She does need an alignment. Plus ball joints and new tires.
@OFFICIALBROTHERBOLDLYMUSICTV11 ай бұрын
It’s been a year bro how’s life going?
@itsink675411 ай бұрын
@@OFFICIALBROTHERBOLDLYMUSICTVit’s been 12 days, how’s life going?
@OFFICIALBROTHERBOLDLYMUSICTV11 ай бұрын
@@itsink6754 thanks for asking Not well bro bc I just broke my 72 day streak of SR and I’m getting back on my journey How’s your life going bro?
@OFFICIALBROTHERBOLDLYMUSICTV11 ай бұрын
@@itsink6754 I’m glad your alive man you never know if some ppl are still alive after a year and no response, kinda eerie
@anorsegoddess979711 ай бұрын
Thanks captain obvious
@killroy36072 жыл бұрын
I see this all day every day! And the worst part is they will decline all work needed including the alignment and go somewhere else that will do just the alignment... and we drive with these people al around us...
@lou9148 Жыл бұрын
That’s America for you
@whitehorsas Жыл бұрын
Its impossible to do alignment with loose joints. In Germany they would not allow to tale that car back, it would be illegal.
@elguerokabron Жыл бұрын
@@dannym5865hat would cause a tie rod to snap? The ball joints? Because my front driver side did one time and the front wheels locked up when i would stop
@tylerb3023 Жыл бұрын
@@dannym5865 Yet you still deal with drunk drivers and people who text while driving. You are never safe on the road my friend, that’s life for you
@Sakura-ke3th Жыл бұрын
If only mechanics charge reasonable prices.
@Proj3ctLife Жыл бұрын
I lowered my car and changed all 6 rear arms to adjustable arms, front upper control arms to adjustable ones along with new bearings, hubs, ball joints and even extended wheel studs. Ive been driving my Acura without a radio on for about 4 months because I carefully listen to EVERY and ANY sounds that come from my work. Im proud to say that the car drives like a fkn dream ❤ I love my car, my truck and my motorcycle and any sounds that arent vroom vroom make me sick
@supremeYTofficial11 ай бұрын
Bro can you help me the the wheel is broken on the driver side and does not roll anymore you know what I need to replace ?
@Proj3ctLife11 ай бұрын
@@supremeYTofficialwhat kind of car is it
@Tbag3055 ай бұрын
I want to do the same how much u spend in total
@Proj3ctLife5 ай бұрын
@Tbag305 The camber kit was cheap from Sped D at about $160. The front upper control arms are from Megan Racing and they were about $270. The bearings front and back ran me a total of around $400 because it was from Acura and the Axles(also factory) ran me a total of over $700. The ARP extended studs are listed for a Civic Type R, that ran me about $240. Cant recall what the front lower ball joints and cost me. New parts: I ordered drilled and slotted rotors, akebono performance pads and powerstop rotors that totalled to over $1000 and my the wheels and tires(bought 2 years ago) ran me about $3000. It gets expensive. Im almost $6000 in on my suspension 😳 Edit: my BC Racing DS coilovers with Swift springs were 1800. Do the math 😂
@Tbag3055 ай бұрын
@@Proj3ctLife fak, ok thank u . I’m about to get into the same thing
@franktags1362 жыл бұрын
I dread thinking of how many vehicles are on our roads now with issues like this. Scary..
@volvo092 жыл бұрын
A lot! I used to commute about 80 miles a day, and then drove a box truck for a few years. I saw quite a few cars on the side of the road after a good bump or pothole with the wheel folded in or out from an upper or lower ball joint finally letting go.
@franktags1362 жыл бұрын
@@volvo09 that sucks !!
@KohnCampell4 ай бұрын
That’s why I keep my distance from everyone, IDGAFK who doesn’t like it..
@KenBober2 жыл бұрын
The big rims are more important than safety to some people.
@804MRMAN11 ай бұрын
Those "wheels" came on the car stock goofy 😂😂😂
@NJHC217 ай бұрын
@@804MRMANno they didn’t.
@byronrichards30015 ай бұрын
Awesome up load my Guy, now I know how to inspect vehicle for bad ball joints. Keep informing the people...
@oriontech922 жыл бұрын
Ill tell you one thing......i removed one of those "non removable" ball joints from my 07 ram 1500. And got dayum, boy im telling you......sounded like a 50cal firing off right next to you when it finally gives.
