Old Model 18V Rotary Hammer Restoration | MAKITA HBR 241

[@rebeccapugh1466]

The Ingersoll Rand 114GQC Air Hammer kzbin.infoUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.

[@mohammedsalhi591]

that makita deserved to be restored and finally found the right mind and hands. thank u mr Gear Show. I really enjoyed your video.

[@adamnowak8876]

I wouldn’t say it as the gerabox was not fully restored. Only cleaned and grease changed. And in my opinion the concrete test result was not that good. The drill with this diameter should go into the concrete twice as fast. There are o-rings in the hammer assembly that MUST be echxanged in order to restore the gearbox properly. Author of the video did not even find it. Instead he focused on paiting the housing. Give me a break.

[@M1LAD81]

Nice excellent restoration. Venus wants her drill back! 😂

[@gear_show]

Haha... I hope they see it. Thank you!

[@justarideout]

Excellent job I love the new vibrator.

[@gear_show]

Yes, it is easier than before. Thank you!

[@patrickmorrissey2271]

Great Job Sir. The LXT Series isn't that old.... Nice tool. Great job restoring it. Those are not cheap. Great tool to have. I'm sure you do this, but for other viewers.... As you start to collect Makita batteries (or whatever brand you gravitate towards), start NUMBERING the batteries right away. Get a label maker, mark them 1, 2 3 whatever... And the DATE it was new.... when you have a pile of batteries rolling around in your truck, or your home shop, or both, and all the sudden you have a "bad" pack, that can be a real pain in the keester, if you can't identify it, and pull it out of rotation....

[@gear_show]

I do appreciate with your advice, thank you so much!

[@ХоджаДжумабаев]

Әу

[@algeriemonpays5828]

This is what clean work is all about, well done

[@comictrio]

Its good to see a tool repaired and not thrown away. Nice job.

[@gear_show]

Thank you!

[@MYs0708]

I don't know why, I always waiting your restoration more than other 😁 I think, only your restoration that very detil and clear 😄👍

[@re-fix9678]

I like watching your restore😘

[@gear_show]

I'm glad you like my work, thank you!

[@حسين-ج9ط7ي]

Great job, thank you brother. You are so talented

[@gear_show]

I appreciate that!

[@Marcel60]

Makita makes some of the best tools for a good price

[@gear_show]

Yes, they are.

[@muhammadrais4889]

Nice job... Im from Indonesia 🇮🇩🙏

[@krishnagamerz3438]

very good restoration like it , love from india❤❤

[@Ghost-fc3kc]

Great as usual

[@gear_show]

Thanks again!

[@t-risely]

Please, do not solder wires and then insert them into screw terminals. The solder deforms over time and actually “flows” away from the terminal causing the connection to become loose and unstable. This can lead to arcing and potentially a electrical fire. It’s better to screw the terminal down onto bare wire than it is to solder. The proper way to do it would be to use a wire ferrule that is crimped onto the wire and then inserted into the terminal and tightened down. Ferrules keep the strands of the wire in place and provide the best connection for screw type terminal blocks

[@gear_show]

Oh, I never know about this point, I do appreciate with your sharing!

[@lukie4ever]

Oops i do this alot

[@samuilmarshak.]

Yes you're right. Tin is a soft metal. If you want to do it better, use a crimping tool.

[@HogeN1337]

:) i fixed a cord on a old 20W ledlight there the 2leads hade solder onthem and the connect was a wedgetype so understand why did

[@salvatoresalvio204]

BRAVO. MANI ESPERTE, PER UNA BUONA RIPARAZIONE E MANUTENZIONE DELL' UTENSILE. SALUTI SALVIO

[@douglasmoreno7858]

Man,you is my inspiration. Thank you🙌🙏 Fan from Brazil!

[@gear_show]

You're welcome, thank you!

[@nathkrupa3463]

I always like your video and your work is best showing part by part detail showed thanks sir 👍👍😊.

[@meninoandrade9833]

Absolutely well done Clean and accurate good work

[@serkancanturk3373]

Namlu yayını ters takmasının dışında bi hata yok mükemmel işçilik 😊

[@betasolk]

Awesome as usual!!

[@gear_show]

Thanks again!

