Oil Pan Removal | Honda S2000

Hi everyone! Today I’m going to show you how to remove the oil pan on a Honda S2000.
Follow me on Instagram for more Honda S2000 content: / diyguystv
Please consider using the links below to purchase tools in order to support my work.
Tools/Parts necessary:
- 14mm wrench
- 10mm, 14mm socket, 17mm (shallow): amzn.to/3JiyxUH
- 3/8" Torque Wrench: amzn.to/3cTrFh2 (can also use 1/2")
- Hydraulic Jack
- 3/8" or 1/2" extension: amzn.to/3q7aoJ4
- Large Flathead Screwdriver
- Oil Drain Pan
Optional:
3/8" Cordless Ratchet: amzn.to/3iw0w50
1/2" Cordless Impact Gun: amzn.to/3mPcNFf

[@CaptainFalcon92]

Hi ! Happy hearing from you again. Your guides are what i first look at before most of my attempt at working on my s2000. Thank you for scouting the car for us. I went further with complete four brake calipers disassembly and refurbishment, complete seat take-down and seat pan paint, trunk bottom rust repair, brake lines... your content always helped me somehow to get started with confidence and information.

[@kbj8594]

Glad youre still making videos! Youve helped me out tremendously over the years! I appreciate it!

[@DatNinjaGuyD]

A great method to gain more leverage is to add more wrenches to the end of the open side wrench.

[@Rob.Coleman]

Thank you for another first class tutorial 👍👍

[@themikepotter]

Awesome video, as always!

[@PenguinScotty]

Great vid as always! Sad to see your results on the TODA baffles, you going to try something else by chance?

[@gurjitrandhawa5944]

what happen ?

[@BattleRaT_CL]

Thank for the video man!!! Hey, super curious now. What's that weird drain plug you removed at the beginning? looks like some kind of custom sensor o_O

[@Motornepile]

Svaka cast majstore veliki pozdrav..

[@kumingo]

Thanks! Perfect timing. I want to do banjo bolts. How’s your cr doing ?

[@DIYGuysvideo]

Banjo bolt video will come in a a couple weeks probably. This video is preparatory work. CR is doing great!

[@jaymariano2477]

Can you make a video on replace engine ground ?

[@DIYGuysvideo]

Probably not sorry.

[@MacThreinfhir]

About how long does this take? Just looking for an estimate/approximation. Thank you.

[@DIYGuysvideo]

Removal about 30 mins to an hour depending on your skill level

[@saladasSTi]

Wait only 2 bracket bolts? What about the ones connected to the pan

[@DIYGuysvideo]

AC bracket comes off with the pan. Easiest way to do it

[@DoWutNow]

Oil cap remover tool is clutch..

[@gurjitrandhawa5944]

why was this done ?

[@matt260]

joking or trolling? literally says why in the first few seconds..

[@gurjitrandhawa5944]

@@matt260 not trolling , he said typically done for baffle/banjo but his driving is far from typical and his car is very high mileage.

[@Illness.og.]

Like!