1930's Adriance Wrench | Restoration

[@brettfret267]

Need to bevel each end before you weld for a more stronger weld. It won’t be long before that weld fails. It’s easy to see when you grind it down. Other than that, great work!

[@misterpatina]

Thanks Brett, I’ll keep in mind ✌️

[@maxjakobsen5526]

Just my word.

[@TheBradinator214]

Exactly, I was saying that to myself when he started welding the tang on.

[@AnarxKi]

Ditto all the above.

[@MUN.A1988]

This is my notice

[@viajodefusca]

Hand Tool Rescue é ferramenta de colecionador. Voltou a vida novamente.

[@der_pinguin44]

That's a very nice adjustable hammer.

[@der_pinguin44]

Ach, auch, wer ist Dr. Beer?

[@misterpatina]

That’s what the pre owner said

[@misterpatina]

Ein Freund von mir, schau mal auf KZbin nach „not terrible restorations - by Dr. Beer“

[@StealthDonut1]

Beautiful work, sir! Filing everything down smooth is apparently an enormous amount of work, but I tell you that you can clearly see the difference! This was a fantastic renovation!

[@misterpatina]

Yes it is! Thank you so much! 🙂

[@CoolAgainRestoration]

Nice outcome pal👏 I feel the pain in that enormous time of filing and sanding 😅

[@misterpatina]

Haha, you’re absolutely right man! Thanks a lot!

[@NTRprojects]

I like the nice finish of the parts. Good work with the scotch brite. And nice to see you enjoy my little birthday present

[@misterpatina]

Thanks a lot my beery friend!

[@ex-scientia4234]

Nice job and a pleasure to watch. Bit surprised at the beginning you didn’t try heating the stiff nut with a blowtorch to expand it. May have saved damaging it. Also recutting the threads on shaft and nut. Might have been better than doing the welding job which I don’t see will be strong enough to hold the parts together when using the wrench and will break over a period of time.

[@Fake-moon-landing.]

Great job, When you chopped the threaded end off, I would of chopped it a bit further down . Then drilled and tapped the end and used a fully threaded bolt and screwed it in then welded it. That part needs to be strong, if it's going to be used.

[@shedmanx3640]

You never fail to amaze me with your outstanding restorations. The attention to detail is beyond expectations.

[@misterpatina]

Thank you so much! I really aprecciate!

[@gregj.gotham4402]

I have a bunch of them used on old steam trains during the day. None restored yet. Seeing this restore makes me want to start on mine.

[@misterpatina]

Go for it 🙂

[@mizteryozo]

Big Respect to all Restoration Content Channel.

[@misterpatina]

Thanks Yoso!

[@scharferschnitt1071]

what a premium outcome

[@misterpatina]

🥳🥳🥳

[@clydebalcom3679]

Wow. That wrench has been through the wringer more than once. It deserves your attention and love.

[@misterpatina]

Thanks Clyde! 🙂

[@osumailguy]

Most restoration s take things back to original look ... You make them look better than original!!!

[@misterpatina]

Hey Ron, thanks! I really aprecciate!

[@kamele.belkacem8275]

6:33 when welding tool's arm like this one, it's better to plan for a conical cut of the two sides and rude prepa of the surface and fill the whole space with welding matter, it provide more grip and solidity, i am sure you know that but you didn't apply it because perhaps you think there's no huge tension on this arm, anyway great work as usual and your metal hand file skills and controls are outstanding

[@johnhensley7027]

Your removal of the casting marks and other flaws on the metal are appreciated. Well done.

[@misterpatina]

Thanks John!

[@drstrangefart]

Beautiful restoration. Second on heavily chamfering edges on your welds. It gives you MUCH deeper weld penetration for welds that are almost always stronger than the surrounding material. All that aside that wrench probably looks better than it did the day it was made.

[@misterpatina]

Got the hint, thanks a lot 🙂✌️

[@rogerpatrongonzalez5800]

“SWEET” job. Congratulations

[@misterpatina]

Thanks Roger!