[@ukaszuczak2248]

Exelent work 👍

[@Traboukos]

Like a new one!!!!Brilliant! I have a challenge for you: Restore the case!!!😂😂

[@gear_show]

Thank you! I restored it behind the scenes

[@zik316]

Another great restoration. I was shocked that you did not restore one of the batteries. Seems like your main thing.

[@gear_show]

Thank you!

[@marv19691]

Super Job.👍👍👍👍

[@SC.243k]

Fanstastic work 👏👌 thanks my friend👍👍👍👍👍🥰

[@pawejaskiewicz9487]

Jesteś wielki. Widać ze długo siedziałeś przy sprzęcie makity. Każdy szczegół każdy detal. Pozdrawiam z polski

[@dendyfebianto4157]

Good job Bro.. 👍👍👍 very detailed every step of the repair, very inspiring.. awesome. 🙏

[@gear_show]

Thank you so much 😀

[@SC.243k]

Fanstastic work 👏👌 thanks my friend👍👍👍👍👍

[@MrDavordj]

Bravo, great job!! 👌👏👏

[@gear_show]

Big thanks

[@larrykelly2838]

Great video, good as new.

[@احمدعدنانهادينعيمه]

يداك من ذهب ،،،شكرا لانك تنشر السعادة ،،،

[@gear_show]

واو ، أنا سعيد للغاية لسماع ذلك ، شكرًا لك!

[@Nguyent2477]

Thank you sir 👍 Hello from #Makita® Viet Nam 🇻🇳

[@eddycalix2406]

Un placer ver tus vídeos 👍 excelente trabajo , saludos desde Honduras 🇭🇳

[@sobhysalim9036]

براڤو ممتاز جدا وروعه تسلم ايدك ❤

[@DrMrSmooth]

Nice video mate . Keep going. 👌

[@gear_show]

Thank you! I'll do.

[@মাইলেকট্রিকএন্ডফিটিংস]

Boss watching from Bangladesh

[@djevo3441]

Another amazing job another amazing restore congratulations my friend

[@gear_show]

Thank you so much 👍

[@HG-ty1pc]

Absolutely insane!

[@selimkurkcu]

awasome.congratulations.

[@alejandro5575]

Increíble restauracion de esa herramienta

[@bongkarsimpan]

Great job

[@Varmadheeraj6]

Thanks to upload video 👍👍👍👍

[@ianwood8223]

Nice job keep them coming from the Uk

[@gear_show]

Thanks, will do!

[@manuelsoul1]

Ottimo lavoro, complimenti

[@yeagerxp]

Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦

[@gear_show]

My pleasure, thank you so much!

[@thomastechnical2075]

Gear show you are the best

[@gear_show]

I appreciate that!

[@sosolife]

You're amazing.😃👍

[@nickjanssens]

The Meat Loaf song comes to mind, I’d do anything but that. A epic breakdown and reassemble.

[@adamnaser1852]

Good job

[@DustRule]

Как повезло инструменту попасть в руки «воскресителя инструментов» 👍🏻. Ваще зачет. Душа радуется. Спасибо за видео 💪🏻

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@gear_show]

Еще раз спасибо! Я рад, что вам нравится этот контент.

[@ezequielsilva2709]

Excelente trabalho 👏👏

[@gear_show]

Thank you!

[@JadsonPrado]

nice job

[@PerryCox818]

Fantastic job !!! It could have been fun if you have restored the box too. ^^

[@07111981snake]

Como sempre, um trabalho formidável. O carregador pequeno de bateria, ele funciona bem em bateria modelo LXT réplica? Pois comprei duas bateria Makita LXT réplica, mas estou confuso se esse tipo de carregador não danifica as células da bateria, visto que o carregador LXT recarrega a bateria usando o conector amarelo.

[@gear_show]

Eu não sei detalhes sobre isso também, isso é um experimento.

[@EDUARDOGONZALEZ-lq7zb]

AWESOM, GREAT JOB THANKS.

[@gear_show]

You're welcome, thank you!

[@ramezgoldman6590]

good job bro

[@shihabsami9809]

Nice video bro

[@thomasgaucher-peressini8785]

Makita look to be well made tools

[@logananderon9693]

Pretty cool.

