Old Rusted Drill Vise - Tool Restoration | Mister Patina

[@andrzejporeda7281]

Super jest to odrestaurowane to elegacje imadełko pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍

[@tomrailton9201]

Thanks

[@misterpatina]

Hey Tom, thank you SO much! :-)

[@tomrailton9201]

I think I have watched everyone you have done and enjoyed them very much. Have you done a workshop video with all your stuff, if you haven't I am sure it would be a great hit. Take care and stay safe sir. Tom.

[@youmasajp]

Thumbs up for using proper punches. It is so simple tool, yet people use whatnot crazy instead of one.

[@randyclyde4939]

Wow! I never would have believed it was the same wrench, had I not watched! Great job!

[@misterpatina]

Thanks Randy!

[@willieckaslike]

An excellent result, and with no recourse to chemical agents, & only the minimum use of power tools. An 'eco-warrior', as well as a skilled craftsman. Thank you for sharing !

[@florintancu9352]

As usual, very nice final result!!!

[@misterpatina]

Thanks Florin! :-)

[@Cradley684]

Nice restoration friend, you should be in the Vise Squad LOL, have a nice day & Stay Safe !!! .

[@prithvirajkshirsagar9535]

Super paint stripper, best sanding. A clean workmanship.

[@butterocean]

Excellent job!!👍

[@misterpatina]

Thanks Michelle!

[@In.New.York.I.Milly.Rock.]

Aaaaand with this one, I've finally watched every single Mr Patina video, from newest to oldest! Thank you for providing content for my insomniac night! Cheers!

[@misterpatina]

Haha, thank you so much man! I really appreciate! New video coming on Sunday 🥳

[@shaunmullings4153]

I'm glad you took the time to sand it more. Well done Mr Patina well done. A remarkable finish. 😉👍

[@misterpatina]

Thanks Shaun!

[@ajdinsacic7356]

Amazing restoration and beautiful color and i love you men

[@otto17023]

Some interesting special effects used in this one... :-)

[@georgemckenzie6552]

Very nice. Keep up the great work you are doing and showing. 👍

[@Mani-cc5lo]

I like it when you put vise on a vise 🙂🙂

[@misterpatina]

Viseception 😄

[@persioboni9373]

Excelente 👏👏👏

[@crabtreeshep4969]

Job well done. The color was perfect. Amazing how well the Hammerite paint works. Very good choice. Thanks again for the videos.

[@garyjones2582]

Very nice work Mr. P....

[@misterpatina]

Thanks Gary!

[@johnboyd6943]

There is only one word to describe your work - superb.

[@misterpatina]

Thanks John! :-)

[@di99utpe]

Loved the filing time lapse. Even more satisfying than sandblasting! Wish you would do them again!

[@derekcomer4858]

Absolutely first class work, very enjoyable to watch. The filing and sanding must have taken a very long time.

[@alexanderb.3798]

Antik? Na ja, Innensechskantschrauben gibt es erst seit den 30er Jahren ;-) Gute Arbeit und gutes Ergebnis jedenfalls. Ein Tipp noch: lass den Senker langsam laufen, dann gibt es weniger Rattermarken.

[@youmasajp]

Even more thumbs up for fixing all the casting marks and dings from use. Carefully, with files, and then sanding. That is where you can separate the true masters, from the backyard butchers.

[@wesleymckenzie7375]

Beautiful overall restoration, i really enjoyed all the time you put into file work. Alot of people don't bother going to that trouble so i really appreciate it when someone does.

[@misterpatina]

Thank you so much! First i thought about fillering, but on „real“ tools i dont really like it. Filing took me about 8 hours on this little buddy, i really appreciate that you saw how much work it is! Thanks for your comments! 🙂

[@phillipschmitt8167]

âu quá rồi mới nghe anh Đức Phúc hát, thích quá đi thôi.

[@rbyaldrzee6657]

Beatiful 👍🏼💯💯

[@joshuaclark1332]

hammered finish. beautiful!

[@misterpatina]

Thank you josh! 🙂

[@2takt_wombat973]

Meisterwerk 🥰

[@charliejames1981]

Awesome how that came out in the end.

[@misterpatina]

Thanks! 🙂

[@texas060]

Wow ! This is very nice. Thank you for Sharing. Stay safe with all this wild times now days.

[@misterpatina]

Thanks Texas! You too! 🙂

[@sardonic_smile_8752]

Impressive filing.

[@misterpatina]

Thanks!

[@williamkendall7412]

Love the finish on it.

[@misterpatina]

Thanks William!