@huanweili76992 жыл бұрын
I'm dead... laughing at the red caliper plastic cover. Hahahaha 😆 😂 😆
@defritzel Жыл бұрын
and those things are expensive
@volvo092 жыл бұрын
Good job checking it out... I've seen shops just "do what the customer said" without questioning why.
@PhillyDee2152 жыл бұрын
Crazy thing is those customers that see this but still don't get the work done
@ballershanelle2 жыл бұрын
because it should have been caught before it got this bad.. Inspection guy should have told her in the next year get this done.. they visually inspect it... u can see and feel it. noone wants a dealer $$$. I would find shade tree and get all of it done.. front and back...
@andylevingston1611 ай бұрын
Because these repairs be expensive, I just paid $1600 yesterday to have my car fixed. And now I’m having a wheel bearing issue or something on my driver side front wheel
@Sun-el3zn11 ай бұрын
@@andylevingston16 they don’t fix shit dawg besides tell me why I left the shop one day after I got my tires put on and anytime I turned the ac on it would make this weird flutter noise didn’t do that until after I left the shop.
@Carlitosway21111 ай бұрын
@@Sun-el3zn Oh, and you're an "eversincer"! What a surprise. You sound like one of those snakes that tries to scam shops out of free work. "EvEr SiNcE yOu PuT mY tIrEs On My Ac MaKeS nOiSe" Gtfoh
@Shiesty916811 ай бұрын
I got quoted $4195 to replace 1 strut and a lower control arm with a Knuckle well I got all those parts myself for less than $1k and worked on it my self for free of course😂
@investmince1597 ай бұрын
I had replaced my own for play. Yet another great diag video.
@Jason-un9ps8 ай бұрын
Homeboy said FK the ball joints, I'm still paying off these rims and pretty red calipers
@justj2728 Жыл бұрын
People that drive cars like this are a danger to us all 😂
@eversalinas8728 Жыл бұрын
This guy legit! I wish he was near my area. Last week took my 2016 f150 for broken ball joints, turned out I also need upper control arms. No biggie got extended Warranty. Shop took a whole week claim warranty was slow to process, mean while the whole time I was communicating with the warranty. Besides that lie, when they finally gave me my truck, a lil bump on the right side turned into a wabble within 3 days, plus tire would rub when turning to the left or reversing. Took it back, owner didn't even want to put it on the rack. Said they could move my tire but it was going to be at an angle where my tire would waste more quickly. Other solution was to CUT piece of steel where tire was rubbing for a charge of course. Even though when I took it in with broken control arms and ball joint there was NO rubbing. After extensive research, took it to a shop with over 50 yrs of doing alignment where I was billed $150 for alignment and finish installation of said control arms and ball joints. Even the worker at that shop where mad at the injustice told me to go back and ask for my money, to tell them it's cheaper than to the consequences that would've happen to me and my family. Mindful, workout any fancy modern machine, with just good old strength and gages. Truck runs straight, no rubbing, or death wobble and steering wheel straight.
@Jamal2fresh8 ай бұрын
Literally driving till the wheels fall off 😅
@Icn_atitagain10 сағат бұрын
“Fancy wheels, whoaaa man”🤣💀🤦🏾♂️
@john1genius9 ай бұрын
Just had to do my arms and ball joints, bloody awful roads they were in excellent condition about 4 months ago!
@brotha19842 жыл бұрын
They gonna need more then just a plain alignment job 🤷🏿♂️🤦🏿🤣😂😂🤣🤣😭
@BahnGop8 ай бұрын
Just a little bit of play lol
@bulldogmack6 ай бұрын
Customer declined repairs at this time 😂😂
@chind0na Жыл бұрын
If you’re reading this and drive a Chevy that shudders or shakes periodically, get a transmission flush. There’s a service bulletin addressing this. Of course, check your brakes and rotors.
@universewonders12 жыл бұрын
Customer be like, it has a small knock when going over. Bumps
@stevenhaske6932 жыл бұрын
Man I laughed to hard I make the same noise oooohhhhh when I find something wrong lol
@YourDriver1017 ай бұрын
Photholes and speed bumps
@ericmontanez72766 ай бұрын
And they be thinking they pimpn!!
@thegreataquarius37495 ай бұрын
Warped rotors also cause vibration when braking heavy. I had a 01 Buick LeSabre that the lower control arms completely gave out on me. Let's just say that the car is on borrowed time.. One big pothole and in the ditch you go!! I hope they get it fixed. It's not safe to drive like that. 🇺🇸 1st 4ever
@kennyd67386 ай бұрын
This looks like my Rav it started making noise around Christmas choose to get my kids Christmas by the time I could afford it them wheels were barely hanging on lol total new front end and two tires all the toys I bought for Christmas are lost or broken. Dad life.
