Oil Change - Volvo Penta Marine Diesel Kad42 Kad43 Kad44 Kad300

[@andersnygren9939]

Great , please have more videos like this. Changing oil in Compressor. Replacing Turbo etc

[@joeabc1704]

Great videos, have helped alot Just a bit of feedback, I've just done this, and the oil extractor tube can only go down far enough to extract 7 to 8 litres on my KAD43 engine. The depth I can insert the extraction tube is only 1 to 2cm longer than the dipstick before it bottoms, and doesn't get to the lowest point of sump. After speaking to a local marine engineer he says it's not unusual and they simply replace whatever oil they can recover (sometimes only 50% of sump capacity) This doesn't sit well with me, but not sure what is to be done?

[@bobmclane3017]

Awesome! Also some winterising tips would be great...

[@Oggiwara1]

Thanks for sharing. Very useful for me that never had a Volvo Penta KAD engine before. Are you planning a video on how to check and change gear oil and stern drive/outdrive oil?

[@nasseral-momen1463]

Hi, doesnt the kad44 take 11 litres of oil ? just wondering as i only seem to find those pumps in 7litre capacity

[@fischerpric39]

I think so, same with my KAD42. I found a 15L one from a company called EWK or you can fill it, dump it and go back for the last few litres of oil.

[@dellyet]

Good idea with plastic bag 👍

[@ultimatejay]

That oil extractor will not extract all the oil. The tube is not long enough to get all the way down to the bottom of the oil pan. Ask me how I know........ That engine takes 12 qts of oil and you only extracted 6qts. You would have to fill that container up two times.