i always wanted to work alone fixing my own motorcycle although have watched so many videos out there but this one is in detail and high resolution never thought that there lot more thing havn’t seen yet things for this one sir. you deserve a sub.
@MyINNOVAMotorcycling4 жыл бұрын
Thank you very much my friend!!!
@charlieangkor86494 жыл бұрын
perfect analysis especially the double sided video of the gearshift clicking
@MyINNOVAMotorcycling4 жыл бұрын
Thank you very much for the compliments. As a hobby, I enjoyed repairing my motorcycle. Anyone who plans to do it himself must know that the repair requires a lot of work. In order to reach the bearings almost all engine parts have to be dismantled, which is dozens if not hundreds of parts (depending on the type of motorcycle), and then put everything back in exactly the same position, otherwise the engine will not work.
@Tylskiu_pranik4 жыл бұрын
Полезный контент)))
@arifgill41893 жыл бұрын
Good
@kyawlinaung14394 жыл бұрын
Thanks for sharing bro.This video is better than going to honda service.
@MyINNOVAMotorcycling4 жыл бұрын
Thanks for the compliments! If you have no idea about mechanics or you are a beginner amateur mechanic, it will be very difficult for you to finish complicated repair job successfully, and then in any case you may find yourself coming to the professional honda service garage.If you don't have proper training in mechanics it can also be very dangerous to the point of death. I learned to respect garages and not to disrespect them, they helped me when I had a problem. Paid help of course, It's their livelihood.
@kyawlinaung14394 жыл бұрын
I don't mean to disrespect them the reason I don't want to go to the service is that last month I go for front shock absorber seal renew but after service it is not working as I expected and they tensioned too much on the back drive chain and Later I have changed my new drive chain because of too much tension and because of too much noise.In my country Myanmar the honda service dealer don't have talented mechanics.So I watch your videos and everything is well working.
@MyINNOVAMotorcycling4 жыл бұрын
My dear friend, it is always possible that you will meet in the garage a mechanic with less experience, it can happen in any garage, it can happen to you too, you will finish work and find out that you are destroy instead of repaired. Mechanics mans are human beings, humans make mistakes. The right way to maintenance a motorcycle is to get to the garage at regular interval time. If you personally a good mechanic skilled, and you're a motorcycle mechanics fan like me, this is another story. The mechanics hobby is a lovely hobby, under the condition of an amateur whith recognizes his risks and limitations. I am happy for you that my videos have helped you, and that you end successfully completed the necessary repairs.
@Tylskiu_pranik4 жыл бұрын
Два сцепления для плавности переключения коробки передач?
@MyINNOVAMotorcycling4 жыл бұрын
Два с половиной. Центробежное сцепление, стандартное сцепление И это «лишняя половина»: kzbin.info/www/bejne/in6cXp9perqFrKc
@Edvilla-lg7op4 жыл бұрын
Ser good evning po! Tanong ko sana kasi ginawa ko yong motor na honda wave 125 nag palit lang ako ng clucth shoe ass. Pag balik ko na lahat hind na po gumagana ang kick starter. Ty.
@MyINNOVAMotorcycling4 жыл бұрын
Does the electric starter work? If the electric starter does not work try pushing, push the motorcycle and then stepping in the first gear, does it work? If the engine starts with one of these options, it indicates that you have broken or worn parts in the kickstarter. In any case, you should go to a licensed mechanic, dealing with the kickstarterr can be dangerous, you can brok your leg, and can be injured in other ways.
anong tawag sa part ng crankcase kung saan nandun yung drain hole ng langis? hinahanap ko kasi sa google saka sa shoppe. ibat-ibang parts ng crankcase yung lumilitaw sa search. salamat.. new subscriber here
@MyINNOVAMotorcycling3 жыл бұрын
Hi, the crankshaft can be purchased as part of a complete and new set. You can also buy a used crankshaft set and disassemble from it the parts you need. The Con-Rod kit (The big hand) you can be purchased separately. The Con-Rod kit [06381-KPH-900] comes with its bearing and penis . The penis has holes for the oil to flow, so it needs to be installed at a very specific angle. kzbin.info/www/bejne/jWOsl6moaJ11n80
@MyINNOVAMotorcycling3 жыл бұрын
Sorry, translation interruption? Maybe you meant that part? 11133KPH900 JET, OIL, 0.8MM bikerzbits.com/genuine-honda-spare-part-11133-kph-900.html
@charlieangkor86494 жыл бұрын
The lazy not smart not very competent and dishonest (excuses excuses excuses) mechanics in the Honda dealers cannot solve my problem with unreliable gearshift, so I have to study it myself from the videos. I dont even have a place to disassemble it myself.
@MyINNOVAMotorcycling4 жыл бұрын
I understand you, I used to think like you, until I became an amateur motorcycle mechanic and experienced what it was like to be a mechanic. Don't rush to blame the professional mechanic who just wants to make a living. A mechanic makes a little money from a general engine overhaul, a lot of work, a lot of spare parts to replace. That is why the repair is expensive. When the engine breaks down significantly, it is usually better to sell it for spare parts. The mechanic who buys a motorcycle for spare parts(at a little mony) can sometimes decide to renovate it, and then he manages to make money from the motorcycle repair. That's how garages make a living.