How to fix an axle seal leak - LRM

[@mikyahalbena-yasharal3387]

It’s probably not said enough, but I really appreciate LRM, and the advice you guys give ! Thank you very much!

[@gh8492]

Your video is a good explanation and demonstration to replacing the outer seal

[@gh8492]

What about replacing the oil?

[@jesuslemus1668]

Transfer case oil or engine oil ?

[@dirtroadsalvation]

What is the torque spec for the nuts and washers?

[@roku89107]

25 ftlbs

[@shawnfairman911]

Great video. Found mine leaking today.

[@LRMLeasing]

happy we can help, what else would you like to see?

[@AlexDeleón-p8e]

Thank you for the tip

[@OscarGonzalez-xy8je]

Great information so I wanted to ask you a question. I have a 2016 freightliner cascadia and freightliner dealer shop replaced my the bearings on the power drive axle and about 2 days later I noticed my hub was leasing oil so i tightened the bolts as all of them were not tight so I thought maybe de dealer failed to tight them to specs, so I replaced the gasket as it was ripped in pieces and tight them enough but it happened again, the bolts were loose and the gasket was again torn to pieces. What could cause the nuts to come loose again. I will appreciate it if you can try to give me your theory on whats happening. Note when I tightened bolts on the hub to about 120 lbs then my other wheel on the same axle started leasing too. I contacted the dealer but I am too far to drive there. Thanks

[@dhillon11]

did you resolve this issue i’m facing same tighten nuts many time and start losing after couple days

[@samperez4984]

@@dhillon11 put metal 'crimp style locknuts on (not the nylon plastic locknuts) and tighten it to specs and you won't have any more problems

[@adamscott4030]

What do you torque the nuts to? Excellent video btw !

[@MarthaMuchunga-rq8vw]

How can you change the seals

[@uria711]

One thing he forgot to mention is you absolutely have to refill that hub with oil there’s a plug you remove and put about half a quart of oil. Otherwise, you are guaranteed to burn up the bearings. Guess how I know.

[@andrewjimenez1794]

Thanks

[@nadjibuidrissa941]

How to put back the oi

[@THESTEIN325]

Fill plug on the diff

[@travryger635]

Thanks soo much! Very helpful well done video. Subscribed 👍🏻

[@fitsumwelde2912]

Good one

[@bigtrev6754]

Great video thanks

[@kubikariYOU]

Thanks 😊

[@angelsanchez116012]

Thank you man

[@govinlama6152]

❤❤❤

[@AbdallaHassan-zm6gk]

U the man

[@AkiraKigRace]

What about to refill it ? 😂🙈

[@kerimatayev5670]

Don’t forget to top up oil.