Old Car battery convert to lithium

[@jeanyluisa8483]

Wow, thats pure ingenuity. Turning an old battiery into an empty box for a new battery and solving the environmental problems of flushing acid and throwing lead and plastic on the ground by a label in the video saying "be cautious on battery waste". When bilding such a lithium battery, a proper box or housing usually would be the cheapest part.

[@Snowaxe3D]

Environment? Lol what part of the world are you from that doesn't damage the "environment"?

[@jeanyluisa8483]

@@Snowaxe3DObviously I am from a part of the world where we do not promote it as an ingenious idea to poison the water we drink and the ground our kids play on. Of course we do a lot of harm here to the environment too, but does that mean we have to like it and do it for no reason?

[@OzgursDen]

Should be Tibetian :D@@Snowaxe3D

[@mrsuarez430]

I think he was being sarcastic ​@@Snowaxe3D

[@Osman-bp6js]

This guy is no ordinary.he must have a good background in electricity science.tq

[@Shotiv889]

just build a 48v, 20ah lithium battery using c40 cylinder type lifepo4 for my ebike.. nothing special, just need the proper materials..

[@eone2345]

I made the same project for my car battery last year using the same old battery case. It have 16 cells inside, about 12volt 20ah enough to crank the car for about 8 times in one session. The performance was much greater because it didn't slowly discharge like lead acid and it cranks smoothly. I used special BMS that can support up to 800Amp (as per seller claim). You idea of only using active balancer was good too, never thought of that. You should properly dispose the old acid to protect the environment. I kept the old acid solutions inside my empty shower bottle. You can use them later on for plating purposes. The lead also can be melt and recycle for other suitable DIY project or sell them to recycling center.

[@albertnario4877]

I will actually use it on a spot welder, that's why I don't use BMS and put voltmeter.. but yes it really good battery replacement on our car battery..

[@eone2345]

@@albertnario4877 ohh.. that's why 👍

[@aznative_]

That's really cool. Are there any issues or modifications needed to charge from the alternator?

[@eone2345]

@@aznative_ so far so good. No modification done at all on car alternator. I'll share some quite ugly pictures of the battery before the new modications to beautify it. kzbin.infobauGhizjiIY?feature=share I totally forgot to snap the 'after' pictures and video of the new modifications. Sorry for that. Hopefully I'll upload that in near future.

[@nareshaggarwal3230]

For how much amount such a battery 12v,100 AH can be procured with complete address of the person/ shop from whom a fully robust battery can be procured.

[@wadetaylor4697]

🔥 Just 1 cell bursts and catches 🔥, by by car!

[@spavliskojr]

Theres no way those delicate connections and microcontrollers would hold up to an automotive application. The temperature extremes and road vibrations would kill it pretty quickly. it would need to be an vibration isolated reinforced circuit and enclosure. not to mention like others said... just use another plastic box. no need to pollute and use a car battery shell.

[@fauxque5057]

Lithium batteries aren't high amperage drain batteries either. More of a deep cycle steady drain battery. They do sell Super Caps that work with your Lithium battery and will store the surge needed to crank a car.

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@WilliamDye-willdye]

He's using it to power a spot welder -- hence the voltmeter. The automotive demonstration was just to show off that it can even start a car.

[@davebeck8973]

Only a temporary battery, you get a couple of uses out of it.

[@kwalaporkompor3447]

In everything you said, nothing is accurate....for the temperature, there is a solution you can put inside your car or you can put a heat absorber around it...for the vibration, there is no problem as long as you are properly positioned inside of the container and it doesn't move, I'm sure the wire and batt cells won't be damaged ... as for using another box, you'll have a hard time molding a container while the container of your old battery is already molded into your car... The circuit that you are talking about has specs, all of them must be correctly installed, there is another 200AH that can be purchased and the one that is installed is an active balancer for each cell so that the charging is equal in every batt cell norhing more nothing less....you have many problems, all of them can be solved.

