OBDSTAR DC706 Clone RFHUB Security Module from Dodge, Jeep, Chrysler, Fiat, EASY!

BUY IT HERE!:
globalcommerce...
Thanks to all those that have donated to the Channel! Members area link! More tools will be added daily! Check back often! email me for list! [e-mail]
drive.google.c...
Support this channel for the best automotive secrets on the internet! A Donation of $25+ gets you full access to the members area!
Please send donations to the channel here:
Cashapp donations $GCDT
Zelle [e-mail]
Venmo @Louis-Roberts-26
PayPal [e-mail]

[@globalcommerce7654]

BUY IT HERE!: globalcommerceca.com/ Thanks to all those that have donated to the Channel! Members area link! More tools will be added daily! Check back often! email me for list! [e-mail] drive.google.com/drive/folders/1NdWmuM8UnU35dpULy9sWXWvPXQnYd6PC?usp=sharing Support this channel for the best automotive secrets on the internet! A Donation of $25+ gets you full access to the members area! Please send donations to the channel here: Cashapp donations $GCDT Zelle [e-mail] Venmo @Louis-Roberts-26 PayPal [e-mail]

[@diagnosticosh5358]

Saludos muy buen video gracias por compartir 🎉

[@ATSNorthernMI]

I wish I could get my hands on this. It will help me build a business and get me out of working low wage barely scraping by job. Some issues I see with this are people that don't measure the CAN bus to see if the device they are cloning is at the end of the line. Some modules have the terminating resistor in place and by measuring the CAN lines on the module and see that it has a resistance of 120 ohms needs to only flip one switch to bring that value down to 60. Some modules don't have the resistors in place and require you to provide them by flipping both switches.

[@daviesmwitwa8247]

❤❤ great work

[@philh9238]

I see some cha Ching I can make using this tool for a few shops I do programming for

[@globalcommerce7654]

Phil H always thinking on another level 😎

[@Slo_poke300]

Question will the vin read on the rf hub when a scan tool connects? I’ve used other tools and ran into the vin showing all 00000s

[@JoseMartinez-qf1zi]

I saw people on Facebook group saying the got the device banned traying to clone RFHUB

[@globalcommerce7654]

What device got banned? And "banned" from what exactly?

[@8power0]

SOON TO BUY MY OBDSTAR DC706 FROM YOUR SITE SO I CAN BE A SHORED I WILL BE GETTING THE BEST ASSISTANTS ,,,,,,,,,,,,, JUST CURIOUS IS IT POSSIBLE FOR ME TO BE ABLE TO CLONE A HYUNDAI IMMO SMARTRA MODULE THANKS AND LOOKING FORWARD TO YOUR REPLY AGAIN ???

[@philh9238]

Pretty sweet tool. Looks autel based.

[@globalcommerce7654]

Thanks, not autel based though

[@mattlebrun6601]

at 2 min 36 sec you chose dodge instead of chrysler. all the numbers look the same did it matter at what you chose dodge or chrysler? thanks

[@mattlebrun6601]

also can you explain why you have the resistors on vs when they need to be off.

[@David-rm2zd]

Just tried the tool for the first time on a RFH but I keep getting security check failed. It gets to 20% and stops. Any experience with this?

[@globalcommerce7654]

Most likely you skipped a step in this video, watch it very carefully...

[@David-rm2zd]

@globalcommerce7654 Rechecked everything. Possibly a bad rf hub?

[@globalcommerce7654]

@@David-rm2zd if everything is connected well leave ip004 disconnected from dc706 for 15m and then connect and try again

[@philh9238]

Is the tool subscription based? Yearly cost??

[@globalcommerce7654]

Subscription based, it will run without a subscription just no updates.. $249 if your subscription expired, cheaper if renew before expiration.

[@yaboi5686]

Not bad 💯

[@MysteryMan245]

Can This Be Used for dodge bcm

[@globalcommerce7654]

Dodge jeep or chrysler check supported list of devices on our website globalcommerceca.com