OH NO! MY CHEETAH WONT WORK! HOW I FIXED IT- RC MUSTSEE

[@CCxRC]

Great video Scott. Glad to see you were able to get it sorted out. Thanks for the shoutout at the end.

[@DavidE-tj4rc]

I am looking at getting a Cheetah. I bet a dab of hi temp silicone would do the trick on the gap by the back of the motor. Once it has cured the silicone would prevent debris from entering yet is flexible enough to remove by peeling off. You may want to scuff the surface if it is very smooth. Thanks for your video and I think you have helped me make up my mind!

[@rcmustsee437]

not a bad idea however the gap is bigger than it looks. the tape method is just downright easy. thanks for watching!

[@3949zxcvbnm]

You can see at 4:50 You bent your drive axle with the spur gear moving left to right.

[@rcmustsee437]

perhaps, but it hasn't affected the truck at all.

[@anthonydeleon4104]

Ohh if u can try reviewing the cheetah on the proline badlands mx28 on various terrains, keep up the good vids!

[@baztudd]

Just bought one so these vids are great for when I brake mine thanx

[@rcmustsee437]

yea man! do yourself a favor and order a bunch of replacement parts early so you have them when you need them!

[@Piroqu93]

Great video, I see that you replace one of steering arm, can u provide name or link?

[@TonysRcTechboom]

Fantastic vid brother yet again. 🤘👍👊🤘👍👊

[@joshuaeastman806]

Can u get a mesh cover for that stuff like the bison has

[@anthonydeleon4104]

INice vid very informative, thanks.

[@fabienghys]

Hi mate, how do you plug the extra fan? I have no slot available to plug it!

[@jasonarthurs2514]

hey good day i need help plz,. i have a JLB cheetah... I had all plans to run it yesterday but i was out of luck... i have steering but no throttle.... so i said let me calibrate it. but whenever i hold down the set button and turn it on it doesn't go into calibrate mode. it just turn on like normal

[@passat731]

Hi! please give me link to the double fan for motor

[@alextenerife1008]

Nice vid on maintenance, however, I noticed that the motor heat sink had a couple of fans attached, is this something you designed yourself or a part that can be bought?

[@rcmustsee437]

that is an Integy traxxas slash 4x4 twin fan. can find it on a-main probably.

[@colegrue4987]

Link for dual cooling fan?

[@derekquinones8614]

Did you have to do anything specific when hooking up that integy heatsink fan? I'm gonna order the same one is why I'm asking you think that fan will do me fine ?

[@rcmustsee437]

no it snapped right on, no problem. plugs into the receiver. very simple.

[@TonysRcTechboom]

Oh I've joined the group 👍🤘👊

[@TheTeambello]

i cracked my frame the first day hitting a curb. where can I get another frame?

[@rcmustsee437]

the same place you probably got the car. gearbest.com or bangood.com

[@winstonbanks1057]

My 4 wheel drive ain’t working I’ve subscribed

[@weswes1294]

Soo I got my cheetah in Christmas and it's my first rc car. Two days ago I was riding it and it just stopped. So I turned it off and on and it went for about 2 seconds and stopped again. It won't even steer or move at all. Every time I turn it off and on it only drives for about 2-3 seconds. When I turn the wheel sometimes the lights go dim even though the car doesn't move at all. If any one could tell me what's wrong with it I'd appreciate it because I don't know much about rc cars at all... thanks!

[@rcmustsee437]

1st, don't ride your rc car! haha jk. sounds like the battery died. the truck wont let it run down to 0% battery because that destroys lipo batts. it will only last about 20 min of use. immediately recharge if it is not hot and try again.

[@weswes1294]

rc mustsee but I was using a charged battery

[@rcmustsee437]

Wesley Boyett ok, check all the connections and if that dies not work call the manufacturer

[@weswes1294]

rc mustsee ok cool. I should've got something simpler for my first rc car.

[@niceboy60]

Before replacing the servo there's a quick test you can make on your receiver unplug Channel 1 wire which is the servo steering channel if the car accelerates normal with no issues and with no lights blinking , you would know it was the steering servo which was causing the issue . JLB Cheetah ESC is waterproof and has high voltage protection the Receiver is also Waterproof The Steering Servo is not even in dump proof and will cause the system to fail if not replaced