Subdubbin

Пікірлер

@zapdosmtr4961 14 сағат бұрын

Just rebuild my pc into the same case but im getting 3x 120mm slim fans for the bottom intake since my current fans are too close to my 4070s. just to be safe and move air a lot easier.

@roman2227 Күн бұрын

i could not get my PSU situated with the fan facing into the case until i watched this...running the power cable to the back of the case was genius. completely overlooked that option!

@anomalyfriend Күн бұрын

Show the other side of it coward

@anomalyfriend Күн бұрын

Maybe I missed it, but where did the PSU cable that plugs into the wall go? Seems to just disappear behind the back panel

@Subdubbin Күн бұрын

You can see it at 5:15

@anomalyfriend Күн бұрын

@@SubdubbinBut then you see you completely close it off at 8:57

@julianreynaa Күн бұрын

The case includes a 90 degree angled PSU extension that is routed through the side panel

@acrones 2 күн бұрын

The case is hot. There is no fan in the front and it does not draw air from the bottom.

@adammoultontravel Күн бұрын

He mounted 2 intake fans on the bottom

@jeremyocampo1529 3 күн бұрын

On amazon it states that I can use a 240mm AIO. If I wanted to use the AIO I'm better of getting an SFX or a short ATX PSU will fit? I already have an ATX PSU and don't feel like buying an SFX but if I have to for this case then I prob will. EDIT: I'm just gonna get the bigger version the Jonsbo D31, it can support a full size ATX and even a 360AIO but now I can buy a 280AIO and use my ATX PSU I already have. Great video!

@Subdubbin 3 күн бұрын

Thank you! Good luck with the build.

@aldessonmc 3 күн бұрын

The D41 support ATX but the D31 doesn't

@acloudonthebluestsky9687 3 күн бұрын

i prefer DanC4 than lianLiDan, the danC4 move gpu on top and i can have lovely air cooler xD but still classic nice itx

@andrs13 4 күн бұрын

is this the best airflow for this case? 🤔

@Hathal_98 4 күн бұрын

Beautiful

@niyazisahin70 4 күн бұрын

Excellent job and setup.

@Korben1981 5 күн бұрын

In this pc enough cpu-cooler plus back 120mm, try you will not loose of effectives!

@ecvent0r 5 күн бұрын

I hate that it seems to be acceptable to dangle the PSU on just two screws in these smallish form factor cases.

@Subdubbin 4 күн бұрын

At 10:30 there are 2 screws in the front that hold the PSU in as well

@Agidelis 5 күн бұрын

Look its a bird,no its plane ,no its a superman, nooo its a microwave jonsbo 🎉🎉🎉

@oakleytrue2414 5 күн бұрын

look expensive how much was the build?

@x0vg5hs1 5 күн бұрын

I did install the 40% darkening foil for car windows. it gives good vibes.

@lasershow40 6 күн бұрын

Cpu fan config??

@lordprohibit-3832 6 күн бұрын

Did the case come with the screws for the mother board?

@crentepoliglota 6 күн бұрын

The case or motherboard manufacturer always provides extra screws/standoffs, don’t worry!

@Subdubbin 6 күн бұрын

@@lordprohibit-3832 yes it did

@Dullydoes 6 күн бұрын

I love when cases use the space efficiently! great build!

@FalconArena 6 күн бұрын

Positive pressure with exhaust on top? hmmm interesting.

@andrs13 4 күн бұрын

Is his fan setup good or bad? It seems like a positive pressure setup, but after I tried it out, the temperature didn't seem to change.

@sc337 3 күн бұрын

Air intake from the bottom and rear. So the tower cooler fans have to be orientated accordingly. PSU sucks air from the front and exhaust to the top. Almost all exhaust are focused on top and some might leaked to the front. Really interesting

@dafnwagers5737 6 күн бұрын

Clean but u only needed white motherboard to go all white clean btw

@chris__white93 7 күн бұрын

Clean as always!

