Odyssey Last flight - SOLD 16s 6kW 294km/h 10kg JETFAN-120 PRO Graphene battery, TOPRC Jet Sound

Odyssey TOPRC Model 2,3m takeoff weight 10kg
bigplanes.nl
max power on 16s, ca 107 Amps ca. 6kW - ca. 10kg of thrust,
open duct air intake,
exchaust nozzle dia. 114mm
Top speed level flihgt 218km/h, with little diving ca 294km/h
Stall speed ca 40km/h
JETFAN-120 PRO with motor HET 800-83-510kv
www.turbines-rc.com/en/50-56m...
ESC ZTW Mantis 150A HV 12s (max 16s, 200A)
www.turbines-rc.com/en/50a-an...
BEC HobbyWing 25A 18s
rc-innovations.es/shop/hobbyw...
batteries Graphene, 16s 4000mAh 65C, total battery weight ca 1600g.
www.kostkamodelcentrum.cz/obc...
Servos 21g 10.5kg KingMax KM1203MD run on 8.6V
www.kostkamodelcentrum.cz/obc...
Landing gear JP-Hobby ER120 for Sebart Avanti XS
www.turbines-rc.com/en/struts...
Amp sensor UniSens-E 280 Amp www.sm-modellbau.de/UniSens-E
GPS sensor GPS-Logger 3 www.sm-modellbau.de/GPS-Logge...
Transmitter FrSky Horus X10 Express on Open TX firmware.
Receiver FrSky Archer SR10 PRO with stabilisation and full telemetry (amps, mAh, volts, temp, km/h)
#namaxa_media
#WojtekBrzozowski
#EDFjetRC

[@paulcarruthers1314]

Looking forward to see what you replace this with, I hope you will share it on here as a project video.

[@quantomica]

Will like to see more big EDF projects. Lots of RC clubs in metro areas do not allow turbines - so your channel is a great resource for those who wants to experience big jets without burning Jet-A.

[@deadstickduck2025]

Using Li-Ion on a dozen EDF and can't go back to LiPo that's double the price, for half the flight-time. Looking forward to your next monster. Thank you for the sound!

[@0688tc]

Loved seeing every setup done on this one, as well as every fun an almost always, Fast as ****flight! I'm sure the next will be as fun, thanks for sharing!

[@stevenvater8720]

Sound better than a full size jet!!

[@bumblebeehead1]

Thrilling flight's to watch. I look forward to whatever is next!

[@gooniac33]

Wow it sounds and flies incredible!!! Its over 180mph!!! Thats plenty fast!!!

[@fern6978]

The sound is incredible! 🤤

[@tylerpalmer8973]

It's a beautiful model. I'm tempted to get one but I have to fly my Black Horse 2M Viper first.

[@danielburke6536]

Such an impressive jet, the slow and fast flight is incredible

[@nighthawk0077]

One of the best "value" jets. Top EDF!

[@ninjor8415]

Do you have any videos showing how you have your FrSky Archer SR10 PRO setup? Do you have backup batteries plugged into it? Im wanting to switch from spektrum to frsky and am curriose how they wire up with the extra batteries. Awesome video thanks!

[@jetpathar]

Congrats for all these flights and different setups on this Odyssey, very impressive, and now curious to see what will be the next one... or will you go back to the Viper with the new Lion batteries...

[@DJI_Silesia]

Miałem okazję w Mikołowie widzieć Twojego Avanti, już to maleństwo robiło wrażenie, a co dopiero ten :D

[@Condor060]

Question, if you had to do it over again, would you put the 120 JETFAN in the Black Horse Viper? I ask because I just bought the Viper and your videos from 2 years ago on the Viper were so great, I just had to replicate what you did. Amazing job brother.

[@bestcoubtv7422]

Nice setup. Congratulations Wojtek! What plane is next? Or it will be surprise for us?

[@rcalbuquerque1]

Thank you for doing all the hard work on this incredible project. Now it will easy for me to build one. What’s next?

[@simonjandrell5897]

a mind blowing noise

[@rcalbuquerque1]

I’m interested how you were able to get all the controls mounted inside the wing perhaps you can share that information with us.

[@blacksheeprcmodelers959]

Wojtek!! which Odyssey setup was your favorite?

[@jelleeee19]

What is the reason you used naca ducts on top and square cut outs in the bottom of the fuselage? Why not also naca ducts on the bottom for less drag?

[@kinzokushirogane1594]

Do you have any plans to build a smaller but faster jet? To get closer to 400-500km/h

[@nonoleptitrobot007]

Did you use a sound system to have this sound ? Because I finish right now a fouga in 15S 120mm Jphobby. And I wondering if it will be so impressive...

[@EDFjetRC]

It is all about precise ballancing of edf and allso a big enough distance between rotor and stator in edf :)

[@Turboy65]

Last flight...I was expecting a crash. Really. That seems to be very common with RC aircraft. I bet 10 hours flight time is well above the average before crashing.

[@rcalbuquerque1]

I’m confused…why would you sell something you seem to really enjoy? After seeing your videos I want one desperately.

[@MrKenwillis]

How much did you sell it for?

[@EDFjetRC]

cost price for parts and jet

[@uabtetriukas4390]

@@EDFjetRC And how much is that?