[@briansworkshop01]

Fantastic job looks great thanks for sharing your time and skill and remember#stay safe and make 🍺🍺👍👍

[@misterpatina]

Thanks Brian! 🙂👍

[@Vickie-Bligh]

Nicely done.

[@misterpatina]

Thanks! :-)

[@antonioparra4979]

perfecto como todo lo que hace!!!! gracias por el video.

[@Jawkneebee1975]

Love your work .... on the champers notice chatter marks next time clamp for smooth clean champers . great work!

[@misterpatina]

Thanks!

[@thomasklugh4345]

This thing looks sooo solid. And, ya gotta love the shine made from the rotating wire brush.

[@misterpatina]

Best thing about this project: it was my first on KZbin, and Iam still using it until today 🙂

[@rastorian]

"Античный сверлильный станок" Ох уж мне эти знаменитые античные шестигранные болты 🤣

[@mikecorrado4971]

The restoration far exceeds the original manufacture! 👏👍🏼

[@misterpatina]

Thanks Mike! 🙂👍

[@borilopez8581]

Good as new great job!!

[@misterpatina]

Hey Bori, thanks! You can see this drill vise in nearly every other video 🙂✌️

[@АлексейКорягин-ж9з]

Очень хорошая работа !!! Спасибо за Ваш труд.

[@misterpatina]

Spasibo Bolshoye!

[@jettech1041]

Love the attention to details and the time put into breathing new life into an old tool. 👌

[@misterpatina]

Thank you so much! :-)

[@fernandoburghi3743]

Perfect.

[@misterpatina]

Thanks!

[@jamesmorgan7651]

Man your attention to detail is superb. Beautiful restoration!

[@misterpatina]

Thanks James! I really appreciate!

[@velobob4299]

Just like new again, great.

[@misterpatina]

Thanks Velo!

[@zube6996]

Very nice work. I really like your editing and the fact that you don’t have music playing. I like to hear the actual sound of the work being done. I’ve subscribed and am enjoying your labor of love.

[@misterpatina]

Thank you very much Zube! 🙂

[@fiedbaam]

Sie haben sich da wirklich viel Mühe gegeben und der Schraubstock sieht ganz gut aus. Ein paar Sachen möchte ich allerdings noch anbringen, die so nicht ganz korrekt sind: 1. Beim Bett (Führungsflächen) des Schraubstocks kommt es darauf an, dass er Plan ist. Das Finish hat hier dazu geführt, dass die Flächen leicht verrundet sind, das sollte man vermeiden. Das Bett zu schleifen hat in dem Sinne auch nichts mit dem Entfernen von Gussspuren zu tun. 2. Stahl wird gehärtet indem er glühend (ab ca 800°C) in Öl oder Wasser getaucht und damit abgeschreckt wird. Da der Stahl danach aber zu hart und spröde ist, wird selbiger noch angelassen. Dies geschieht bei Werkzeugen bis zu einem schönen Gelbton des Stahls (ca 220-250°C). Was sie da bei 330°C mit dem Olivenöl gemacht haben, kann ich nicht nachvollziehen. ;) 3. Beim Senken und Entgraten der Löcher bitte wesentlich weniger Drehzahl nehmen um diese Rattermarken zu vermeiden. 4. Sowohl Unterseite des Schraubstocks als auch Anlagefläche der Backe sollten nicht lackiert werden. Zum einen, um Spuren durch Abrieb zu verhindern, zum anderen, um das "Festgammeln" der Backe zu vermeiden.

[@misterpatina]

Erfahrunggemäß kann ich zu Punkt 4 noch ergänzen, dass die lackierte Unterseite die Präzision auf dem Planschitten (bspw.) irritiert. Besser wäre hier gewesen die Unterseite auf einer geebneten Marmorplatte plan zu schleifen. Ich danke Dir vielmals für diese sehr guten Kritikpunkte! Ich versuche mich immer zu verbessern und werde mir deine Worte im Kopf behalten. Ich hoffe dennoch, dass Dir das Video gefallen hat! :-) Gruß aus Frankfurt!

[@fiedbaam]

@@misterpatina selbstverständlich ist das Video dennoch super und besser als das Gepfusche der meisten KZbinr. Genau deshalb habe ich so ausführlich kommentiert, weil man merkt, dass sie sich schon viel Mühe gemacht haben und die Sache eigentlich ernsthaft betreiben wollen. Das merkt man auch in neueren Videos. Im Maschineneinsatz ist natürlich auch essentiell, dass die Unterseite plan ist, das stimmt.