[@waynegabler6570]

Nice, if you put the empty case in the freezer for a few hours the cell dividers will shatter like a piece of glass, almost. Side cutters will clean up the edges. I put 1.2 styrofoam in the bottom 12v22ah sla battery. Screwed the lid on so I can reuse the case down the road.

[@warrenedser1996]

Shows you have intelligence with knowledge. How much did all the materials cost including the hardware? How long did your battery last when driving? Did you have any problems of temperature and shocks of the car shaking it up? How long and how did you keep it charge or how long did the charge last? Keep adding your videos. Well done.

[@xsauce3858]

Battery last while driving? It cannot be use. Because unlike lead acid battery, lithium battery cannot tolerate all the Heat from the engine and will quickly damage the battery.

[@ekkanofiqandriyana7325]

​@@xsauce3858you don't have to put the battery side to side with the engine, you can place it somewhere inside the cabin.

[@Ryckmaniac]

Good idea , that way when the battery explodes it wont hurt the dirty side of your firewall..

[@ohcrapwhatsnext]

Be cautious on battery waste? Dump the acid on the earth. lol ok Kudos....Great work.. Glad to see you using what you learned about electronics....Creating is living...

[@fauxque5057]

Be careful and don't get it on you, or in your eyes. The earth will be fine

[@altvamp]

Interesting but I wonder was it worth the time and expense, also a couple of things I noticed, the charge controller doesn't seem heavy duty enough to replace the power used, the other is that those wires to the terminals don't look thick enough to carry the 100A+ the starter needs, I suspect the whole thing would go up in smoke if fitted.

[@sali-ali]

I did the same with 18650 (2500 mAh LG) batteries few years ago, it lasted only 6 months. It's a lot cheaper to use accumulator (car battery)

[@Zerpentsa6598]

In certain countries, you can cut one open and dump the old contents anywhere, making the project viable. But you can only do that in Europe if no one sees you, like fly tipping.

[@kombi9648]

Is there a parts list. I would love to build one for my 12v accessories. While camping

[@corinasimionescu5504]

Baterie.de mașină, ești un fenomen.

[@NooonzTunes]

This guy is either an electrician or a genius! Lol

[@letsgobrandon8661]

Amazing how his toes haven’t rotted away.

[@sirdhojtamang9140]

Idea to convert old Lead -Acid battery case into a new case for Lithium Battery is trustworthy. But, in video, no description given for viewers how to assemble. Lithium battery needs a good BMS. Wherefrom BMS is available not defined. And the battery's capacity, voltage, etc. not presented. So it is unacceptable for many.

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@flappingflight8537]

Also is questionable how this will perform under freezing temperatures .

[@ismaelsilguero6016]

Es muy ingenioso, pero poco educativo en cuanto a la protección del medio ambiente. Básicamente por el mal manejo de los desechos de la batería, que son vertidos directamente al suelo, y que es conocido por la mayoría de las personas el grado de peligrosidad de los mismos. Incluso no se ve que vista equipo de protección adecuado para evitar algún tipo de lesión o daño a si mismo.

[@corinasimionescu5504]

Ești un geniu. Ce e asta, dacă nu greșesc, e un generator.

[@alexandryaruskin7072]

И? Во сколько обошлось покупка 64 элементов и контроллера зарядки? Этот аккумулятор заведёт машину при морозе -20'С? Не проще ли сдать старый, и купить новый свинцовый?

[@sinchrotron]

А ещё проще использовать лошадь и телегу

[@madrx2]

"Be cautious on battery waste" procedes to tip all over ground "

[@lutloi5namhanoiduchua]

if you replace it with 33140 lithium battery, it will be much lighter and tastier, capacity 90 ah/h

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@jetroompoc3736]

Much better they have switch for voltage display indicator, since they consuming current when not in used

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@de-libangant.v3088]

Ang galing naman nito... iba Ang talent mo boss

[@artfrank8218]

Could you list, parts for battery build and especially spot welder

[@VCanisMajorisY]

Security. Fix it in the boot of the vehicle with extension wires less heat and vibrations. .

