It's great to see the oldies live again. Well done Steve
@jimrio36289 ай бұрын
Steve, glad you got your neighbors machines. I really like the air compressor. I know you had this stuff for about a month now. The Oliver is real nice. Hey mate is that a perkins in the circus tractor like the Oliver. Jim
@stevesplacedownunder9 ай бұрын
Thank you mate
@stevesplacedownunder9 ай бұрын
Hi Jim. Yes I’ve had them about 3 weeks. The one in the circus tractor is an earlier Perkins and smaller. It’s a 4 cylinder in that one mate
@LuisDiaz-ms5rm9 ай бұрын
That's incredible how do you save all these old tractors Steve you're a great keep up the hard hard work that you do not a lot of people do what you do with these beautiful machines that you keep going and don't part them out or take them apart for no reason keep up the hard work and keep up the great videos!
@stevesplacedownunder9 ай бұрын
Thank you Luis. It’s a lot of work but they all deserve it. I don’t like parting them out because then they aren’t complete and are then useless. Thanks again mate
@Brad_The_Truckie9 ай бұрын
Real nice deal there some great bits of gear for the collection.
@stevesplacedownunder9 ай бұрын
Yes it was a great deal Brad. I’m very happy with it mate
@baldydbt14438 ай бұрын
Awesome content bloke as usual it's Dean again I'm a John Deere man but love all tractors especially the older ones and can't wait for the Oliver video cause I've got no knowledge on them and the way you always explain them is gold love your channel bloke
@stevesplacedownunder8 ай бұрын
Thanks as always Dean. I’m yet to get an old John Deere. They still go for more money than I can do just to sit it there though. I love all makes mate, especially older ones. I’ve never really worked enough of them over a long period of time to favour a particular one, but I do love chamberlain’s and Inters. Whether they were good performers though, I’m not sure but from what I do with them yes. All the best mate and thanks for the support
@billdyke97459 ай бұрын
That was fun. A Sunday afternoon, a beer, and some fine machines. That Austin truck is my favourite. Gorgeous. Hope that it finds a worthy hone. Good on ya, Steve. 🇬🇧👍 (p.s., this afternoon's beer of choice? Doom Bar from Sharp's brewery in Cornwall. An amber ale that is moreish and balanced. My experiment shows that more and balanced are in inverse proportion)... 🥴
@stevesplacedownunder9 ай бұрын
Hi Bill. Yes a few blokes like the Austin. It’s a shame it’s so far gone. The beer sounds good too mate. I’m sure it was lovely
@ktmtragic13979 ай бұрын
Thanks mate !
@stevesplacedownunder9 ай бұрын
My pleasure mate
@DAVIDWARBURTON-mu9ok9 ай бұрын
Great to see old kit being used and brought back to life. I just came across your channel here in the UK 👍
@stevesplacedownunder9 ай бұрын
Hi David, thanks for watching. Yes we like using the old stuff mate.
@robertstevison14489 ай бұрын
Awesome adventure brother awesome !!! Great to see your dad with and your mates thought it was going to be a bit tough but yall made it happen !!!! I would love to have either one of those trucks the white one is awesome the other one would make a great rat rod lol 😂 !!! Glad everything went well brother say hi to the Mrs your dad and mates !!! Yall have an awesome day ending another awesome adventure from my brother and sister from another country 😊😊😊😊😊😊
@stevesplacedownunder9 ай бұрын
Hi Robert. Those trucks are both yours if you want them. That may be a bit hard though. It all went well and you have an awesome day
Nice recovery, Oliver some green machine, thanks for sharing 👍💨💨
@stevesplacedownunder9 ай бұрын
Thanks Darren🙏
@darylstorer33699 ай бұрын
Well done Steve. You were going to get them through the gate come hell or high water then and there cobber. As you said, saved from scrap.🤠
@stevesplacedownunder9 ай бұрын
Hi Daryl. I’m very happy with it mate. Really good deal. Probably going to cost a bit to get them going but you don’t think of that🤣. All the best mate
@johnnicholls87219 ай бұрын
Steve, your integrity has my admiration! If i had the Cash and the Place to put them, I'd have them off you this second! Unfortunately i don't, so all i can do is hope they find a good home soon.
@stevesplacedownunder9 ай бұрын
Hi John. Thank you. Yes I hope they don’t go to scrap but it’s looking like it. I can only keep them so long as they will keep deteriorating. The Bedford isn’t too bad apart from the roof. The Austin is a bit far gone. As an only project it would be okay. Thanks again mate
@neilmcintosh12009 ай бұрын
One drove through under its own steam, can't be bad. None hit the gate post, can't be bad again.
@stevesplacedownunder9 ай бұрын
No it was fairly successful Neil
@davidbutterfield29499 ай бұрын
Great episode Steve, thank you 👍🏻🇦🇺
@stevesplacedownunder9 ай бұрын
Thank you David🙏
@tonynicholson33289 ай бұрын
Compressor with key and tag = mint!😅
@stevesplacedownunder9 ай бұрын
😅😅😅
@jeffdayman81839 ай бұрын
Great video Steve! Lots of excellent machinery in this one. Congrats on getting the Oliver going, and we saw some fine forklift wheelie action thru the fence at 46:00 ish. An old fella I used to work for had a similar Broome and Wade compressor - he always said "with this one we got a broom to sweep the dirt off so's you can wade thru the fuel leaks!". Like the little Austin dump truck. Cheers from Canada!