@willperez7930 Жыл бұрын
Thats a lot free play. Sheesh!
@TheSupart916 ай бұрын
All those *ooopies* added up 😂😂😂
@joelh303010 ай бұрын
A customer came in for an alignment to my shop with a 2010 camry. Both his ball joints were dry rotted and leaking, Tie rod ends dry and torn, and CV axle leaking on his left side. I told him get it fixed before we do the alignment, he agreed he wanted to be safe. He ended up not paying for anything and probably went to the next shop for an alignment.
@jasonpocaro27302 жыл бұрын
Both lower control arms & both OUTER tie rod ends. Make it EASY on yourself JT. 😎👍
@rogerderamjet4 ай бұрын
You worry too much 😂
@OnlineMechanicTips4 ай бұрын
Lmao, seems this customer don't worry enuff
@CaptainAries983 ай бұрын
when i 1st got my license i was unaware about front end issues cuz i never had any tell me or teach me any of this but now i do and still in the process of rebuilding my car a yr later
@tyrellharden10026 ай бұрын
Yoo Dangerous as fuck
@tennaj13672 жыл бұрын
Custom carbon fiber special edition interior probably cost 10 K extra 😁😁🤣
@BBBUrMom18 күн бұрын
Swear this is how my 84 Monte carlo front end is like too 😂😂 I'm rebuilding it but yeah tons of play
@matthewgodwin66882 жыл бұрын
Last two cars I had have had wheel bearing issues Salt would get in them
@DJGRoc Жыл бұрын
Marquee Wheels, M3246. Same brand I have on my Chally, but not same model. Them ball joints are the reason them tires look like that.
@GL0697 Жыл бұрын
Props on shaking the vehicle down before doing an alignment.
@germanjesus2 жыл бұрын
After market wheels will bust those joints a lot faster then factory equipment
@Torsee2 жыл бұрын
Yup! No rubber sidewall’s to absorb the pot holes! 😂
@donivanwagner39036 ай бұрын
Craziest part is that so many people think it's ok to beat the shit out of their car while driving it. That's how they end up here.
@glenerickson358 Жыл бұрын
This will be one of the times she will say, "I don't believe you. You are taking advantage of me.". 🤦♂️
@The_Real_Slender10 ай бұрын
Same thing happened to me,exept hit curb rain 2 days ago fortunately didnt hit anybody but its damaged right wheel front and back bith in right side and left side front and back wheel is all good but possibly need alignments
@nevinkuser98929 ай бұрын
It needs everything.
@GR33ZY.A15 ай бұрын
Vibration can also be caused by low tire thread uneven......
@dannylinc62472 жыл бұрын
good inspection. check the steering linkage closely. this car needs more than tires and setting the wheel align.
@bmcminn88388 ай бұрын
I just had ball joints, tie rods and , new wheel bearings done....also had to get new tires because of it .....take me as a witness never let it get this bad lol
@Marvjustfunny7 ай бұрын
Well I think all that shaking it around did the job good work 😂
@pi17972 жыл бұрын
Talk about a chase of the shakes…😂😂
@602PHX21 Жыл бұрын
Not everyone can afford to fix everything at once you don’t know what position someone is in or what they’re going thru in life . Yes it’s incredibly stupid and dangerous but bottom line is they only have money for an alignment so they have to go somewhere that will do JUST that. Who are you to judge I mean what you gnna do pay for the customers work yourself lol ?
@marqijackson6103 Жыл бұрын
getting an alignment on that is pointless,
@Carlitosway21111 ай бұрын
No shop in their right mind would do an alignment on that.
@manbehindthecamera98987 ай бұрын
That ball joint is getting ready to pop out I had one that came in for oil change and the ball joint had play and the customer didn’t want to get it repaired so when I was backing it out the ball joint popped out all I was doing was backing into a spot
@justpuckett11 ай бұрын
Oversized tires do it all the time . She us LUCKY she came in when she did
@Doomzdayxx Жыл бұрын
Random thought. Why exactly would somebody downvote this video?
@ATF209911 ай бұрын
i can't imagine having my wheel bearings and ball joints called out by a guy with his shoes untied. lmfao. good work though.
@OnlineMechanicTips11 ай бұрын
Yea its amazing how ya brain can still function even with your shoes un tied. Lol..Thanks for tuning in dude.
@KevinChinn884 ай бұрын
Wouldn’t wheel bearings need replacing with this side to side motion of the wheels?
