Oil Pan Install | Honda S2000

[@nsrracing1]

Nice work I just did this today, but just one question. On the 2 lower transmission bolts you stated 47 but in the the diagram in the manual shows five bolts. Two 10x1.25mm @33 (which i belive are the 2 removed lowers)and three others facing opposite direction @ 47 which is 12x1.25mm. Am I reading the diagram wrong?

[@DIYGuysvideo]

You are absolutely correct. Will pin this and make a note.

[@nsrracing1]

@@DIYGuysvideo 😊 Thanks

[@themikepotter]

Great tutorial! Thank you for supporting the s2k community.

[@edwardmendez2393]

Man this is the best S2000 DIY channel

[@joshuatoro9770]

Hey there, I'm building a long block. Stuck on the which baffle to use. Which one is this one? Any good?

[@koo08]

damn is that supertech Oil!

[@shawoo]

Does the oil dipstick come in under the baffle?

[@kumingo]

Thanks!

[@proraceer07]

Great video, what oil pan did you go with?

[@mfactorypatrick145]

It looks like a Toda

[@DIYGuysvideo]

Yep it’s a Toda pan. Not really satisfied with the initial results

[@mfactorypatrick145]

@@DIYGuysvideo still a fair bit of pressure drop observed? Perhaps a Moroso with trap doors would be more ideal?

[@proraceer07]

@@DIYGuysvideo oh no, makes me not want to install mine. Please keep us posted.

[@DIYGuysvideo]

Yeah I still see oil pressure is quite variable. Seeing oil pressure drops of 12 psi in corners.

[@DoWutNow]

🙏👍

[@RedM3]

Why didn’t you go with the Spoon Sports Baffle Oil Pan?

[@DIYGuysvideo]

It’s more expensive for the same baffling design. I was particularly interested in the Toda pan because it comes with an additional port for a temp sensor.

[@mushy18100]

@@DIYGuysvideothanks for that info.

[@amunsaf]

what pan did you install?

[@DIYGuysvideo]

Toda

[@sgrant502]

Whats your wheel and tire set up?

[@DIYGuysvideo]

17x10 +50 Rota Grids. I run a mix of A052, RT660, and Maxxis RC-1

[@JamesCreamerIII]

@@DIYGuysvideo did you run the RT660s prior to installing the baffled pan?

[@garkillack-7265]

YO MAN, just put my oil pan on and filled it with oil when I realize one of the dowel pins came out with my old oil pan and I didn’t notice… something gonna fuck up? or you think I’m chilling?

[@DIYGuysvideo]

I think you’re chillin.

[@DIYGuysvideo]

I imagine they are for alignment purposes during assembly. If you have a gasket set and the bolts installed the pan isn’t going to budge imo.

[@BanHenSlime]

what track is that at the end?

[@DIYGuysvideo]

Thunderhill East