[@misterpatina]

@@fiedbaam vielen vielen Dank, ich weiß Ihre netten Worte wirklich sehr zu schätzen! :-)

[@maffin1810]

Wow awesome work

[@misterpatina]

marvin zineker thanks! :)

[@frankmurphy5]

Everyone's always removing sharp edges, not realizing those were an intentional feature of old stuff meant to cull the weak.

[@robertgrell486]

👍😉Nice

[@misterpatina]

Thanks! :-)

[@shawnataylor7998]

Nice job!

[@misterpatina]

Thanks Shawna!

[@LucaCapolupo]

Bel lavoro, forse il trapano dovrebbe girare più piano... Complimenti bel video

[@jamesmoe9188]

It made me very happy to see you filing off all the cast marks, just because I dislike cast as an aesthetic. Lovely finished piece. Some body filler might do well for spots where it's too deep to file out, if you want to be really finicky about it. Mr. Beer sent me. Subbed!

[@misterpatina]

Hey James, thanks a lot! I thought about using body filler, but since I wanted to really use this Tool, I didn’t. Dr. Beer? Mister Patina? You, sir, are a man of culture and pretty good taste 😉 Thanks again and welcome 🙂

[@pierreetleloup7846]

Magnifique ! 👏

[@misterpatina]

Thanks Pierre! 🙂

[@Minipickuprich]

While I agree the final result looks good, it hardly needed restoration in the first place. And your name of Mister Patina is lost on me…as the patina that was there has now been lost forever. As I said though, the final result looks good .

[@MT-uu5ln]

Great work, i love the filling part the most.

[@misterpatina]

M T thanks :-)

[@Tracks777]

amazing content

[@misterpatina]

MisterTracks thank you! :)

[@KaplaWorld]

1st Vise

[@danceswithaardvarks3284]

Very nicely done. That grey paint looks great and it certainly looked better than a new one So hard to find one of these that has no drill holes in the rails and jaws.

[@davidcox2264]

Better than new.

[@misterpatina]

Thanks David!

[@tomrailton9201]

That was absolutely fantastic sir. How long did that take? If you don't mind me asking. Take care and stay safe. Tom.

[@misterpatina]

Thanks! It took around 2-3 weeks, always a few relaxed hours in the evening...:-) The same for you! :-)

[@thedeath3016]

you should get a sandblaster! super easy to remove old paint and rust. But great job as always

[@misterpatina]

Thanks a lot! I got a sandblaster now, you can see it in my other videos. I also got a lathe, if you like lathe videos 🙂

[@scotthowell8083]

nice job!

[@misterpatina]

Thanks!

[@wesleymckenzie7375]

I don't think you got either of those clamps hot enough to actually harden them. I think you needed to be up over 1300 F (around 750 C)

[@misterpatina]

Wesley Mckenzie thanks for your comment! Yes, they could have been a little hotter, but important for me was the rustproofing/finish. I keep your words in mind for the next projects, hope my little burner will do it 😉

[@jeffdorrity5609]

Or you could try this “Magnetism: Remember that, at the critical temperature, when the phase change to austenite begins, the steel will become non-magnetic.”

[@timoh9220]

This steel probably couldn't be hardened anyway. Like why would these parts be made of tool steel? Otherwise a great video. Love the finished result and especially the filework!

[@daveys]

I think “restoration” is inaccurate. This is like Concours for machine vices. Lovely result!

[@misterpatina]

Thanks Dave!

[@martinbrace7195]

Hi great video was just wandering what do you with the finished article. Thanks

[@misterpatina]

If you should watch my other videos, you’d know 🙂 Edit: iam using this drill vise for my other Restoration projects

[@logananderon9693]

Those hand chamfered holes sure got chowdered up.

[@Jout2989]

Amazing work, how often you test the paint to make sure you’re not grinding on lead based paints?

[@misterpatina]

Thanks! To be honest, on this project i didnt test it, but i did on later ones. But iam always wearing my PPE.

[@quartzlierquartzlier]

👌🎨👍😁

[@misterpatina]

🙂👍

[@jeffwyssenbach4206]

What brush did you use as the “paint killer”? Great video as always!

[@misterpatina]

That’s a CSD disc 🙂

[@jeffwyssenbach4206]

@@misterpatina thanks, I’ll add it to my shop buying list.

[@user-brobdingneg]

Ну не античные они совсем! На тисках нет гравюр греческих или итальянских! 😊 А после реставрации стали просто ультра современные! 😳😍 На таких тисках нужно клейма ставить. На золотые слитки ☝️🙂

[@timsmith1589]

Turned out great, nothing like a little bastard file work out either. Nice job bro.

