ODI Tamer Cams for '23+ KTM TBI

Рет қаралды 3,467

Күн бұрын

Пікірлер: 18

@timmartin370 3 ай бұрын

Nice informative way of explaining how the device "tames" the throttle. It's most helpful for coming off idle when the throttle feels most "snatchy" when trying to hold a low RPM.

@slaverace1 3 ай бұрын

Glad you liked it

@rehepeks 3 ай бұрын

My 24 300EXC came from dealer with the agressive cam installed but a smaller diameter cam was provided together with the bike. Same was with my 18 Husqvarna FE350 when I bought that years ago.

@assaftennenbaum6751 3 ай бұрын

These come stock with alignment marks. You can clearly see them in the video at the 7 o'clock position

@mototrailz 3 ай бұрын

I was about to comment the same thing...odi thought about it. you can't go wrong

@knobbysidedown4258 3 ай бұрын

What cam (letter) are you referring to from the odi grip set?

@gregharris2928 2 ай бұрын

When I put a Vortex ECU (set to map 1) in my 24 XWF 350, my throttle became way too sensitive and I couldn’t control all that intense power for tight single track riding. I don’t want to switch to map 2 (less explosive power) Therefore, my only fix is to switch to the tamer cam correct? Thanks Jeff for sharing your knowledge with us. Happy Trails Y’all!

@slaverace1 2 ай бұрын

Hello: Yes, a throttle tamer will help BUT why not just switch maps? Just takes a minute.

@gregharris2928 2 ай бұрын

@@slaverace1Thanks Jeff. I will try Map 2 ASAP and test it out before the Snow flies up in Teller Co. Thanks for answering my question.

@justinmeyer77 3 ай бұрын

Will these work on the new small TBI bikes like a TC150?

@slaverace1 3 ай бұрын

Yes

@justinmeyer77 3 ай бұрын

@@slaverace1 Do you happen to know the model on the cam you're recommending? (Cam A, Cam S2, etc...). Thanks!

@evr-mr3cp 3 ай бұрын

If I purchased a set of the odi grips would this work on my 23 Sherco 300sef? BTW, the Sherco does not come from the factory with a push cable, only pull. Keep up the good work Jeff.