[@Zaraji1987]

Good man , Good job ,

[@tototoha9311]

Mantap bro 👍🙏

[@Julio-ud1ke]

Maravilloso video

[@muradinfinity3939]

you are creative

[@fxcracker381]

Love you sir from Pakistan

[@vinodpatil495]

Nice 👍

[@김성진-v5p3m]

good job

[@sarmadqutaiba876]

Great job. Why do you open the screw manually and then start the screwdriver??

[@gear_show]

Thank you! I open the screw manually and then start the screwdriver, because I want the video quiet.

[@pitaeata8493]

@@gear_show the sound on your videos is excellent. thank you too for not putting music.

[@yufadanpratama4011]

Sangat suka aku dengan pemulihan makita

[@gear_show]

Aku senang kau menyukainya.

[@joaomaglianooliveira1348]

Parabéns pelo seu trabalho , um belo martelete 👏👏👍🤝🇧🇷🇨🇮

[@ceferistul05]

ah, the 3ah batteries... they were the most popular for a while, we had them around 2012

[@ded_Bidon237]

I have 2 of these, one 2008 never used, the second 2017,in the work

[@SnekSnack]

What spray did you used for plastic housing? Some clearcoat? Satin/matte/petrol-resistant/for plastic?

[@gear_show]

It is flat clear spray.

[@lagilbertona3599]

Makita is the stuff dude's

[@gprasadbelandur7876]

Really super

[@alouisschafer7212]

Ah this is one of the old brushed ones where they used an identical gearbox to the corded version. The HR2470 hammerdrill is where they took this gearbox from.

[@husseinhussein142]

that's awesome

[@stephen8385]

what spray paint did u used for power tool case?

[@mabidhussain729]

nicr restoration

[@Presspero]

По ходу, можно было просто щётки поменять... 💁‍♂️🤦‍♂️🙆‍♂️

[@dikayudistira5238]

Best bro...

[@TheGhost-gx5vd]

Hi what was the silver drill you used WOW

[@nguyeninhhieu1676]

Hello. Can you tell me the name of the yellow oil that you using in 17:00. thank you.

[@suvijakengr3374]

เรียนถาม ใช้อะไรฉีด ก่อนลงแว๊ค ครับ

[@gear_show]

เป็นสเปรย์ใสแบบแบน ผลิตในไทย

[@suvijakengr3374]

@@gear_show ยี่ห้ออะไรครับ

[@makitabelgorod]

20:45 wrong side ring spring. it is absolutely impossible to do this. an inverted spring will damage the oil seal

[@gustavoorellana4351]

Buen trabajo Donde puedo conseguir un simple chárger?

[@silverxiree]

Why did you install the spring in reverse? Any reason to do that?

[@gear_show]

It is my mistake, I just realized while I was editing the video.

[@sekharkumarsana9030]

Nice

[@Vïnzêñt_04]

nice restoration but i think its better to replace the motor with brushless type

[@gear_show]

That is a great idea, thank you!

[@valmirramos4195]

Gratidão GearShow!

[@gear_show]

De nada

[@kuzzmenka]

That's a dirty rotary hammer! Let's make it work with Makita batteries... Oh, shit, it already works with Makita batteries, nothing to do here...

[@gear_show]

Lolz...

[@MrNotredam]

what problem did you have?

[@ArdianF4]

Nice job. Not everyone, will show they're results with real testing after restore the tools. But I heard Makita not good at this days. What do you think about that?

[@gear_show]

I don't know about new tools, but all the vintage tools are good.

[@coolmonkey619]

where do you get these tools from

[@gear_show]

I get these tools from a recycling store.

[@Barneystinson027]

I have the same one. unfortunately it doesn't work well. after 10 seconds of operation, it starts to overheat and loses strength. it overheats in the area of ​​the brushes and brush holders. what could be the cause? gearbox and hammer already one disassembled and the grease changed, but overheating continues.

[@Barneystinson027]

the new brushes have changed and I had to change the brush holder because the old one melted from the heat

[@gear_show]

It might be the armature problem. Please check the armature. If the problem still not fix, you can check the switch.

[@GUERREIROCAIDOGOB]

*LIKEEEE 💥💯💥👍*

[@gear_show]

Thank you! Cheers!

[@arkadiuszkowayk7683]

what's that spray?

[@생각하는나무-u4j]

What's the name of the spray at 11:35?

[@mabidhussain729]

where to buy this moter