√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@mzyjcphtblessed56482 жыл бұрын
Is this dangerous like do I need to change it asap
@longshotdiedtired1582 Жыл бұрын
This videos tells me all I need to know , definitely putting my van in the shop I’m a diy guy but this seems a little much
@robertscotney56754 жыл бұрын
Great informative video but them shoes can be cleaned with brake cleaner well, let to dry then place them back on ...it works & saves 1 some money !
@VIVA_MEXICO1004 жыл бұрын
Awesome video always wondered how this was done.
@pirihern93294 жыл бұрын
Made it look easy. Not bad if you know what you're doing.
@1AAuto4 жыл бұрын
And even if you don't Piri, that is what the videos are for!
@brandongoesphotoxvideo2 жыл бұрын
Great video with perfect visuals. At the risk of sounding unknowledgeable, are axle seals and wheel bearing seals the same thing in this instance?I've seen the seal between a driveshaft and transmission referred to as an axle seal as well
@randyfields5633 жыл бұрын
I have the identical problem with my Suzuki xl-7...thanks for the great presentation.
@pjvasquez2003 Жыл бұрын
Great job. Easy to follow. Step by step
@NML753 жыл бұрын
Damn I need this done asap
@SilverBullet93GT3 жыл бұрын
Love the signature ziptie with safety green tape end :)
@mcmpr75344 жыл бұрын
Excellent custom thumbnails👌and good job
@1AAuto4 жыл бұрын
Thank you Sir!
@CobraR1993 Жыл бұрын
If you're this far into it just replace both bearings and seals. New bearings and seals is about $25. Just rent a bearing puller from the auto parts store. Also, refill with Amsoil severe gear oil. Its the best.
@kobyphillipson51084 жыл бұрын
This was very use full thank you
@1AAuto4 жыл бұрын
+Koby Phillipson Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@RickDaGoat892 жыл бұрын
You make this look so easy. Lord know if I tried to do this everything would go wrong. I guess I will just go to the shop and get charged a arm and a leg wish me luck guys 😭
@chaeltheamericanmurderersi84502 жыл бұрын
How’d it go? Did your issue get solved or was there another reason for the oil leakage?
@rossbowman2024 жыл бұрын
Thank you Len.
@joehumeas71963 жыл бұрын
What grease is on the axle seal? My new seal is leaking on the drivers side of my 2008 Civic. I removed and reinstalled once already but maybe I need to add grease to it.
@momoreno9443 жыл бұрын
Unless I missed it, never did mention what year, type, model of vehicle...would have help video.
@grantw.whitwam99484 жыл бұрын
You are the man, made it look easy. (I know it's not)
@1AAuto4 жыл бұрын
+Grant W. Whitwam Thanks for checking us out! 1AAuto.com
@bigman4175 Жыл бұрын
Are you able to turn the drive shaft like he was if you don’t have the car off the ground (just the back jacked for ex.)? Also what did he put on the seal when putting it in?
@mulehead36974 жыл бұрын
Great video.
@1AAuto4 жыл бұрын
Thank you for your kind words Adam!
@tomboytomgirl53563 жыл бұрын
Love your videos buddy. You're good. Thanks so much!
@1AAuto3 жыл бұрын
+tomboy tomgirl Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@0_0-t6p3 жыл бұрын
Good job
@abisismael13434 жыл бұрын
Thanks
@1AAuto4 жыл бұрын
Anytime Abis! Happy to help in anyway we can!
@codyrobinson6873 жыл бұрын
Hey there thanks for the video how much does this cost to have done both sides of my truck need this done
@marylamb60633 жыл бұрын
You didn't mention what kind of grease to you, where to put it in, and how much.
@hondanation93754 жыл бұрын
Love the how to videos
@1AAuto4 жыл бұрын
+Cummins guy Thanks for checking us out! 1AAuto.com
@shmohsin-lasvegas3 жыл бұрын
Common cause(s) for front and rear axle seal leaks?
@danielredheffer93092 жыл бұрын
Normally age and/or driving conditions. Sometimes things like larger/wider tires can cause more stress on the seals and cause then to wear out prematurely as well.