[@ElwoodFarmGoats]

Looked amazing. Seeing the knurling tool and how good it looked after was really cool.

[@misterpatina]

Hey Elwood, iam glad you enjoyed!

[@wobber999]

Another wonderful restoration mr patina

[@misterpatina]

Thanks Roger!

[@FatKidatSpeed]

I used an exact same wrench as that when I got into bicycle mechanics. They're great hammers too

[@misterpatina]

Yes, they really are...:D

[@lindakurgpold-digitalartis9981]

These old tools look so good after you’re done with them! So much more interesting than a modern wrench too!

[@misterpatina]

Hey Miss K! Thank you so much! :-)

[@crabtreeshep4969]

Another one saved from the grave Mr P. Enjoyed the process as always. Your determination to do it right and well are, as usual, an inspiration to all us novice restorers in KZbin land! Thank you so much for sharing your talent once again!!!

[@wayneandrus240]

This man is an expert machinist as well as a great artist.What a pleasure to watch!!!

[@misterpatina]

Thanks Wayne :-)

[@heyhocodyo97]

He fixed it one piece at a time

[@nickjanssens]

Watching this I was reminded of my first metalwork class nearly 60 years ago, a great watch.

[@misterpatina]

Hey Nick, iam glad you enjoyed!

[@BennyCFD]

Beautiful restoration..................Should had beveled the weld site for greater strength.

[@NapierNimbus]

Wow, another one I thought was beyond saving, awesome job, quite probably better than new. Neat idea to use the chuck stock of the lathe to brace the thread cutter square on to the handle shaft. Good comment re the weld, bevelling the edges prior to welding gives a channel around the join for the weld material to accumulate into hence stronger weld.

[@misterpatina]

Thank you so much! Ill keep your words in mind :-)

[@DrMrSmooth]

Nice video colleague . Good restore . 🥳💪

[@misterpatina]

Thanks mate ✌️

[@michelecrown2426]

Nice outcome. And I'm glad you were able to etch the name back on.

[@misterpatina]

Thanks Michele!

[@re-fix9678]

Good restore👍👍

[@misterpatina]

Thanks!

[@larrykelly2838]

Great restoration, I can remember my Father and Grandfather using a wrench very similar back in the late 40s and 50s.

[@misterpatina]

Thanks Larry!

[@sandrawest2105]

I bet even when this wrench was brand new it didn’t look this good! 🤗. Awesome job! Peace 💫

[@misterpatina]

Thanks Sandra! :-)

[@EricLelei]

Great job buddy, such a good thing knowing that that wrench is not going into the garbage.

[@misterpatina]

Thanks Eric!

[@sawboss5794]

You made a new tang! MyMechancs would be so proud!

[@misterpatina]

Haha, I bet!

[@FreakoDude709]

I like many of your viewers, love to restore antique tools and equipment. I subscribe to many other restoration channels but you are my absolute favorite. Just wanted to say thank you for all the work you do, it has given me hours and hours of entertainment and new ideas for my own projects. Thanks man.

[@misterpatina]

Hey man, thank you so much, I really aprecciate! Your words are the reason iam doing this

[@kyriakos7179]

What a beauty! Cheers from Athens Greece

[@misterpatina]

Thanks! Cheers from Germany!

[@fmsracing442]

Awesome. I thought at the end you would blue the metal to protect it from rust.

[@gsh319]

truly skilled work.............nice job, real nice. This is more of a reconditioning than restoration.......... The name should have stayed as originally punched and the handle could have easily been straightened and those threads could have been dressed up......... the new handle could have been the only replaced part. But your skills are top shelf. Thank you for letting us in to see.

[@pamelapolk6254]

It's breathtaking!

[@robertmyers5993]

I have watched this video 3 times, so good. These tools you restore, like this beauty of a wrench, were formally mistreated or used for something it wasn't designed to handle hence it bent and someone discarded or sold it. I am glad you take the time to put these tools back into working order, Bravo on another fine restoration!

