Omnibus V3 Flight Controller

For all the info you want on the Omnibus flight controller click here - • Flip32 Omnibus (F3/F4/...
Parts and Reviews playlist - • Parts and Reviews Play...
Omnibus F4:
MyAirBot - store.myairbot.com/flight-con...
ReadyToFlyQuads - www.readytoflyquads.com/flip-3...
All my playlists - / @projectbluefalcon
Video editor - amzn.to/2n7sUiF
My personal vlog channel - / jcofficial3

[@pippifpv]

Nice upgrade to the board

[@abizhar-7583]

I can't get UART6 to work. Do I need to set anything other than the stuff in the ports tab? because I can get UART 1 and 3 to work just fine.

[@jasoncross6151]

JC need help please, I have this exact FC and its amazing other than I cannot for the life of me get the SD card n the black box tab, I enable black box in the configuration and have a brand new memory card but on the tab it only lets me choose serial or data flash, any ideas please?

[@fotakidi]

Can you plug a secondary battery to power only vtx and camera?

[@Man_of_culture_21411]

is the signal cable for an LED still PWM6?

[@chrisfettig]

PBF, Have you tried out the Flip 32 F4 omnibus pro v3 and the smart audio feature?

[@aowi7280]

Can you post a list of the connectors on the Omnibus F4 Pro? You mention 1.0mm JST SH on one of your videos. What about the others?

[@Neodous]

Need some help here guys I have the omnibus f4 v3 and cant get my Spektrum telm receiver to work right. I am using the pins near the motor header pins and can bind but when I go into betaflight and look at the receiver tab all the channels are going crazy. I can see that a signal is being seen because if I give stick inputs the values change.

[@YAdr89]

Hi, I tried Fc omnibus f4 V2 from BG The port usb it is jump away... and I have friend with same problem on the same board. I have soldered the port usb... Then the bec of 5 volts of the Esc work to 1 volt... The bec of video to 5-volt work to 4 volts... The camera to 4 volts not works. PS yes, the fc make much hot…

[@dimyata]

Hi JC, can you add link how to Connect and solve this FC F4 V3. 10X :)

[@emrahksk83]

Have it barometer?

[@SighKick]

Please will you give the proper name (or an eBay link) to purchase the single header plug with cable. I have found the 4pin and 6pin micro JST SH 1.00mm female connectors but the supplier doesn't mention whether or not the cable is plastic or silicone (nor the guage). Can you advise please? Tks Dave [NZ]

[@TurKFXI]

Can you check out Matek F4 FC and HGLRC F4 AIOs? Actually HGLRC seems to be better than DYS and also have 12v regulator.

[@julistrauss6106]

CRSF?

[@jamble7k]

whats the current capacity of the 5v rail on this one?

[@ProjectBlueFalcon]

1.5a

[@jamble7k]

very nice! top quality stuff from airbot

[@witespy]

the Uart is changed to u6 on the main inverter

[@InFrontOfYourBack1]

witespy Yep. This was a big change with the v3. Still need to pull the uninverted signal from the Rx if you want telemetry.

[@gsisk911]

witespy please respond to your emails!

[@mistercohaagen]

witespy All I want to know is how to actually do the "Repair/replacement service" on the Asgard AIO's, cause I'm about ready to build a few 3" quads with those.

[@witespy]

They will be perfect for 3inch builds. If you do have a problem if you send it back 90% of the time we are able to fix it and they seem better then new just about. just message back the order email with pictures and details of what happened.

[@chazasari7304]

Does this mean that you need to connect your SBUS receiver to the j10 connector now? Or are you talking about just the telemetry wire for your RX?

[@yonallb]

Balls, just bought the old version.

[@willreddy896]

where did you buy this from? have you got the link

[@ProjectBlueFalcon]

Either Myairbot.com or readytoflyquads.com shop.myairbot.com/index.php/flight-control/cleanflight-baseflight/omnibusf4v3.html www.readytoflyquads.com/flip-32---f4---omnibus-v3

[@willreddy896]

Project Blue Falcon Cheers, getting one to replace the kiss

[@ldnowak]

that is the diference between these these two? (the fist is your link) www.readytoflyquads.com/flip-32---f4---omnibus-v3 www.readytoflyquads.com/flip-32-f4-omnibus-v2-pro

[@ldnowak]

the link says v2 pro but the website says "Now Shipping the Newest 3V "

[@witespy]

the "pro" has a build in current sensor

[@user-bn2dm4zx7i]

Anyone knows if I can use PWM transmitter with those flight controllers? Thanks

[@ZeroFPV]

You can't. SBUS or PPM (or Spektrum SAT) only.

[@user-bn2dm4zx7i]

mmm that's unfortunate. Thanks for the answer!! (wasted about 1hr looking for that info on the web, we should document that stuff better)

[@ZeroFPV]

Κατσαρό Πιρούνι jc did mention it in his initial review. aren't there sbus or ppm receivers for your radio?

[@user-bn2dm4zx7i]

there are, but kind of expensive, around 30 euros (I have a futaba T6ex) but I think this gives me the opportunity to upgrade my transmitter. Maybe those turnigy or that radiolink at9 from bangood

[@ZeroFPV]

Κατσαρό Πιρούνι oh yeah, I understand. what about the "Cooltech RFASB"? you can get it for about 20eur from banggood. of course you are right. the Flysky/TGY receivers are even cheaper.

[@sdenham25]

First!

[@madyet5235]

i have the first omnibus i think, and i hate it, to this day the osd will be on screen until i arm, then it disappears. i did the whole common ground solution ,with no actual fix. the video actually got worse. fed up....