@simonramirez2438 ай бұрын
Dis my car right now driving a hoop d I went from changing a cv axle to upper/low ball joints, inner/out tie rods, an alignment, wheels, shocks, stabilizer bushings, a frame bushing. Just rebuild the whole bitch and quit screwing around lol
@robbiegoldfinch8137 Жыл бұрын
Gotta see this video
@StormLaker11 ай бұрын
I lose sleep at night knowing people drive around like this. If I so much as hear one clunk or rattle in my front end, the first thing I check is my bearings/balll joints. I just rebuilt the whole front end in my pickup......I'll never understand why people don't just learn how to fix this on their own, it's litterally a super easy repair to do.....the auto parts stores have the tool. I just bought my own and got a slew of air tools to help along with it. Last ball joint job I had done at a shop I got charged 1500......after that I'd had enough and vowed to never let a shop touch it again.
@SL-pg4dh11 күн бұрын
I hear you. Some of us live in an apartment + cold climate.
@pb4travel2 жыл бұрын
Hello, one question I have. I need tire aligment, because my outer front tires are worn of and my car steering wheel is not straight and when you drive it pulls me to the left. Main question before I go for aligment do I need to put on new tires or I should go with old tires which are worn out on the outer sides or there is no difference
@davidjackson9680 Жыл бұрын
Buy the new tires and get them aligned
@pb4travel Жыл бұрын
@@davidjackson9680 i did 4 months no problems:)
@crockettscashcoin Жыл бұрын
Do you rotate your tires every 5,000 miles or so? A lot of people think they need one because they see tire wear. Sometimes it's not about an alignment
@christian-ew7wi11 ай бұрын
Just had this same issue but i had the ball joints replaced then they said could be the knuckle so i dont understand what the problem is how would i check or know ?
@Rts-slots10 ай бұрын
Wherl hub assembly need to be changed too
@aliwooz913 Жыл бұрын
People will still complain and say i only came for an alignment lmao
@chicagocrazy57407 ай бұрын
Rims are nice and all but Gyyyat they be fucking up your suspension.
@ToonYourCar11 күн бұрын
Sometimes it could be the wheel hub bearing aswell
@ericfernandez97556 ай бұрын
It’s not just the ball joints. Seems the wheel hub bearings need replacing as well! 😮
@gorilla9519 Жыл бұрын
Rims are more important!
@user______2 жыл бұрын
“Y’all see that” *camera turns into a washing machine* 🌀
@jayden.6 Жыл бұрын
like no bro i do not see anything
@yamonteАй бұрын
They just need to get a whole new wheel hub and probably tie rods and lower control arm
@bondjames652 Жыл бұрын
Shes trying to Dodge the problem.
@seanmurphy23028 ай бұрын
Fun times.
@Pinkielover11 ай бұрын
easy fix , they aren't too hard to do, they look like brand new cv axle boots
@gangstalkingsimulation1319 Жыл бұрын
yep my car vibrates when i slow down
@Carlitosway21111 ай бұрын
Sounds like a brake rotor issue
@flykiddke6306 Жыл бұрын
Do y’all not realize that everyone can not afford to get everything done IMMEDIATELY I might just want an alignment today and come back for the ball joint replacement tomorrow stop judging and bashing ppl and you don’t know the situation smh.
@Carlitosway21111 ай бұрын
This issue had been going on for some time. This didn't happen over night. This is called neglect. If you drive a vehicle, you need to put money away for that vehicle for WHEN things need repair.
@franktorres6337 ай бұрын
Is the opposite you need to replaced the ball joins and then get the alignment..
@NickBBBB7 ай бұрын
@@franktorres633what if I just want me steering wheel centered, how would I go bout doing that without doing all that extra stuff immediately?
@kevintucker33542 жыл бұрын
Dangerous!
@DevonIsPsycho Жыл бұрын
Im laughing at what your doing with the camera angles
@faborwick5887 Жыл бұрын
My car vibrates at 45 mph anytime someone's sitting in the passenger seat. What do y'all think that one could be? It goes in the shop this Thursday
@shotbykray Жыл бұрын
Get that checked out ASAP!
@luiscastro51986 ай бұрын
Wheel bearing ball joint and tires
@relljohnson9456 ай бұрын
Is it the lower control arms AND ball joints?
@WhiffenC Жыл бұрын
Dont trip, you might need a lace alignment yourself
@t.l.robinson21629 ай бұрын
You should be able to hear and feel that while you are driving.
