One of Amazon's BEST KEPT SECRET Paint Guns!

[@Firehawk0944]

The gun is made/produced for TCP Global. I bought it close to 2-3 years ago and absolutely love it. I don’t have any expensive guns but coming from your basic home ones it honestly makes you feel like Superman. If you can do good work with a cheap gun you can do amazing work with a good gun. That’s what I believe this one to be is a truly good gun. I mostly paint single stage paints on heavy machinery and dump trucks and the results are amazing! There’s a long reach excavator I painted in my videos on my channel and while there’s no close up of the paint, it’s smooth as glass coming from this gun. Absolutely love it!

[@tundrawhisperer4821]

There’s also another company, selling on Amazon, by the name of BEETRO that has this identical gun, but just has their name on it. I hope it is a good gun for me. I’ve only done a few practice runs with it using water. It feels good though. And seems to spray well. Time will tell.

[@bonnivilleblackcherry9745]

When you find out who makes Iwata and can buy a $500-1000 gun for $0.30 con the dollar you'll be tickled pink. The gun has their name but the CAP (they make them for Iwata) says Anest Iwata on them.

[@philtucker1224]

Brian all of your tutorials are so good, hopefully every repair shop across the globe sit their apprentices down to watch your lessons. You are probably personally responsible for an awful lot of better looking repaired cars in this world than you could ever dream of! .. Live long and prosper my friend 🖖

[@johnrideout7124]

If you start to get a paint-run on a door, don't panic, keep going, follow the run to the bottom, give it a second or two, then wipe the excess off the base with one finger. That was advice from an old Polish expert cellulose sprayer in the 60's. I used it often !.

[@edgargg1669]

never tried this one i usually just sand it off with 1000 grit

[@johnrideout7124]

The old Polish Toni, also gave me the best kept secret, as nobody told you anything in those days.! How to thin the ceiiulose correctly to spray. Which was........keep adding thinners, stirring and checking viscosity, untill each drip falling had No tail, then it was perfect. ! I can't remember pressures, but test on areas starting at about 20 P.S.I. raising till O.K.. At a fan width which suited yourself.! .........

[@67ST4NGSTER]

I bought this same gun a few months ago to paint my mustang. My first time spraying a car, and this gun gave me fantastic results. I am very happy with it.

[@Gegsite]

This color and the finish just WOW... Brian + Mario = Superb!

[@BigGeorge3397]

Love the videos!!! I got to ask a question. Is the Master Pro 44 better than a HF Black Widow? I wish someone would do a video comparing, the R500, Master Pro, Black Widow and EuroPro

[@WilliamVG]

I bought the same gun as well, got excellent results shooting clear but make sure your air compressor can keep up, move's quite a bit of air. Cheers!

[@roberttorres6689]

I've learned much from you im doing a 69 gto im jamming it right now and I'm almost done with that then have to put the car together after that some blocking and then ready for paint every time I watch your videos and applie what I learn from you it just works and looks amazing thank you so much for your videos and help

[@williamearlshine2698]

What's the pps 2.0 adapter number for this paint gun?

[@dom6512]

The Husky HVLP guns sold at Home Depot have been my go to guns for a very long time. The absolute best value/performance on the market. They are made by Florida Pneumatic for Husky.

[@mancavebarbershop3761]

U have that one

[@fundamentallybroken4194]

This gun looks almost 100% identical to the Inokraft Drizzle D1. I have the Inokraft, and I love the thing!

[@tomoski8840]

I think it would be great if you could let us know the size of the compressor and the available cfm. Many guns spray well with big cfm from the compressor. Even a 5hp single stage compressor with a 60 gallon tank run out of air with a medium quality spray gun. The 1st half of the car looks better than the other half because the compressor can not keep up with the needs of the spray gun. With the HVLP guns, they do spray better with bigger shop compressors.

[@AbbasBinYounas]

The wet look on the paint is surreal!! Awesome job!!

[@kirbyconner9952]

I'm going to paint a car for my son and have no experience. If you could reccomend 1 gun that would give us the very best chance at getting a decent finish what would it be? Thanks for all the videos.

[@Slapshot544]

Would a 26 gallon 4.5 cfm compressor be good enough for this gun? I'm not gonna be paint an entire car I'm just going to paint my bumpers and a fender

[@Lymlyt96]

Bought this 6 months ago and I love it but as good as this gun is I think the 88 is even better it’s noticeably lighter and sprays more like a lph400 with more volume

[@6RAW6]

Love the color and the lesson!!!