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@BLAZEPSI]

Great Build. If I may add, LIPO is not good when exposed to heat for a long time, engine bay is not a good place for it. I would relocate it to the trunk for batteries longetivity.

[@guttermastersplus5613]

Looks like a nice project but question is is it cheaper to make one or could you just buy that unit already assembled most people don't have the knowledge to do what you do I think Safeway would be by unit intact

[@giftcp82]

Do you have a link to the spot welder you use?

[@peetymcfly8871]

yes, that is indeed a nice spot welder. I too would like one.

[@cronos1675]

I do need that same .

[@hstechnicalsolution8102]

Helping Others In Their Tough Of Need Is The Best Gift Of Humanity So Your One Click Can Change Whole Life ♥️ ♥️ ♥️🙏🙏

[@estegueydijo....]

Many questions come to mind, does it recharge with the alternator? Does it get hot? how long does it last using headlights and electronic components in the car? does it work on winter/cold/snowy places? is it reliable for long trips... 🤔🤔

[@albertnario4877]

it's been in my car for several months.. It did not get any issues using it... but we don't have winter.

[@arnniemartinmarasigan1297]

yeah we don't have winter here in Philippines, always summer and rainy season

[@walter111]

What tool are you using to weld the batteries strips together?

[@rscervin9950]

Hi. It's called a spot welder. You can make one yourself from a microwave transformer

[@walter111]

@@rscervin9950 Ty

[@michaelbrownlee9497]

Pretty stealthy too!

[@haemse]

Which of those spot welders do you recommend? Do you have a link to them?

[@samohraje2433]

I have Minder RC DH30 Max with the highest capacity and it can weld 0.2mm pure nickel strip at highest setting but i had to do a small change. When i was spotwelding my battery pack for portable speaker, the board just started smoking. Than i discovered, the manufacturers does not know the ammount of current going from the battery, via the traces on the PCB to the leads. You need to add a bit of solder along the entire lenght of the traces, positive, negative and MOS's. The you'll be safe to solder but i reccomend to spot like 15 spots and then wait a bit for the temp go down. Otherwise you could destroy it. I don't know the other spotwelders but this one from alliexpres doing its job like it shoul be.

[@haemse]

@@samohraje2433 thank you for the response! For me it seems you show two different spot welders the one you build it with and then another one you plug to the battery at 08:15 Which one do you consider better? thx

[@rigilkentaurus3313]

What parts did you use and what is the final spec of the battery?

[@paulwood2329]

Do Not Dump the acid on the Ground! Dispose of it correctly.

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@Lupelu831]

Love the ending. Lithium Inside. 😅

[@danilomanrique3853]

just a sugestion you could add a touch button to turn off the voltage indicator and use the sealing spray to make it waterproof

[@mukeshpatel5495]

भाई, जब्बर जस्त काम किया।

[@billybbob18]

How do you balance charge it? You would need a balance cable with 48 wires coming off of that.

[@gelo5606]

There is no need in it - this battery will die before it will need a balance :) It’s to hot under there, it will be overcharged, vibration. All of this will this pack quick enough and hopely won’t explode/burn.

[@albertnario4877]

I installed extra balance wire that can be accessed on plastic screw.

[@nethmadissanayake5846]

How many Time have a charge ?🙂

[@4555joe]

How long will last? cost? …Why the car industry does not used then???

[@karyotv2357]

Ang lupit mo pre...

[@electroumit]

Congratulations. Good job.

[@UnknownPerson-cl9di]

I'm happy you didn't use the ordinary 18650 but yes... I doubt these batteries will suit the requirements of most 12v appliances, these batteries have a huge voltage range, you probably need a lot of diodes and boost converters for it to suit an inverter or smth but again.. because your application is a spot welder ig it's fine

[@sleepingwarrior4618]

Remember boys and girls.....there are some people on this earth right now....that thing "given enough time, this battery could create itself".

[@gliderman1176]

Youuu to be...... I'm ready for the cardboard jet... They do a good job at hiding the string

[@2hami]

Thank you for this share, I liked so much

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@jailobadumbidun6244]

Should not using old batteries this will destroying environmental if not handle the right standards will cause many diseases.