[@misterpatina]

Thanks Robert! Iam really glad you like my work :-)

[@vijaynaik7739]

Your restorations are simply Superb, great workmanship, I watch most of your work twice and never felt bore. Once again great Sir.

[@misterpatina]

Thanks a lot!

[@dan-omiteyounger4939]

Absolutely beautiful

[@misterpatina]

Thank you so much!

[@subhajitpattnaik4188]

Mr Patina, please upload more videos. Its one of the best restoration video I have seen. Thank you for it.

[@misterpatina]

Thanks!

[@jlee1072]

‘I make a new nut’ nice work and homage to my mechanics

[@misterpatina]

Thanks J!

[@matui6983]

Beautifully done. They just dont make tools that can stand the test of time like that anymore.

[@misterpatina]

Thanks! Yeah, that’s right unfortunately..

[@kregis81]

That's a beautiful wrench sir

[@misterpatina]

Thanks a lot Kerron!

[@ThomasSmith-vq2kf]

You are a tru Entertainer when you do a backstory on your projects like what company made them and how long ago it was True Entertainment

[@misterpatina]

Hey Thomas, iam glad you enjoyed!

[@garymucher4082]

Very nice indeed. Still has that older look but with a clean finish. Thumbs Up!

[@misterpatina]

Thanks Gary! 🙂

[@franksando635]

One more fine old tool brought back to life thanks to you 👍 great video

[@misterpatina]

Thanks Frank!

[@ntinos4520]

I see you from Greece🇬🇷 nice video

[@misterpatina]

Thanks a lot!

[@DeirdreYoung1]

11:56 "Easy" - no, no no no. You make it *look* easy ;)

[@misterpatina]

Oh you got me 😄

[@richardheilmann4007]

Beautiful result.

[@misterpatina]

Thanks Richard!

[@pickletreewoodcraft7858]

Splendid job, looks better than some new tools you see on the shelf it’s just a classic design.

[@misterpatina]

Thanks!

[@isi3978]

¡ Que maravilla ! Muchas gracias por enseñarnos el arte de la muy buena restauración, es usted el mejor sin duda alguna. Un saludo desde España 🇪🇦

[@seanmaloney9482]

So talented

[@Trapspecial]

Looks better than when it was new I bet. Well done.

[@misterpatina]

Thanks Charlie 🙂

[@jdecouverte2752]

this tool has never been so beautiful is well finished, sir patina you work miracles with not much, 1000 bravos you make sure thank you for this video @soon

[@misterpatina]

Thank goodness!

[@Sjels17]

Very Nice. Probably did not even look this good when it came of the productionline. True craftsmandship ✨

[@misterpatina]

Thank you so much!

[@الخمينيالدجالالمجوسي]

Oohh i dont know what to say.. the word wonderful is not enough 👑👏👑

[@misterpatina]

Thanks!

[@waals2663]

Beautiful work .. high skilled man

[@misterpatina]

Thanks a lot!

[@carlmcgee1623]

Another addition to the kings arsenal.

[@misterpatina]

Thanks Carl!

[@RaginEagle]

Beautiful results

[@misterpatina]

Thanks Larry!

[@bobjoncas2814]

lookin' good, nice work,,,

[@misterpatina]

Thanks Bob!

[@cangurel6249]

It's just perfect. You are very good bro.

[@misterpatina]

Thanks Can!

[@NHTGAMING2024]

Eres el mejor en tu campo. ¡Increíble trabajo! 😍

[@misterpatina]

Muchas gracias senor! Saludos desde Alemannia!

[@nuassul]

Wooooow que buena restauración de esta vieja herramienta, sin duda hiciste muy buen trabajo 10/10*

[@misterpatina]

Muchas gracias!

[@Jimmiburn]

Mr "P" pure genius fantastic restoration hats off to you sir...👌

[@misterpatina]

Thanks a lot Jamie!

[@garyjones2582]

That turned out beautiful.. Way better than new.. Thx for taking us along.. Take care my friend...

