The ULTIMATE HIGH SPEED Tokyo Marui MWS Build Guide

  Рет қаралды 21,787

Ollie Talks Airsoft

Ollie Talks Airsoft

Күн бұрын

Пікірлер: 115
@TCGkindaguy
@TCGkindaguy 2 жыл бұрын
I am brand new to airsoft and love the idea of the customisation factor to the gear you run, this content is phenomenal for what I am looking for.
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Thanks buddy, yeah gas rifles are the way forward for having the most fun!!
@nicholashanna5722
@nicholashanna5722 9 ай бұрын
Hey man, Airsoft was huge for me growing up you are awesome and loved dearly here and up above :)
@tannerhagen774
@tannerhagen774 8 ай бұрын
Holy shit, I was just looking into getting into airsoft and this is next level stuff. Love it!
@jakecolquhoun6427
@jakecolquhoun6427 2 жыл бұрын
Already excited bud 👍, keep em coming. Best regards from dartford 😎 Jake
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Thanks buddy, my nan used to live in Dartford, (well Bexley) before I got into Airsoft I used to work on the Swanley New Barn Railway 🤣 small world!
@jakecolquhoun6427
@jakecolquhoun6427 2 жыл бұрын
@@OllieTalksAirsoft mad, I come through bexley on a daily getting into London. Small world it is. Out of all the people you finally tipped me over the edge to get an MWS, and dump we tech once and for all lol Keep the knowledge coming bud 👌 👍
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Glad I was the one to tip you over the edge 🤣 hope you're enjoying it, but to be fair its hard not to when it just works!!
@imBugra
@imBugra 2 жыл бұрын
When you uploaded the previous video, I wished there was the opposite of it, aiming on increased RoF. Thanks, this is a beast.
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Happy to help 😎
@sleeperawake9818
@sleeperawake9818 2 жыл бұрын
Excellent info! I had the bolt setup already, so I added the spacers to short stroke and used my TM mags with the AMG HOV and Guarder airtight rubber. Watched this and then it took 2 minutes to get insane speed! Wow, I gotta find the chrono... Thanks for all the great info and demonstrations!
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
No worries, I love messing about with the guns and seeing what's possible and even better when I get to share it with you guys 😁
@sleeperawake9818
@sleeperawake9818 2 жыл бұрын
@@OllieTalksAirsoft I'm excited to see what your Bucking experiment shows. you listed so many buckings I couldn't remember them all. I've used the Maple Leaf and Modify buckings and am not happy with either.
@robweaver9763
@robweaver9763 2 жыл бұрын
Thank you for all helpful vids! My MWS is coming tomorrow because you!
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
🙈 Sorry!! but you'll love it!!
@robertserrano8992
@robertserrano8992 2 жыл бұрын
Where did you find it?
@buff771
@buff771 2 жыл бұрын
Excellent as ever thanks Ollie please keep up your good work 👍
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Thanks buddy I appreciate it 😁
@tristancox7886
@tristancox7886 2 жыл бұрын
Super interesting video keep up the good work!
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Thanks buddy 😊
@RazorNLD
@RazorNLD Жыл бұрын
Do you have a link towards the 'high speed nozzle' ? I cannot find the right one. Would be a great help :). Or better yet: Can you make a part list of the stuff you've used in here? I would like to make a similiar build on my MWS.
@pinoyteam6417
@pinoyteam6417 2 жыл бұрын
Tyvm for this video. My 1st gbb is the kwa mp7. But I finally bought the tm m4a1 mws last year. I haven't done anything to it because I was unsure what I could do to mine. I'm wondering if there is way to get a list of all the parts, not mags, used to make your mws 20 rps? And how much you actually buffered? I'm looking to to the work myself. I'll try my hand at gbb, but for now any aeg rifles I bring to my local shop. Any info you give will be greatly appreciated. Thank you for your time.
@jamesbenson1370
@jamesbenson1370 Жыл бұрын
Broooo that’s dirty! I’m getting my MWS like this! 🤣😭
@jamesbenson1370
@jamesbenson1370 Жыл бұрын
Btw where can I get an F1 bolt from? Only one I’ve found is Evike in America and you need a license to import it
@Ryndel
@Ryndel 9 ай бұрын
Great vid! Working on my high speed set up now. Thanks for the time you took for this. Do you know who sells the polymer end caps by chance?