[@dentremovalpro5776]

Brian, thanks for another great educational video. From my experience I wouldn't trust using the 710 in an open air shop. I think it will die back if it's used without heating booth. I am currently trying out USC 40-1 clear in the open air environment and had great results. Shine is incredible and leveling is excellent as well. Can you please try it one day and let me know your thoughts? The kit is about $160 and I think it can go h2h with top PPG or Shervin Williams clears that cost $350+. Once again I am looking for a good open air clear that will last without losing gloss after 30 days. Thanks again.

[@MidnightCustoms111]

Speedokote smr 42 high solids same price. Wont be disappointed

[@Reptile1997]

Hey brian, can i apply primer but spray the base and clear the next day ?

[@wildniscamper7276]

20 years ago i learned to stop the paintflow on each side..it reduces the waste of paint. i saw a lot of other fails bit the result is dope🤘

[@BruceLyeg]

That turned out beautiful . Very nice work

[@pablonunez769]

Great paint job wonderful

[@kevinmihalik2500]

The price point puts this close to the ANEST IWATA KIWAMI4-13BA4. You have reviewed both of them as great budget guns. Which would you buy if you had to choose?

[@bosshawg7427]

The problem when trends cause a surge in demand is the price starts to exceed value and places a budget item in a tier that it isn't justifiable. The same happened to the Black Widow. For those prices and under... Kiwami and FLG5 all day every day

[@howtodan1975]

My man, learned so much from you, keep sharing! God bless!

[@michaelogden2359]

GREAT VIDEO...seems the master pro works really good...looks great...

[@PhillipHall01]

Another GOOD one is the FLG 5 in my opinion.

[@danbarrett6113]

I paint signs with water based paint, tired of buying cheap airless sprayers. Is this a good option for me. I also spray water based polyurethane as well. Thanks

[@Cobra427Veight]

Hi Brian , I need to do a candy paint job on a motorcycle , so small panels , it's a medium metallic , would this gun be ok or will I need to have a bigger nozzel .cheers

[@michaellynch4342]

Good gun Brian great job love it

[@Matchlessoriginal]

Your videos are helping train my guys and the next generation of painters. I wish there was a channel like this for bodymen lol

[@PaulRiceJr]

Whats the name of that blue paint?

[@robertstorozyk2431]

Any thoughts on the LiME LiNE 1.4 mm PRO HVLP that's also sold on Amazon? Saw some vids here on Y of it being used on motorcycle gas tanks, but wondered if anyone used it on a car. Thank You!

[@demonico123456789]

This looks like Italco TTS gun but with few holes in the plastic ring behind the cap. TTS is 120$ in EU, and is laying glass, but it is air hungry in my opinion, for me it’s working best at 36PSI, but yes, TTS is LVMP and this one is HVLP. Currently I just (two weeks ago) bough Walcom Slim X Light HTE, and it was only 145$, I was blown away, so I bough Walcom Slim Kombat HTE, and it is making laying clear so easy, that one was 152$ in my country, new old stock, currently they are at 172$, and that is super cheep in comparison to US price. But they are really great nice guns for home, they work nice at 29PSI, for both base and clear, use them with UHS clear, and I tried them both on base and clear and they act identical.

[@BearBudgetgarage]

I have the Master Pro series 22. Been using it for 1 1/2 years now for smaller jobs. Works great. BUT they do need quite a bit of air. Been wanting to try their other full size guns. Upgraded to a 2 stage 60 gallon this year, and its been a Great investment. Consistent and dryer air is a real blessing

[@triadjoker96942]

Thanks for the info! Now what is a small compresor can uses to paint car

[@esteemedenergy]

Anybody know which PPS adapter works with this gun? Thanks.

[@robertleffler1615]

I have a DEWALT 15-Gallon Single Stage Air Compressor Model #D55168 - 225-PSI max tank and 5.0-SCFM at 90-PSI. Is this enough compressor for this gun? I'll just be doing body panel repair... fenders, hoods, etc, not complete vehicles. Thanks!

[@bradmason8334]

Can you use this for home walls?

[@asksteevies4941]

Brian do you think that the FLG5 has a comparable outcome as this gun

[@scottmiller6000]

hey brian, how about doing a review on a intertool 1.3mm spray gun?

[@MegaMajormax]

How does it compare to the ANEST IWATA KIWAMI4 1.3mm? They're pretty close in price.

