You are cruising in the water and all of a sudden you stop because your propeller flew off. Do you know what to do if that happens? Watch and share my video and you will be prepared.
Пікірлер: 37
@MARRMIAАй бұрын
All I could say is thank you for this amazing video!! First time doing this and I was able to accomplished it with your tutorial!! God bless you!! 🎉🎉🎉🎉🎉
@tutmamma6 жыл бұрын
Finally...a video specific to a Volvo Penta Propeller replacement. Nicely done...thanks!
@michaelromer20166 жыл бұрын
Joe, Thanks for your comments! If you like this one, check out this 4 blade prop. upgrade video. I'm also ramping up lots of videos on for the Volvo specifically. kzbin.info/www/bejne/oaDMgH6Go86Aoc0
@ylandawilhite76906 жыл бұрын
Right
@mannyruiz90113 жыл бұрын
Thank u brother, it was so easy i feel like a mechanic , God Bless u.
@glenweaver88445 жыл бұрын
Excellent! Thank you!
@Delaware-lk5vk5 жыл бұрын
Thanx great instruction
@joelsilkett81225 жыл бұрын
Well done, thank you!
@michaelromer20165 жыл бұрын
Thanks for comments!
@leonardoortiz74254 ай бұрын
Thank you great vídeo
@michaelromer20162 ай бұрын
Glad you enjoyed it
@rickcastrejon64542 ай бұрын
Hey Mike, I have a 1995 four win with a 5.0. Where do you find parts for the out drive? Thanks in advance
@benb58916 жыл бұрын
Where I can get that thrust bushing ?i lost my propellant on the penta 4.3 gl and lost all of it. I got all the washer and clip and new prop..but it doesn’t come with the bottom thrust brushing.
@michaelromer20166 жыл бұрын
vansaleum bounyarath What year is your stern drive?
@peterfettig86662 жыл бұрын
I just bought a 1994 Four Winns with 4.3 Cobra Drive. The seller had the prop off and tried to find one for the boat before I left. A couple of the props we tried had splines that matched up but seemed like they wouldn't go all the way down on the shaft and seat close to the lower unit. The gap was 3 or 4 inches. When I got home I tried some props I had at home but the same thing happened. They just don't seat all the way down on the thrust bushing. Thoughts?
@fredcombs5983 жыл бұрын
I have the same drive on a new to me boat. Current prop is a mercruiser. I bought a Solas and the thrust washer does not fit (way too small). Is that an oem thrust washer?
@richardo67162 жыл бұрын
Great video. Do you have a part # for just the thrust washer for a 2005 5.7 volvo penta?
@michaelromer20162 жыл бұрын
Check out this link. How-to Find Boat Parts kzbin.info/www/bejne/pqalYnitZpyghKs
@ProfessionalDad3 жыл бұрын
Looking for info on the rubber piece in the middle
@derekdgarcia15 жыл бұрын
Good video man I appreciate it
@michaelromer20165 жыл бұрын
Thanks!!
@duuurs4 жыл бұрын
So I have a 1986 omc cobra with a 5.7. Took the prop off for winter. I have all hardware except the spacer that goes between the prop and the castle nut. Any idea of a part number or the correct kit to buy?
@michaelromer20164 жыл бұрын
Visit crowley marine for a part break down.
@duuurs4 жыл бұрын
@@michaelromer2016 thank you
@khaze315 жыл бұрын
Thanks Michael! Will be trying this tomorrow, as I hit something I couldnt see, and it ripped one of the blades apart-- Quick question, it also took my skeg out with it too.. do you recommend skegguards or have them welded on?
@michaelromer20165 жыл бұрын
Here is my main concerns at this point. Your propeller shaft is out of round. Buy this: www.grizzly.com/products/iGaging-1-Dial-Indicator-with-Vise-Grip/T24806?gclid=Cj0KCQjwoInnBRDDARIsANBVyATAgXLcs2rzgtOt2e_HEYLVtqZANXX6qgguTbMnh1EZq9JOkaFl1ysaAtmlEALw_wcB You need to remove your prop and check and make sure your propeller shaft isn't out of round by more than 4 thousandths. If it is, that needs to be addressed, as it will wreck you lower unit. You put the dial indicator up against the shaft and spin the shaft by hand, keep an eye on the dial. AS for the skegguards , welding isn't recommended. If you hit the skeg again it will just sheer off your skegguard and you can buy another one. If you weld it, the next thing you hit will likely rip off something higher than the weld.
@yannih17823 жыл бұрын
New cotter pin every time!!!
@michaelromer20163 жыл бұрын
It’s a great practice!
@powpow985 жыл бұрын
Hey do you have the part # for that propeller?
@michaelromer20165 жыл бұрын
There is a lot that goes into figuring out what prop you need. Start here: www.solaspropellers.com/index.php/products/prop-finder Mine is OE4216
@jorock8055 жыл бұрын
where can I buy that bearing kit?
@michaelromer20165 жыл бұрын
Throw those part numbers I mentioned in Google
@baldodiaz55853 жыл бұрын
The what website?
@caddiman98344 жыл бұрын
Holy shit son... whats da deal wit da rope on a wrench?🤔
@michaelromer20164 жыл бұрын
You already know where I learned that technique.
@wolfgangeckhardt09022 жыл бұрын
Hallo Michael kannst Du mir bitte die genaue Nummer und Größe des Propellers mitteilen . Danke
@michaelromer20162 жыл бұрын
Wolfgang, check out this video. How-to Find Boat Parts kzbin.info/www/bejne/pqalYnitZpyghKs