@MrFROGY1313
@MrFROGY1313 2 жыл бұрын
Not a big fan of ARs but very funny to see one with 25rps xD nice job
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
yeah nuts right!!!! I reckon with some more tinkering I can get up to 30 🤓
@GooseinTheCabooseProductions
@GooseinTheCabooseProductions Жыл бұрын
Hey Ollie, I've got a mtr G editition I bought second hand. Where would you start with upgrading the internals. Running Propane instead of green gas and want to get it to to where it kicks hard and shoots fast. Where would you start?
@xmastersrule
@xmastersrule Жыл бұрын
Hi i have a question about my stock tm MK18 so i run a stock mk18 but the nozzle wont stick in the barrel if i have no mag in it an was wondering what could cause this? (sorry for the bad spelling got dyslexia)
@patrickhuynh2501
@patrickhuynh2501 2 жыл бұрын
Nice! I would definitely recommend though to stay away from the MWS drum mags. They are incredibly hit and miss with regards to the loading mechanism inside. I've heard of many of them breaking very quickly, including mine. Also, if you use them with green gas, it's incredibly wasteful and will kill your efficiency and introduce a lot of cooldown.
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
thanks for the tip, ill keep working on my reloads then 🤣
@pawelnieczuja-ostrowski1029
@pawelnieczuja-ostrowski1029 Жыл бұрын
If you HPA the gun using a mag well adapter, you could run MP5 mid or high caps. It’s probably more reliable than a drum mag. But you could HPA tap the drum mag… if it’s a reliable one
@leobates8783
@leobates8783 2 жыл бұрын
Thanks bud 👍🏻🇨🇦
@Patriusprimus
@Patriusprimus 2 жыл бұрын
superb vid :D
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Thanks Buddy 🥳
@MrSuperAbsinth
@MrSuperAbsinth 11 ай бұрын
which magnifier do you use? and what mount is sit?
@cx3264
@cx3264 Жыл бұрын
Do you use real Eotech or replica? I found replica will be broken when I used it on MWS GBBR as recoil caused shocks
@runzhuhe4766
@runzhuhe4766 Жыл бұрын
hey Ollie, thx for your vids, huge help to a new MWSer, just wanna ask if there is any other bolt is under 100g ? bcs I cant find any F1 in Europe. thx.
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
I think iron airsoft make the lightest ones
@FandyIPSC
@FandyIPSC 2 жыл бұрын
hi.. like to watch your mws video.... just want to ask your opinion... G&P or angry gun bolt better? or what other suggestion? thank you
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
Probs g&p over angry gun. Check out hao, for the price they're pretty decent
@awkwardairsoft7451
@awkwardairsoft7451 Жыл бұрын
What rail and flashhider do you have installed?
@nayogonzalez2961
@nayogonzalez2961 2 жыл бұрын
Hello, please I have a question for you. I have a Tokyo Marui MWS with standard recoil and I want to put a red dot sight. Do you recommend a real one or a copy? I saw a real one in a gun store, it's a Vector Red Dot Omega 8 Reticle/SCRD-04. Thank you very much.
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
It all depends on what you want and how much you play, if it's a lot you want to go for something with a warranty on it, if it's just for backyard plinking then a cheaper optic will usually stand up fine to Airsoft recoil
@Nguyernilova
@Nguyernilova 2 жыл бұрын
Hey Ollie! I’m new to mws platform. I was wondering if you would go with a guns modify mws or a stock tm mws if they were around the same price? Any help would be grateful! Thanks!
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Personally I'd go with the stock one, they're so good out of the box and you'll have a world of support with KZbin and the TM discord group. The Guns Modify versions are cool but I'd go for the full TM experience and get one from new. If the GM was cheaper then I'd probably go for that instead but for the same money standard TM is better then the best AEG you've ever fired!
@sylithics
@sylithics 2 жыл бұрын
Love it 👍
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Thanks 😁
@sjs9976
@sjs9976 2 жыл бұрын
What is your magazine? Is that gunsmodify?
