The biggest and most difficult ship model kit - #11 - USS CONFEDERACY

The biggest and most difficult ship model kit - #11 - USS CONFEDERACY - [PLANKING around the FRAMES]

Рет қаралды 9,619

Olha Batchvarov

Күн бұрын

Пікірлер: 56

@OlhaBatchvarov 28 күн бұрын

🔥This video has SUBTITLES that you can TRANSLATE into any language🔥

@salvatoremaccarone1429 3 ай бұрын

Wellcome back Olha! It is so good to watch you working again on the Confederacy ...

@OlhaBatchvarov 3 ай бұрын

Thank you very much!

@johnreid3057 Ай бұрын

wonderful stuff. Great videos .I sure could of used videos like this when I built my scratch built Victory 1:72 in1972 using Longridges book.Thanks to you things are so much easier now. Cheers John.

@OlhaBatchvarov Ай бұрын

Thank you! Glad you're finding them helpful!

@johnreid3057 Ай бұрын

@@OlhaBatchvarov I think that the internet has helped ship modeling grow into what it is today. I have the Confederacy here in a box. I am84 and working on a couple battle stations one of them being Victory and the other of a Spanish of the same era. If I decide to build the Confederacy I will have to use some shortcuts such as no tree nails or guns on the lower decks to save time. Victory took me about 6000 hours and years to build plus all the research required. I think that I would be pushing my luck if I don't cut a few corners in view of my age. That is why I chose an Admiralty style model as they seemed to have varying degrees of detail. Do you think that this sounds like a good plan. Are there still others things that I could eliminate and still be within what is required and yet still call it a Admiralty model? Thank you. Cheers. John.

@denisv4385 3 ай бұрын

The preparatory work for planking that you did makes sense in this video. Thank you very much! We can feel that Imbir is well with you and happy )))

@OlhaBatchvarov 3 ай бұрын

Yes, this is a very boring process, but it is also very important for planking. But for some reason, most modelers, especially beginners, neglect to make markings. Unfortunately, mistakenly believing that everything will be done by eye, just to start gluing the planks faster...

@Darryl603 Ай бұрын

Your work is absolutely amazing! So nice! You will win medals with this one! We are so fortunate to see you working. Thank you so much for sharing. : )

@OlhaBatchvarov Ай бұрын

Thank you, that means a lot to me! 🙂

@RossPotts Ай бұрын

Wow! When I first started viewing this, the lines drawn and planks laid were so perfect, I thought it was a CGI video

@OlhaBatchvarov Ай бұрын

Thank you very much!

@robertsalanon2909 Ай бұрын

Great build D·Ohla ...Congratulations ...

@OlhaBatchvarov Ай бұрын

Thank you!

@CAPNMAC82 Ай бұрын

The turn, aft, across the steeply rising floors as the planks turn onto the fairwater of the sternpost's deadwood, wants careful attention. As you demonstrate here. They can also "want" to reverse the taper the slightest bit, and this is a pain to watch and approach. The four-butt step of the planking is just exquisite.

@type2280303 Ай бұрын

As always this is just an outstanding work done Olha !! That planking is just top-notch, looks absolutely outstanding 😍 I do totally understand the preparation now, makes perfect sense and makes work easier, and the result just brilliant !! Always impressed by your skills, and always learning from your video's 🤩

@OlhaBatchvarov Ай бұрын

Thank you so much 😀 I am glad it was helpful...

@1banana25 Ай бұрын

Masterful!

@OlhaBatchvarov Ай бұрын

Thank you!

@byrgesen6633 Ай бұрын

Very nice work.

@OlhaBatchvarov Ай бұрын

Thank you!

@SergeGlibert Ай бұрын

I'm really impressed by your work on this model and all the others. Each time it gives me ideas to improve my skills. Thank you so much Olha!!! 😊😊😊

@OlhaBatchvarov Ай бұрын

Thank you very much!