@stevesplacedownunder9 ай бұрын
Thanks Jeff. Yes it was a bit heavy that tractor when pulling it up that hill. I have a Broomewade here too that hasn’t yet made the channel. I will do a start on the Austin when I can
@nickhill33629 ай бұрын
Hi Steve I recon that Oliver could do with a days heavy work on some disc's it would clean that Perkins up mate
@stevesplacedownunder9 ай бұрын
Hi Nick yes mate it would come good I’m sure. I’d love to plough with it for the day.
@CHANANNAIRMOSHINGLEFAIRE9 ай бұрын
Bedford good rat truck.
@BarnyardEngineering9 ай бұрын
I love those old Aussie Internationals. When I win the lottery and buy my winter place in Australia, I'll be over to take a few of them off your hands, LOL!
@stevesplacedownunder9 ай бұрын
They are nice tractors mate yes. There’s plenty of them over here
@CHANANNAIRMOSHINGLEFAIRE9 ай бұрын
So many next door🤣i'm the local hoarder round here. Always asking "when your ready to sell" then keep driving by on my way home.
@stevesplacedownunder9 ай бұрын
He knew where they should be🤣
@cantwellron119 ай бұрын
Got .y liecence in J model Bedford was fairy new at time CHEERS
@stevesplacedownunder9 ай бұрын
Gday Ron that’s great. They are a good little truck I’m sure mate
@nigelgwillim6449 ай бұрын
got 1800a and 1900a in uk nice beasts
@stevesplacedownunder9 ай бұрын
Hi mate this is good. Yes I’m sure they are great machines
@danielflinn35719 ай бұрын
drove Leyland Hippo back in70 logging East Gippsland 680 power plus
@stevesplacedownunder9 ай бұрын
Hi Daniel this is great. I believe they were a great truck in their day
@Gugernoot9 ай бұрын
Recently bough a c670 yeah with the placement of the rear wheels it's a bugger in get in on the drivers side compared to a 9g.
@stevesplacedownunder9 ай бұрын
Hi mate yes I find it hard to with the gear stick in the way then getting under the steering wheel isn’t as easy as I’d like it to be. Great tractor though
@stevesplacedownunder9 ай бұрын
It’s in really rough shape and how would it get there? I’m not sure it’s worth it for what I’d get for it
@grzesnet9 ай бұрын
Hi Steve, great video, I like the way you talk. For me, such machines are a bit exotic, we don't have such machines here. Although we have Perkins engines. Please tell us how to contact you regarding Zetor 4911? I'd like to purchase it from you.😀
@stevesplacedownunder9 ай бұрын
Hi mate thank you. What tractors do you have there? The 4911 is in very rough shape. How come you want that one?
@grzesnet9 ай бұрын
@@stevesplacedownunder Hello, first of all I wanted to buy Bucket Hat in your online shop. When will it be available? You just have to add shipping to Poland. On my small farm, I have a Zetor 3011 tractor from my father and later I bought a Zetor 6945, both of them have a cabin and I have a problem with working in the garden. Sometimes I also need to go to the forest. The Zetor 4911 is between the ones I have in terms of power. In Poland, parts for Zetor or Ursus are available in stores, just like milk is available at your place. So there are a lot of parts at affordable prices. I also have some spare parts for your model. And this is a factory model without a cabin. This model is rare in Europe.
@sambo90689 ай бұрын
Is the dozer next thru the gate Stevo ?
@stevesplacedownunder9 ай бұрын
Mate it would have to be very cheap. She’s fairly gone. A lot of rust and a few parts missing
@sambo90689 ай бұрын
Should fit right in next to the HD7 mate
@stevesplacedownunder9 ай бұрын
Yeah it would. It’s a bit bigger. It’s actually a Hitachi. A copy of an earlier Cat D6
@CHANANNAIRMOSHINGLEFAIRE9 ай бұрын
Hardest part starting a old girl, battery-power.
@stevesplacedownunder9 ай бұрын
Yes it is John
@adamheazlett11799 ай бұрын
What sought of money for the trucks
@stevesplacedownunder9 ай бұрын
Just scrap value I’d say
@CHANANNAIRMOSHINGLEFAIRE9 ай бұрын
I need rear tyre, tube for my Champion Industrial mk4 how much should I pay. You got sell? How much to Laidley4341
@stevesplacedownunder9 ай бұрын
I’ve got another to go and pick up that needs these tyres. I’m hoping to get it anyway
@R.Sole881099 ай бұрын
Good on ya for saving them and being closer to the 100 end goal.🍻 Cheer up mate, I'm still watching all your mint videos and letting the adverts run so you can get $00.01c from the youtube pricks making billions.😜
@stevesplacedownunder9 ай бұрын
Thanks as always mate. It’s getting closer yes indeed. Did you get your package?
@R.Sole881099 ай бұрын
@@stevesplacedownunder Not yet mate, I haven't payed His Majesty's Robbing Cunts custom charge of £131.80🤬 cos I've got a couple of bills higher in the pecking order due.