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
Yes it is
@rayndown
@rayndown Жыл бұрын
Do you know what company makes the best MK4 rail for the MWS?
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
Dytac are usually pretty decent but if HAO made one then that will be the best. Also the MK4 was one of the only rails to be made in "federal" green, it's a cool look and pretty different. Check places like JKarmy and wgcshop as they're most likely to have them , shipping to the UK usually isn't too bad either.
@rayndown
@rayndown Жыл бұрын
@@OllieTalksAirsoft Thank you! Asked HAO if they were making one but sadly they said they weren't
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
Dytac will be the best one then
@yh_l1556
@yh_l1556 2 жыл бұрын
You are actually building an MG42 lol. Have you seen the SP system super high-speed bolt? I don't know how heavy that bolt is, but in its demonstration video released by the SP system, it looks really fast. It even drilled two holes on the bolt, that could allow the gas exhaust out when it's halfway cycling, which meant the nozzle could pick up a round reliably. You might try this method on your F1 bolt as well, I guess it could bring the ROF even higher.
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Ive not seen it but I will check it out, thanks for letting me know! I was thinking about drilling the holes in one of my bolts to add more realism but wasn't sure how it would affect the performance as they aren't cheap so ill definitely have a look into this. thank you 😁
@dominiksutherns384
@dominiksutherns384 2 жыл бұрын
Hey bud, thanks for the great content! I've been looking at getting the angery gnu high speed bcg (no g&p in stock anywhere uk side :/ ) how did it fair up over the stock bolt? Did the steel hammer reset hold up? Cheers!
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
personally id be looking overseas to get what you want. AG bolts have a few horror stories attached to them but they are complete which is nice, the power adjustment on them is iffy at best but easy enough to replace the internals of the bolt. id be more likely to go for an Iron Airsoft lightweight from shootercbgear in Hong Kong or a HAO directly from them in Taiwan, Angry Gnu are just not that good. but if you need it like this week and have to order from the UK it will work but its not as drop in as you would hope, my friend Alex brought 2 and I think only 1 is working properly so that's 50%, a risk. but complete, its a tightrope buddy!!
@dominiksutherns384
@dominiksutherns384 2 жыл бұрын
@@OllieTalksAirsoft thanks ollie, I was only going to get the bolt and swap out the internals anyway with the reinforced nozzle, ratech or g&p npas ect. Have you tried the orga bolts at all?
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
no but I want to try their NPAS as apparently its really good.
@fsdffdsgfdg8295
@fsdffdsgfdg8295 2 жыл бұрын
Hi again, stupid question maybe but this spring i think it's from the rear like the big spring that devolpe recoil has a rattling noise in my brothers mk18, is there a way to make it go away? I think it has increased a little bit over time, almost as an old bed (wring wring)
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
You can put some grease on the spring and it'll dampen the springy sound, real guns have that issue as well with the twangy buffer spring
@witcheddoctor2720
@witcheddoctor2720 2 жыл бұрын
hand guard? obv it's a geissele but specific other company thank makes repros?
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
This is a MK2 Mod1 so no repros available for this one. I know Dytac repro mk4s which are similar.
@charliepastrana816
@charliepastrana816 2 жыл бұрын
Would any 270mm inner barrel work with the mws m4a1? Cause I'm adding a 10 inch outer barrel on mine, but I can't any 270mm inner barrel for it.
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
I think you'll need to be looking for a 250mm as that's the stock and cqbr length which is 10.3 inches. You'll need a GBB/VSR cut window inner barrel too.
@JohnH5528
@JohnH5528 Жыл бұрын
Re-watching this - during the slowdown video, I noticed that the mags tend to wobble about a bit (never noticed before) - can that cause performance issues?
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
yes it can cause inconsistencies in the FPS, the GM mag works best as it moves the least.
@RBH81
@RBH81 2 жыл бұрын
Hey Ollie Great video, as always. I have a question for you. I have a Volante Airsoft nozzle just like you. But I prefer a high speed bolt setup, but the Volante nozzle only fit in my stock bolt and not the lightweight AG one I have. So, was wondering what bolt you use yours in and if you know of any lightweigth bolts that will take the Volante nozzle, so that I don't have to waste my money? And have you changed the valve in the Volante nozzle, if so, to what?