@SL-pg4dh11 күн бұрын
And feel it. Her wheels were shaking and vibrating at higher speeds
@honorablewiz7447 Жыл бұрын
were those spider webs 🕸 😅
@OsamaBin.Smokin5 ай бұрын
My Dakota needs ball joints shocks and struts a new transfer case front cv axels and a new drive shaft headlights don’t work possible relay and the wipers don’t work possible relay got a misfire and a few more things I forgot but I still drove it to work today 😀
@jasonmartinez2363 Жыл бұрын
Bad wheel bearing cause excessive wear on ball joints.
@tayaria72802 жыл бұрын
People spending money on aftermarket wheels and letting their suspension go to hell
@baqashahmath15665 ай бұрын
Replace the whole lower control arm as one unit
@RikAindow Жыл бұрын
Is there not an annual safety check in this area? Those balljoints are well past it. How could anyone drive with that knocking?
@Alberthoward3right9up2 жыл бұрын
Imagine how fast them tyres scrubbed out 😂
@maribelcantu60852 жыл бұрын
Mine makes a strong buzzing in the front I feel in my seat and pedal . I hear a single knock like something snapping open and shut no matter what speed . Notes on car in 2021 said keep eye on outer tie rod. Started when I got all 4 new tires smh no one knows anything
@NickBBBB6 ай бұрын
Just give her what she asked for 🙄🤦♂️ she wants her wheel aligned & that's all she wants to pay for right now, damn smh
@jmemixx Жыл бұрын
Those ball joints can be pressed out
@rickyhawkins7407 Жыл бұрын
They can’t drive it that often. There were cobwebs in the R control arm. 😮
@gabeagueda-furman535 Жыл бұрын
My man says do you see that rotating the camera, sit atill
@parkernish50952 жыл бұрын
Why does everyone bypass wheel hub assemblys ??? Also needs to be changed if your tire will do that btw lmfao and tbh it looked like the ball joint nut was lose
@OnlineMechanicTips2 жыл бұрын
Its not that its bypassed, if it shows up loose during your inspection, you should def include it in your estimate. Thanks for watching Parker. Please subscribe to the channel for me, thanks.
@laredo7107 Жыл бұрын
Dangerous
@erikdenwalt4801 Жыл бұрын
The brake caliper covers say it all
@3keeling37 ай бұрын
How long has that car been sitting? Is that a spider web on the right side?
@benztech22622 жыл бұрын
It’s always the ones with the “fancy wheels” that neglect their cars the most it seems. Did they buy the repairs?
@OnlineMechanicTips2 жыл бұрын
Nope, declined
@d.b.cooper18692 жыл бұрын
@@OnlineMechanicTips gottem
@CHEAPROLLIN2 жыл бұрын
We going live tonight boss
@OnlineMechanicTips2 жыл бұрын
Yes we are
@CHEAPROLLIN2 жыл бұрын
I'll be there!
@welshshogun6750 Жыл бұрын
potential killers driving among of us
@sewj80469 ай бұрын
Here is the kind of mechanic that WILL break your car. One, notice how he shoves the car in park. Two, notice there is no paper on floorboard or seat to prevent oil and dirt. Three, it is good he noticed the ball joints, but does he have to continue adding pressure to prove that it is loose? So he can set up a camera to record this but he can't be considerably gentle when putting it in park or putting paper down to prevent oil and dirt from getting in the car. I wouldn't have this guy working on my car. Sound like the kind of mechanic that'll be eating a sandwich over your engine. Also, I hope he's not going to be the person that speaks to this customer. You can already tell he got jerk tendencies. It's not like the lady knows her ball joints are worn she just thinks she needs an alignment.
@OnlineMechanicTips9 ай бұрын
Well the good news for you Mr Clown Man is that I don't want to work on your POS cars anyway. And for the record you have no idea who car this is, for all you know this could be a car I'm considering buying for the low. Just used it to make this video. Fact is, you don't know anything so I suggest you take drama queen petty ass on somewhere. You could have easily simply hit the stop button on the video but ya curious ass hunting for shit to complain about. Tell you what, i got about 1k other videos on here that you more than welcome to watch and be petty on. Have fun with those as well, enjoy yaself hater.
@INSYA8 ай бұрын
@@OnlineMechanicTipstell em the facts then?
@machinemaker22488 ай бұрын
Eating a sandwich over the engine? I can drop a handful of sand on the engine and it's not going to do anything. What do you think the engine encounters while driving down the road? I think you're talking out of your ass and you can't even figure out how to get the hood up.