 1tb?

[@kcnandan6554]

which case is it

[@rlfizz4691]

What were those white cables you connected to the psu

[@Subdubbin]

Cablemod psu cable extensions

[@Johas97]

Hey what’s up, How much did you spend for build this case?

[@maceinmyeyes6915]

It’s $160 on newegg I believe

[@ryankeeling2406]

What are temps like with the set up of fans like this as I have similar build In mind

[@Subdubbin]

Temperatures and benchmarks are in the description! 30 minute stress test was 78° C.

[@ryankeeling2406]

@@Subdubbin that's pretty high ain't it

[@PyromancerRift]

Corsair : "Fuck you and your cable management !"

[@2Guestt]

what is the case called

[@medkitmemes8348]

Yo I’m building a pc In a few weeks and this pc is extremely close to the parts I will use to build my pc. Is it possible for you to tell me how much this pc costs?

[@ramigod1337]

what is this housing please name

[@fdjw88]

What's the name of the case?

[@paulchia912]

will a regular ATX fit with the 360 in this case?

[@Subdubbin]

Some guy makes an acrylic adapter named Grateful Glitters. Check him out. Or just use zip ties.

[@jesus2133]

How much is the total to build this pc?

[@little_light5157]

2235$