@sleeperawake9818
@sleeperawake9818 2 жыл бұрын
In his video about Heavy Recoil Setups he has it in the steel MWC (Model Work Custom) bolt
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Sleeper is right I'm using the MWC bolt, I've not tested it in the other BCG's but I can. Other than the nozzle return spring being GM I'm using the volante nozzle with their rocket valve and rocket valve spring.
@RBH81
@RBH81 2 жыл бұрын
@@OllieTalksAirsoft when you say their rocket valve and rocket valve spring, you mean the units delivered with the nozzle itself from Volante? And should you find the time to test, in which bolts the Volante nozzle fits, that would be awesome. Also what brand would you recommend for a lightweight bolt?
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
@@RBH81 yeah
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
And anything but angry gun, probs HAO
@Patriusprimus
@Patriusprimus 2 жыл бұрын
Hi. Wonder what buffer should i go for ro reduce fps... can u plz link it :)
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
No buffer will reduce the FPS as the BB is fired before the gun recoils, you will need to look at one of the following; the rocket valve, rocket valve spring, gas you're using, inner barrel length and inner barrel diameter.
@Patriusprimus
@Patriusprimus 2 жыл бұрын
@@OllieTalksAirsoft huge thnx You are my Guru :)
@pierremarquier8457
@pierremarquier8457 Жыл бұрын
Salut superbe vidéo !! Je n’ai pas compris d’où proviennent les tempons violet ? Il est possible de les utiliser avec un buffer d’origine ? Merci pour tes réponses !! Le bonjour de France !!
@future_phonk
@future_phonk Жыл бұрын
Do you have links to the parts used?
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
its really just a lightweight bolt and putting spacers in the buffer tube, even the stock bolt can move very fast with enough buffers!!
@bobotea1234
@bobotea1234 2 жыл бұрын
do you know if this increases your gas efficiency and cold weather performance?
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
yes, lighter setups are way better for cold weather.
@HitomiNee
@HitomiNee 2 жыл бұрын
Is it possible to create a better than average gas efficiency with a lighter bolt, but still have a nice heavy recoil with a heavier buffer?
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
probably the best setup for that balance is the stock setup, heavier bolt and lighter buffer. you could add some extra weight to the back of the bolt like the HAO steel extension and use the stock buffer and you'll get a bit more recoil but the ROF won't fall too much.
@richcoughlan
@richcoughlan 8 ай бұрын
❤❤
@mattworley7043
@mattworley7043 Жыл бұрын
Lightest current available setup?
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
for the internals yeah I reckon its the lightest moving parts I can get.
@jackhenry8816
@jackhenry8816 2 жыл бұрын
Could you do a similar video but for max general & cold weather reliability/performance?
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
I did a cold weather video about a year ago but it doesn't cover max reliability which I think would be a good one. Thanks 😃
@dr.martensH8
@dr.martensH8 Жыл бұрын
the high speed bcg from AG is good option for start?
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
Yes but the biggest thing to speed up your setup is short stroking by putting spacers in the back of the buffer tube.
@dr.martensH8
@dr.martensH8 Жыл бұрын
@@OllieTalksAirsoft i put a bunch of coins ahahah likr one of your videos , but maybe try to seaech some silicone spacer
@dr.martensH8
@dr.martensH8 Жыл бұрын
@@OllieTalksAirsoft i search and read a lot and all reviews from angry gun high speed , (i heared all bad opinions)are from years ago , i hope the AG guys fix the issues from years ago..
@dr.martensH8
@dr.martensH8 Жыл бұрын
@@OllieTalksAirsoft i lookimg for short stroking now , you recomended some one? btw the nozzle return spring 130%g&p is good choche too to improve BCG?
@TehSuperWaffle3000
@TehSuperWaffle3000 2 жыл бұрын
i JUST bought an angry gun high speed & heavy recoil bufffer last night at 4am, then i wake up to this what is this sorcery!?