[@misterpatina]

Hey Gary, thanks my friend!

[@MrDanilop45]

Masterpiece

[@dingdong7440]

Brilliant, but nothing left of the original tool.

[@scottmiller8195]

Pretty sick restoration. Two thumbs up!

[@misterpatina]

Thank you so much!

[@FerretPirate]

Hey! I have one of those! I can't wait to learn how to fix it.

[@misterpatina]

Good luck 🙂

[@DrHutOfHandcraft]

Beautiful work as always my friend! Great filming and editing, beautiful shots. Always a little sad when a video is over, because I have to wait till the next one comes out 😄

[@DavidCadena-h1l]

Wow, nice work. Well done Sir 👏

[@misterpatina]

Thanks!

[@antonioparra4979]

como siempre señor patina una belleza de trabajo!!!! mil gracias por el video, que Dios lo bendiga siempre amen.

[@misterpatina]

Gracias Antonio!

[@TheMakedonsky]

That's unbelievable! Waiting for new restorations)

[@Sevenpoint_two]

Outstanding result 👌

[@misterpatina]

Thanks Travis!

[@LFKGooner]

Well that was therapeutic. Great video as always. I like the sound of file on iron.

[@misterpatina]

Hey iam glad you enjoyed 🙂

[@davethursfield9283]

Superb. You and My Mechanicss are the best restoration channels I've seen.

[@misterpatina]

Thanks Dave!

[@masby.gaming]

I like that wrench. Very beautiful restoration

[@misterpatina]

I like that masby

[@cioppac]

Nice job, I want that wrench!

[@sleepytabby9113]

Your restoration work makes me appreciate the beauty of some tools. The wrench looks wonderful now. Great job! ❤

[@misterpatina]

Thanks Tabby! 🙂

[@PerfectRestore]

Keep up the good work!!! interesting and fascinating to watch!!! Inspiration to you👍

[@clarafarmer9411]

lâu lâu coi mấy này cũng vui

[@billakosl.a3227]

Another great restoration and a lot of grinding

[@rpg2181]

Good job for a good tool.

[@misterpatina]

Thanks!

[@williamjemeyson5101]

Fantastic work, as always

[@misterpatina]

Thanks William!

[@DavidPlass]

Amazing result!

[@misterpatina]

Thanks David!

[@Morocco-m3s]

Viel Glück und weiterhin viel Erfolg, viel Glück und Erfolg 👍🌸 Tolles Video 👍👍

[@misterpatina]

Vielen Dank! 🙂

[@Cradley684]

Very sweet friend, great restoration friend, have a nice day !!!.

[@misterpatina]

Thank you so much Brian, you too!

[@Captainalexstars94er]

Im very Proud of you Patina, that you Restorat that beautiful Wrench good job Once again You deserve my Captain Approved ✔️ Your Captain Alex Ahoi! ⚓

[@misterpatina]

Hey Captain, it’s a true honor to me. Thank you so much! 😄

[@manuelsoul1]

Ottimo lavoro amico, sei il mago dei restauri, saluti 👍👍👍👍👍👍

[@paulorth2251]

Interesting restoration of an old tool, returned to its former glory. Time to mount it on a plaque and present it to a worthy person. Thanks for sharing. 👍😁🇨🇱🇺🇸

[@misterpatina]

Haha, thanks Paul! 🙂✌️

[@kandarthecougar]

Very very nice work, thank you for sharing this video. 👍

[@misterpatina]

Thank you so much!

[@churlepatakha]

I give you triple S. Super, sweet and satisfying!

[@misterpatina]

Haha, thanks Shahid!

[@philippelavoix3690]

Its Always a plaisir wach yours vidéos ! Thanks you !!!

[@misterpatina]

Hey Philippe, thanks!

[@royothebuzz]

Brilliant, enjoyable watch. Cheers

[@misterpatina]

Thanks 🙂

[@whocares0692]

Beautiful restoration.

[@7tmgiu]

Pure comment for support chanel. 😉

[@misterpatina]

Thanks!