@kyarakll4os73 жыл бұрын
What are some symptoms of bad axle seal, aside from the leaking? I have a Nissan frontier 2wd. I notice when I accelerate from a dead stop, it feels like the truck rocks back almost like a tiny slip in the gears finally catches. It drives smooth without a problem when I'm cruising, then once I brake and come to a complete stop, it'll do the same jerk/rock back feeling. I honestly thought my driver's seat wasn't fully bolted down and when I accelerate or brake it'll rock a little bit but that's not the case. Also, it doesn't happen all the time. Sometimes the throttle response is perfect and braking is normal. At least 4 times a week it'll do that rocking motion
@donsummers56783 жыл бұрын
Check your universal joint.
@fixmytechnology2 жыл бұрын
You ever find out the issue to the jerk/rock back feeling? I got the same thing happening on my car when slowing down/accelerating, does not happen often maybe once or twice a week.
@cuzheavy4079 Жыл бұрын
I just changed a bearing and seal 2 months ago came out this morning saw gear fluid on the ground is the seal a defect or can something else cause it to leak?
@rinico752 жыл бұрын
how long should this job take for a garage?
@DESPYS1LOSTCITY Жыл бұрын
What type of oil is that leaks? 🤔
@marylamb60633 жыл бұрын
You didn't explain what "gasket maker" you are using. You just showed some tube.
@opslusa44563 жыл бұрын
Nice job i thing i might want you to change mines but where are you located at send some info
@SuzaaYo2 жыл бұрын
I think I have this on my Jeep Wrangler on both front wheels... Does this cause the wheels to shake as well as make the steering wheel jerk and stutter when turning?
@tansyong68542 жыл бұрын
How much will it cost to replace the axle seal?
@fasteddie87824 жыл бұрын
Nice job man..also don't get grease on YA..smells forever
@matthewward58492 жыл бұрын
My brother, as soon as I spun the driveshaft both gears fell out. I hope they aren't too hard to put back in. Also, I noticed mine doesn't have that S clip /clamp in the middle of the gears like yours does. Is that normal? I have an 03 liberty sport v6
@Joe-nc4nf Жыл бұрын
Thank u
@vaughndibble45984 жыл бұрын
And you need to ck the axle vent to make sher it claer of debre. And in your rust belt states free of under coating A plued vent will blow out a axle seal and is vary offen over looked .
@phillyflava36843 жыл бұрын
What the estimate price for this type of repair on 05 Dodge Durango
@jaygar93683 жыл бұрын
How much it cost?
@dannygarcia99893 жыл бұрын
Do you guys have the seal and wheel bearing for a 2006 crown Vic?
@1AAuto3 жыл бұрын
+Danny Garcia We have the rear bearings, but not the seal. They can be found at the link below. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c www.1aauto.com/2-piece-wheel-bearing-set-diy-solutions/i/1ashs00739/1444470/2006
@jeandavis87004 жыл бұрын
Roughly how much do a axel job cost
@Armyhamsters4 жыл бұрын
I'd be charged about $500.
@MiguelMartinez-xy1lr4 жыл бұрын
Around $600 or $700
@crazyj42823 жыл бұрын
Trans shops usually charge between $400 - $500 Normal auto shops charge between $500 - $700. Always call a trans shop first.
@johnjones39772 жыл бұрын
dang the dealer is charging me $1,400
@lylegoodluck Жыл бұрын
Have you heard of a seal leaking because of clogged vent hose?
@AustinHarmon19944 жыл бұрын
You dont put rtv on the outer part of the seal...
@queencitymvp6323 жыл бұрын
I messed up. I turned too much and one of the small wheels fell out.
@matthewward58492 жыл бұрын
Both of mine fell out too. Did you fix it yourself?
@Research-Answers3 жыл бұрын
You forgot to grease the seal lip!
@ronaldwoofer50242 ай бұрын
JUST PULLS THE WHEEL AXLE OUT WITH LIKE 3 FINGERS? WHAT ???
@ronaldwoofer50242 ай бұрын
3:50 ah ok, used up all the luck. Makes sense...
@chris-ij4vc4 жыл бұрын
Ya screw that lol I'll let mechanics deal with this repair.
@315reelffishing74 жыл бұрын
It's not bad I did it few years back now I will have to do it again on another truck saves 💰 doing it your self
@juliomarquez23574 жыл бұрын
How many actually did the DIY? Lol
@reginaldcoby951 Жыл бұрын
Bru
@giantregent26624 жыл бұрын
Gooood my brother I hope you are in my city I’m from Saudi Arabia 💚💐🇸🇦🇺🇸💐💙 But the prince is coming