[@HPAcustomriflesandcerakote]

Before I switched to all Walcom guns I used a brand called WTP and there clear box edition was identical to it. The master, WTP, atom, beevro, and a couple other are all the same models sold under those names just as those names different models. It was a good gun for clear

[@stevetaylor9265]

I am still using old debelvis pot guns. Might have to try one of these

[@v_doggproductions3797]

Do they make a Dekup adapter for this gun?

[@SpeedGasmEvo9]

Do you have any recommendation for LVLP spray guns? I have a 30 gallon compressor I would like to spray car panels with it.

[@Ulr149tw21]

how did you adjust the gun beautiful job

[@charleszornak8042]

What adaptor number for 3m 2.0 system thanks

[@georgef1176]

Brian master pro 44 or the Astro euro pro? What do you think is better?

[@low3.657]

That is beautiful finish! Did you guys sand and buff? Ither way great job!

[@PaintSociety]

Only the dirt

[@socalstangman4655]

I’ve been using this gun for a little while now. It used to be cheaper too. I’m pretty sure I paid 119.00 for this gun. I like it.

[@88zpeedy]

Is this better than the black widow?

[@dwaynelejeune3508]

Was looking at all what comes with gun/kit. What is the difference between the MPS and your PPS system?

[@timtranberg9494]

How does this compare to the Iwata Kiwami 4 that you made a previous video on? Aside from price, which one is better for an experienced painter?

[@dylangardener1580]

Can a 30 gallon compressor push this gun?

[@Ianf1x]

Gun looks a little like a devilbiss pro. Great vid thanks to you both.😀

[@PaganWizard]

Is this a stock Honda/Acura color???

[@arthurresendez]

Again, great informative content. Can you please tell me what size PPS adapter you put on this gun? I need a female with 2.0 version. Thank you

[@Carpentersspecial]

How does the misty cloud of material not create a spotty texture/overspray?

[@fr3d1974]

I recently became the (untrained) sprayer at a joinery company spraying 2k polyurethane but I noticed you don’t denib in between top coats? Is it better that way? Sorry for asking but I’m trying to become better at work

[@classicvolvorestorations3848]

Pro lite copy by the looks?

[@enforced_viper6066]

I always try to watching how people spray to determine how i like to spray my base and clear

[@fernandocordero5464]

Will a 10gallon compressor work enough for that gun?

[@chris21hammer]

Great videos Brian this is going to inspire me to set up my little area and do some Spraying myself I have not decided on a gun yet but I was just wondering what you would recommend for smaller jobs for I just work on motorcycle parts such as gas tanks fenders tour packs. Or will one of these full size larger guns work the same For smaller projects.. Thanks I appreciate any insight your channel is awesome

[@artlessdiamondmedia]

Mario did a great job

[@petea3514]

Brian - awesome video and informative content. Maestro👊🏻👍🏻

[@mmddmm553]

This looks like a good spray gun for the money my spray gun finally is done after 2 years ( cheap gun ) but I used it a lot . I think I will give this one a shot

[@Mr318jones]

ok online theres master pro 44 series, master elite pro 44 series, some in a white box, some in black box..which one to buy? i was looking at ult set. comes with 3 different size tips.

[@Mr318jones]

my customers want glass finish. will this gun help lay flat finish and reduce cut n buff? hate that process

[@mayrondelacruzperez5893]

You’re a great teacher 🔥👌🏾

[@andyb7754]

Great job. That's a beautiful color.

[@billlear5607]

The goons quad boys use sickens paint. And also 23rd garage. In your opinion considering price and quality is it as good as p p g .

[@petea3514]

Sikkens is used OE on the McLarens and Aston Martins and it’s from Holland and the company doesn’t sacrifice quality. Resins are only the best and they have amazing chemists that build amazing products.

[@sarraincook1992]

So y’all used the finish one clear coat on this job?

[@wingman8447]

Nice. Great info. Thank you

[@andrelawrence9644]

It’s hard to look past an iwata kiwami at those price point trust me

[@jtp682]

hi Brian, love your channel! I have learned alot from you . Which master pro gun is this one, there are three different Master Pro 44 guns on amazon, all different prices. thank you!

[@PaintSociety]

Hi. Its in the description

[@AnthraxVX]

i wish you would give the ANI R-160-Q a shot. id like to seee how you compare it.

[@tliebelt13]

This vs Flg-5? My local paint shop recommended this gun a few years ago.

[@adanrangel7686]

How does this one compare to the iwata kimwami 4?

[@MidnightCustoms111]

Well iwata. Need I say more? I use a lph400. I love it

[@WasabiJohn]

What's the color/paint code for that car? It's gorgeous...