@B747-4OO Ай бұрын

Seems to be very time consuming as well. But the result looks really great!! 👍 And nice to see the quality inspector back on duty! 😻

@OlhaBatchvarov Ай бұрын

Yes, thanks😻😻😻

@SQSNSQ Ай бұрын

Somehow, this particular video reminds me the great movie "The Ballad of Buster Scruggs", the scene with the trapper in a coach. 🙂 Great job, though, as usual!

@OlhaBatchvarov Ай бұрын

Thank you!

@jamesjackson-lf2lw Ай бұрын

Beautiful work. Thank you!

@OlhaBatchvarov Ай бұрын

Thank you so much 😀

@RichardWells-ft6sf 18 сағат бұрын

Did I not pay enough attention in geometry class, or what? That girl is amazing. I could do a plank pulling video.

@genojoe3176 Ай бұрын

Absolutely stunning! I could never do that...

@OlhaBatchvarov Ай бұрын

Thank you!

@ВячеславФадеев-ж2ц Ай бұрын

Великолепно !!! Прекрасная очередная работа . P. S. Бог ваши руки поцеловал !!!

@goforitpainting Ай бұрын

So cool. 👍

@OlhaBatchvarov Ай бұрын

Thank you!

@efoxxok7478 Ай бұрын

Just curious. With the glue you are using how long until you can remove the clamps?

@anguscampbell9311 3 ай бұрын

Don’t get me wrong but it’s nice to see that a pro can make a mistake and have to rip out a newly laid plank. Was that isopropyl alcohol you were using with the heat? I also noticed that you never carve a rabbit in the keel. Model Shipways kits include this step and I regret doing so, especially considering that the hull will be coppered anyway. I’m also considering adding bass filler blocks between frames on my Constitution model; I can see the benefit. Thanks again as always and stay safe in your travels. I just got back from a cruise on the lower Danube and the rains have made a real mess in that part of Europe.

@OlhaBatchvarov 2 ай бұрын

Tearing off planks is a part of planking. On such a large and long hull, this is not surprising. I just use water so as not to burn the hull through the thin strip... Rabbet - This is necessary on real ships, or if you are building on real frames with partial planking. And if your model is on the bulcheads and the end result will be the same, why add more work to yourself. In addition, it will be much easier for you to first perfectly sand the planking, and then install the backbone...

@utubefroggy Ай бұрын

Good morning from Peachtree City

@mustafat.mustafa1672 Ай бұрын

Excellent hull planking. What kind of wood are you using in planking? Are the planks laser cut? Do you paint the side of rhe planks or are they laser burn? Thanks.

@OlhaBatchvarov Ай бұрын

This is Castello Boxwood. As far as I remember, I show in detail how to prepare the planks in episode #5. What caulking paint I used and how to cut them of uniform thickness without a planer...

@MarkCorriston 3 ай бұрын

I have been looking forward to your resumption of work on Confederacy. I am working on my own ship project and have been following your technique to advance my own skill. Your videos help a lot. A question: how thick are the planks you are placing on the lower hull?

@OlhaBatchvarov 3 ай бұрын

Thank you very much! I am glad that my videos were useful to you! P.S. I don't remember anymore, because I made this part of the olanking in the winter, and now I am in Ukraine, I don't have the opportunity to measure them now. Approximately 1,2-1,5 mm. Text me this question again sometime before Christmas - I can measure them when I get home...

@MarkCorriston 3 ай бұрын

Thank you. Also (two more short questions) is this wood that came with the kit, and, what kind of wood are you using for this planking? I remember in one of your videos that you gathered up the kit wood and put it in a trash can, and then cut your own wood. I ask because I bought the Confederacy kit this summer, and have not opened it. I also recently acquired plans for Bon Homme Richard (but don't know when I will get to it). It is a build that might be quite similar to the HMS Serapis, which is the ship I am working on and using your techniques as much as I can. Please stay safe in Ukraine.

@ech0tang0 Ай бұрын

Amazing. How many weeks did that planking take you?

@OlhaBatchvarov Ай бұрын

This part was done during last winter. Considering that I need to clamp each row strake at least 10 hours. I can make the planking only when the humidity in the workshop is 35-40%, that is, during the heating season. Hoping to finish it this winter...