[@thiyagarajanpy6273]

Can UPS 600VA battery for computer to lithium battery?

[@sddiymakeitworthit7512]

Super awesome job 👍

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@alejandroobregon8619]

Muy interesante la combersion, pero una versión en Español puede resultar más interesante todavía. Y las informaciones para adquirir los materiales en cuestión. Muy agradecido. Desde CDE. Paraguay.

[@arnniemartinmarasigan1297]

esto video hecho en Filipinas (Philippines), el persona que fabricado el batteria en video es un Filipino.

[@sharukhmatekuki5830]

Well done 👍🏻👍🏻 🇮🇳 || Kuki 08|03|2022

[@HongNguyen-mh9gk]

Trông đơn giản nhưng công nghể phức tap .quá chi tiết kỹ cáng đúng là phải hoc mới biết mà làm

[@gbadishomeassistant748]

What about battery balance ???? or in case of fire ??

[@ReviewsandTech]

Nice conversion bro, can you build a 100Ah LifePo4 battery with BMS? Excellent video bro, thank you sir.

[@halamkajohn]

plastic inside battery can melt if soldered

[@c.h.6390]

--- Did you really wash away the old acid with a water hose? I am shocked. --- Hast Du die Alte Säure wirklich mit einem Wasserschlauch weggespült? Ich bin fassungslos.

[@Shwonn]

Un vehiculo diesel necesita bastantes amperios para arrancar no basta que la bateria de 12. 6 Voltios, me gustaria probarla en mi diesel arrancaria???

[@luis23471]

Utilizó baterías lfp, esa química puede dar más amperes en la descarga que las nmc

[@jochenmuller9388]

Smart idea! Well done! Thanks for your video! 😀👍

[@GregNFresh]

Cleaning on the floor: you are unconscious.

[@haemse]

What cells?

[@lightshine6044]

can you tell me brand name & model number of spot welder ? can you give me link to buy it?

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@whitevanadventures4116]

So dangerous to cut apart a lead acid battery. What happened to all the concentrated sulphuric acid? Also you haven’t converted anything.

[@whitevanadventures4116]

Also I spotted several ways this could short circuit, fail, overheat or possibly catch fire

[@marcuscoster6529]

Can you only use this battery to jumpstart the car or is it set up that the alternator can charge it like a normal car battery?

[@Teknopottu]

You will fry your alternator if you charge with it. Too small internal resistance. There are ways, though. Try searching "charging lithium batteries with an alternator" .

[@noonelovesme8906]

sir saan mo nabili spot weld mo ang ganda..gusto ko din gumawa nyan batt. pangit kasi pag hinang ang ginamit..

[@albertnario4877]

lazada meron

[@richardcowley4087]

fire, waiting to happen

[@hussein26002]

Nice idea and smart.. ((( But this dangerous because in a high weather or from engine..)

[@moisesalvarado4203]

Hi where can get the welder and meterials?

[@Mryiyo209.]

Amazon spot welder

[@saeedchughtai3564]

Why not buy lithium battery with a warranty?

[@cezariusus7595]

How long will it last against the heat?

[@bryanacebedo1001]

nice video sir ! 👌

[@practicallab]

kzbin.info/www/bejne/h5Tal5x9eMmSp6c

[@denichols9122]

It does not show the water solvable lead that is installed in the lead grids

[@Dadakki291]

please make a cd player car mount for ipad and iphone as there are no comprehensive video on this subject.and many many people needs it.i would be very greatful to you plz plz

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@GianF123]

That Yellow connector Is not good for strong current.

[@purushothampai1266]

How to make waterproof battery?

[@colinevans7134]

Buying these batterys would be the cost of a car, well mine would

[@faikaykac]

Hi, are you using this battery at your car still?

[@ubogyi4656]

How much the weight of battery reduced?

[@necubredatikazem]

Hi,perfect job. How much is convert in 200AH?

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@maverickxyph239]

Bro for 1sm battery, what will be the max AH setup?