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
Well I love the heavy recoil setups the most so im sure you won't be disappointed 😁
@TehSuperWaffle3000
@TehSuperWaffle3000 2 жыл бұрын
@@OllieTalksAirsoft I wonder how many people you've convinced to buy an mws, mine just came in a few days ago from fire support which included a 3 spare mags, and i got the last one in stock!
@tristancox7886
@tristancox7886 2 жыл бұрын
@@TehSuperWaffle3000 same!
@TehSuperWaffle3000
@TehSuperWaffle3000 2 жыл бұрын
@@tristancox7886 really!? Good night last night I went home at 3am n did some drunk shopping
@tristancox7886
@tristancox7886 2 жыл бұрын
I didn’t get mine from fire support but I just recently bought mine with a three mag kit because of his channel and I can say the thing is a beast!
@dr.martensH8
@dr.martensH8 Жыл бұрын
what mags u use?
@dr.martensH8
@dr.martensH8 Жыл бұрын
its indispensable a gas block for mount a urgi handguard?
@OllieTalksAirsoft
@OllieTalksAirsoft Жыл бұрын
the hand guard is a real Geissele Mk2 Mod1 9" the gas block is a repro BCM I believe, im using guns modify p mags mostly as they're the best aftermarket
@dr.martensH8
@dr.martensH8 Жыл бұрын
@@OllieTalksAirsoft i just bought original pts handguard , and boe i need a gas blck too hahah i think i use the new gen pmags with visible bullets effect
@jordan-hr5pn
@jordan-hr5pn 2 жыл бұрын
ollie you should start working/upgrading on other people's mws's 👍
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
id be worried about damaging someone else's gun, my ones I don't mind breaking and scratching up 🤣
@FXTRT1-1
@FXTRT1-1 2 жыл бұрын
Allthough i got my MWS into an DDM4v7, im still jealous of you guys having Full-Auto ;_; aint possible over here in Germany....shooting an MP7 in Single is boring xD its MADE for being shot in Full...damn laws.
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
I need to do a video on how to bump fire 😏 p.s. I love Germany, my brother lives in Klon, you guys are the best!
@FXTRT1-1
@FXTRT1-1 2 жыл бұрын
@@OllieTalksAirsoft Haha yeah, i tried it once, failed....thanks mate! We do our best...i guess xD
@xukelho
@xukelho 2 жыл бұрын
Do you have an Instagram to answer a few questions?
@OllieTalksAirsoft
@OllieTalksAirsoft 2 жыл бұрын
sorry bud I don't have any socials, I did this channel as a mental health project, what's your questions?
Tokyo Marui MWS M4 - 4UAD Grading System Challenge
13:04
4UAD SmartAirsoft
Рет қаралды 121 М.
TM MWS Bolt Overtravel, lets talk about it
11:57
Ollie Talks Airsoft
Рет қаралды 13 М.
World’s strongest WOMAN vs regular GIRLS
00:56
A4
Рет қаралды 6 МЛН
Family Love #funny #sigma
00:16
CRAZY GREAPA
Рет қаралды 17 МЛН
Каха и лужа  #непосредственнокаха
00:15
Guns Modify PMag for the MWS (Marui)
26:14
Ollie Talks Airsoft
Рет қаралды 20 М.
This upgrade may BREAK your Airsoft Gun
24:42
Ollie Talks Airsoft
Рет қаралды 16 М.
Tokyo Marui M4 MWS (TM M4A1 MWS) with ANGRY GUN COMPLETE MWS HIGH SPEED BOLT CARRIER WITH MPA NOZZLE
23:42
Tokyo Marui MWS GBBR MK18 Build Tutorial
7:44
NormalRoy
Рет қаралды 9 М.
Guide for installing a new Nozzle in a Tokyo Marui MWS GBBR (Airsoft)
15:44
Ollie Talks Airsoft
Рет қаралды 18 М.
Tokyo Marui MWS Broken Nozzle Spring Repair - How To
11:57
Jaeger Precision
Рет қаралды 11 М.
World’s strongest WOMAN vs regular GIRLS
00:56
A4
Рет қаралды 6 МЛН