[@misterpatina]

There’s nothing better than a well filed surface. Thanks! 🙂

[@Caracal-lm6es]

Since it's not broken, you really should fix it.

[@brianleezh]

Hard graft! Don't you just hate it when the glove tears and the filing gets under your nails...

[@anderarraa249]

Be carefull, the cold bluing liquid must be on a glass not on plastic plate... Nice job

[@misterpatina]

Oh ok thanks Bro!

[@sidneimanzutti7735]

👨‍🔧👍

[@dzy97]

Deine Zange die du beim Brünieren genommen hast, woher hast du die ? Ich hab auch ein paar davon weil ich in einer Kettenfabrik arbeite 😉 Woanders gibts die glaub ich garnicht 😅

[@misterpatina]

Moin Zocker, die Zange hab ich um ehrlich zu sein „gefunden“, bzw. war sie in einem alten Werkzeugkasten. Tausend Dank für die Info, finde es immer gut möglichst viel über die Tools zu wissen :-) Solltest du eine richtig verrostete, alte, Defekte haben, meld dich gerne bei mir. Email Adresse ist in der Kanalinformation :-)

[@dzy97]

Mister Patina Auch cool 😊 Ja mache ich allerdings restauriere ich auch habe nurnoch keinen kanal dafür 😅 Mir fehlen da noch kleine sachen und meine langersehnte drehmaschiene 😆

[@misterpatina]

Achso, cool! Wusste ich nicht. Dann mal viel Erfolg und gib Bescheid wenn der Channel steht 🙂👍

[@markusgrohnert]

das ist eine Sprengringzange, die gibt's in öffnend und schließend.

[@gabrielgomescunha]

That type of countersink bits are only good for soft materials and low speeds. I just stopped using then. I use the other type with a hole don't know the name of.

[@misterpatina]

Youre right, theyre not the best. Ill buy some 4 "bladed" now.

[@rogerpatrongonzalez5800]

👏👍👏👍👏👍👏👍👏👍👏👍👏👍🥃🥃🥃

[@davidgannon5388]

This wasn't a "restoration" so much as it was a "make it pretty."

[@ihasolak]

"Drill my dear, please be gentle."

[@TheCuriousOrbs]

Those 4-flute chamfering bits are an awful design. Spend a few extra bucks and go the 6-flute "chatter-less" bits on Amazon. Smooth as a shit sandwich. The final result looks incredible though. Terrific job!

[@misterpatina]

Thanks for the information! I always struggle with those bits, I’ll get the 6-flute! Thank you!

[@danceswithaardvarks3284]

Thanks for that comment. Will be trying a six flute too.

[@sandeshmadye2249]

Are you located in Germany ?

[@misterpatina]

Yes sir.

[@andreykvv]

Рабочие поверхности напильником? Ну если только в планах делать гвозди.....

[@PanzarMetal]

Ok so we have "I make a new one" then the "Ducktor" now what's the gimmick of this fella?

[@bob-ny6kn]

Courier New 10 point.

[@moshebron2105]

This vice is not old, neglected yes but not old

[@micha-benjamintrick4516]

Gutes Video. Aber Senk bitte nicht so schnell. Ich bin Industriemechaniker und Senke mit maximal 200 Umdrehungen

[@misterpatina]

Ich DENKE mal du meinst SENKEN? ;-) Danke für den Tipp Micha!

[@micha-benjamintrick4516]

@@misterpatina Ja Senken 🧐🤪. Ich mag deine Videos

[@misterpatina]

Haha, hat sich aber witzig gelesen. Vielen Dank!

[@derekwagner157]

Hammerite is sexy, sexy paint! A+ !

[@MMitchellMarmel]

10:10 For pity's sake, sharpen that poor deburring bud! :(

[@misterpatina]

To be honest - it was brandnew. The problem: it just got 3 blades, which causes some sort of frequency which causes a bad cut. Iam using a 4 bladed now, much better 🙂

[@URVICUS]

это не труборез.

[@misterpatina]

You’re right, it’s a vise

[@obiwankenobi8942]

What a waste of virgin olive oil

[@miha4096]

Зачем покрасили низ?

[@dsprts]

По русски?

[@evgenyzamansky1155]

Это полная реставрация? Ну тогда я китаец!

[@LeighAnnWagor]

I absolutely hate when people drag a file backwards. Nothing will destroy it quicker.

[@polykarp1621]

Great job!

[@misterpatina]

Thanks!