@SoundFisher 7 күн бұрын

That's a very clean build brother. 🍻

@acloudonthebluestsky9687 9 күн бұрын

freaking godtier cable management Can I ask why the exhaust fan at bottom??

@gabruiz8456 9 күн бұрын

i struggle with cable management in this case !!

@CyantoYT 10 күн бұрын

TYSM. This helped a lot with my build!

@F........................... 11 күн бұрын

I prefer to install 140mm at the front so that more cool air comes in, AIO installed in push pull at the top and also a 140mm fan at the back. Since I have a 4090, it's more important to me to get a lot of fresh air because the CPU isn't put under much strain when I play at 4k anyway. When I play I never get above 50 degrees and I use maximum settings every time I play.

@luismiguelsantosgonzalez7782 11 күн бұрын

Interesante, me lo encontre de casualidad, no sabia de la existencia de estos cajones, saludos desde Venezuela.

@MisterSoul2008 12 күн бұрын

😵👀

@gianvillanueva2496 13 күн бұрын

What were the cables that was placed under the motherboard?

@eajayy8969 16 күн бұрын

this guys cable management is art

@christosmak.6741 17 күн бұрын

I am going to rebuild from scratch to get the cable management right!

@dxvdxnd 18 күн бұрын

So this board will fit my MSI b760-p motherboard? I see that this board offers e-atx and I have an atx board rn that I have and want to know if I can use this case

@nishanthdass4172 21 күн бұрын

Yoo! Love the new builds!

@Subdubbin 21 күн бұрын

@@nishanthdass4172 Yo Nish! Thanks man!

@oakleytrue2414 22 күн бұрын

How much did the system cost to build?

@JOTAVECE94 23 күн бұрын

The cable management work you have done on this build is damn insane!! Beautiful work

@mp23061 23 күн бұрын

Just got the case, excited to build in it!!

@birdvision. 24 күн бұрын

inSANE BUILD

@eugenethompson 27 күн бұрын

Nice build! The cable management is crazy good! Thanks!

@JF300K 27 күн бұрын

Top Cable management..

@DanielFilipiuk Ай бұрын

better than pron

@MK-mj6zw Ай бұрын

Great video. Why the inner fans on the rad? I assume without them there is more space for the hot air to move and to get pulled out through top fans. With that you are blocking that and you are likely to increase gpu temp bc air cannot flow. Correct me and if you tested different scenarios please enlighten me. (Noise & thermals)

@BirkinIdk Ай бұрын

I think this just sold it for me, this is the case I'm going with. I've always wanted to do a Mini-ITX build but could never justify the cost of buying essentially all new components. Now all my stuff is so outdated, I'm looking to buy all new stuff anyways so I might as well finally do an ITX build!

@tsz8964 Ай бұрын

Thanks

@Lennierru Ай бұрын

Lian li for some reason thinks that dust does not exist

@TsZen876 Ай бұрын

Untrue. Class leading thermal performance, it’s a trade off and I haven’t seen any reviews complaining too much about dust build up. Obviously they don’t use the case for super long but they also have a pretty good idea of what cases draw in a tonne of dust.

@anlagrdr5229 2 күн бұрын

Its positive pressure case so dust should be less of an issue.

@NuGUNDAM1014 Ай бұрын

RTFM

@hiro6899 Ай бұрын

配線が素晴らしい！とても参考になります😍

@guridosul2323 Ай бұрын

este gabinete comporta um aio no topo de 240mm?

@normified Ай бұрын

Only complaint with this case is the rear lower intake (where the PSU normally exhausts) isn't a fine mesh and won't filter anything, but that's my ONLY issue with it, which is more than 99% of cases, so you bet your ass I'm just gonna get some PVC mesh and make my own filter when I finally get around to buying this beauty

@jerrychen21 Ай бұрын

Appreciate your epic video, I am going to built mine in a few days, hope everything goes well 😂

@grahamgrantme 2 ай бұрын

i cried a little on the bended radiator fins

Ең жақсы KZbin

Пікірлер