[@pauljohnbarcena-am-ffcdava4395]

Boss. Ilan Ams gamit mong BMS? Ilan output AH niyang DIY boss? Gawa sana ako pra sa sasakyan ko.

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@kurk7559]

Sir nasa magkakano po ang nagastos po nio lahat para s mga materials lang na nagamit po ninyo?

[@andreyavramov9326]

Yes, it will work for a while, but there are some problems everyone doing this must be aware of. For example(watch?v=bzGFSSgkQYM) shows some serious problems for such conversion!

[@NewsBroadcasting]

best video on youtube. how many CCA?

[@samanmudannayaka9604]

This is what you normally get when you order a car battery on ebay🤣

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@alvingaming87]

hello sir can please do a regulated power supply 0-30v for small projects..

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@jusmandiy2726]

Mantab proses laporannya.

[@W5nmwh50]

Blimey, completely bonkers. But good anyway :)

[@roccodiconza7367]

It's would be cheaper to buy one and no hazard waste

[@stfnsipos]

Costs???

[@CarlosRibeiro-yn6rt]

nossaaa demais ser humano e muito inteligente 🥁🥁🥁🥁

[@jehu2134]

Could be this lithium battery a potential bomb if the temperature of the motor rise up or heat up?

[@cooleristadas]

no

[@Kori114]

Turning an old battery into a box to hold a completely different battery you built. Ok... Could have just used another scrap plastic box, let the old lead acid be recycled. But ok

[@kenanelicanov2327]

What I want to say

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@dharmakissoon]

You wasted energy on something you don't like???

[@DudeinJA]

In my perspective, it's all about the cosmetics of things. Using the old battery case gives the appearance of a normal battery that was modified. Your comments are like saying, why make hybrid cars when you can just make a pure electric car.... They wasted time and energy putting electric components in a gas car instead of just making an all electric vehicle. Again it's just the cosmetics of things I think....

[@idiotbuster8662]

@@DudeinJA that doesn't make any sense at all.

[@curits8260]

update today for the battery?

[@scytaleghola5969]

Something doesn't add up. If you have a small engine car, very well lubricated and very finely tuned, it still takes at least 200 cranking amps to turn over the engine. I don't think those Li-Ion batteries can supply that and I don't think those spot welded strips could carry the load. Just for entertainment, right?

[@terryknox6863]

Not true, you can start a car from a battery pack from a portable electric tool and what do you think are in those Lithium ion jump start packs that weigh less than 2lbs? Please educate yourself before belittling someone else....

[@scytaleghola5969]

@@terryknox6863 The batteries used in those jump starters are LiPo - which is a different technology than standard Li-Ion battery cells.

[@terryknox6863]

@@scytaleghola5969 I never said they were standard Lithium Ion batteries but the batteries in the power tool packs are standard lithium ion usually. The difference between lead acid and any type of lithium ion battery are very different including discharge rates

[@kwalaporkompor3447]

There you will see that when they come together they are stronger and won't break immediately....it's just like hollow blocks when one by one they are fragile but when you put them together they are strong

[@Kogitesolar]

​@@scytaleghola5969I do use 4 units of 18650 to support my weak car battery and start smoothly.

[@reviewswithskus]

putting a lithium battery in a carbureted, non electronic ignition car. Makes sense. Might as well add a hand crank starter while your in there

[@phinyosirang2066]

How thick is the copper sheet used?

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@kenanelicanov2327]

How much amperage it can gives as when you start the engine?

[@rossideas5884]

watch my channel if you like subscribe please kzbin.info/door/6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

[@prafullsoni9672]

How much ampeires in this bettry

[@practicallab]

kzbin.info/www/bejne/h5Tal5x9eMmSp6c

[@SamuraiBud]

where can i buy that solder tool?

[@joaquinninoortega156]

flipsky or buy something chaper online with thick lead wires. or look for diy youtube.

[@roger8772]

Whats the deal? You're soldering onto lithium ion batteries.. I think you should have soldered those thick wires to some tabs THEN weld them to the battery pack