[@RonLee-gg7qz]

Has anyone any experience comparing this spray gun against a DeVilbiss - Gpg Gravity Hvlp ? Need a new hvlp and need to spray acrylic enamel on antique vehicles.

[@EddieZ999]

Brian, I just received 2 Italco guns. Both were from China, but I heard good things about Italco. I juist used both tonight and they are insanely good. Both were around $150. One of them is a digital LVMP and the other is a non digital LVMP. Look and feel almost identical to Sata. I've bought knock off Satas before and they were garbage. You really should check them out and review them.

[@simplyhandy2769]

Better then specter from harbor freight?

[@rmejia7554]

Have you guys tried out the master elite pro 88? To compare against master pro 44.

[@PaintSociety]

Not as of yet

[@irneskajtezovic2357]

i would say anni spray gun for 100 euros is great for european buyers realy nice atomatization and long lasting

[@JoseHerrera-tx4jq]

Do a review on the harbor fright spectrum 1.7 review

[@chrisgarza1691]

Just ordered this going back part time painting and sold my guns after leaving to work on helicopters for the army hopefully this will get do the trick...do you have a part number for pps 2.0 adapter by chance

[@PaintSociety]

I’ll finish out tomorrow

[@thelionkinglovesick]

Hi Brian, I just bought this Master Pro and run with 20 gallons 5 CFM, plus extra old 25 storage tank combine, but I got real bad on clear coat come out, so frustrating. What is your opinion ? Please.

[@PaintSociety]

Try backing out the fluid. Add some reducer to your clear

[@EliasPaintingCo]

Is the gun good for low pressure air compressors?? I have a Devilbiss gpg, cc500, and I know that requires a lot more air pressure.

[@PaintSociety]

It’s not exactly. No

[@EliasPaintingCo]

@@PaintSociety So what would be a good gun for a small compressor

[@fiily1]

ANEST IWATA KIWAMI4 or Master Pro 44 Both are roughly the same price $169.99 Which would you buy?

[@travisjackson6923]

What type of clear, laid beautiful

[@SOCOM637]

Thank you for the video paint society!

[@vitobuccina4947]

What is the paint code? Thanks

[@victorwilks88]

good to see you behind the camera

[@stonebruze1499]

Is it better than the Black Widow

[@Blobb2013]

Any suggestions on a decent paintgun for primers and fillers? I have a used gti pro light for base and clear which is amazing, but i want a cheap gun for primers and fillers

[@PaintSociety]

Just grab yourself the purple harbor freight

[@Blobb2013]

@@PaintSociety There is no harbor freight in my country 😅 But i think i have a cheap one thats like the harbor freight 🤔

[@nowyourefinished6481]

Brian, if you were to buy one gun, would you go with this one or the Eastwood Elite CC500? Is the Eastwood gun worth the extra $200? Thanks!

[@PaintSociety]

The cc500 is a lighter and a little easier to maneuver but for $200 more I don’t think it’s worth the added cost

[@AWD_T]

Can you use this for primer with a different tip?

[@setthehook4me]

I've used this with the 1.8mm setup for primer and/or sealer.

[@Keepin-it-wheel101]

Which gun would you recommend for clear coat, I have a hard time finishing DIY projects and getting a good finish for the clear coat. Options in the middle ground.... Thanks and love your channel.

[@iNeedMoreHondas]

Gti pro lite

[@Keepin-it-wheel101]

@@iNeedMoreHondas Devilbiss? I am going to search for it thanks...

[@aksfactory]

Anest Iwata Kiwami 4 is a great gun for clear

[@raymondtrotter4655]

Absolutely 💯 % goodness from Brian's teaching I agree with everyone else. I will be checking out Mario's class as well. Thanks again Bro for another great lesson. Youll make us all professional auto painters yet. Trucker Ray ✝️ ❤️

[@hoffman5982]

How do you feel about a Devilbiss FLG 4 for a starter gun? That’s what I’ve been using but all I’ve sprayed is a hood, 2 suv spoilers, and a few other small panels, all using the eco line sealer/base/clear from my local paint shop. The results I got I was super happy about being the first time I’ve ever sprayed, the hood was my first job and it only had some orange peel that came out well enough after cut/buff, and I’m pretty sure it was due to airflow issues. I use the 1.5 tip for sealer and 1.3 for base and clear, taking it apart and thoroughly cleaning it between each step. My other question is that I’m about to spray single stage for the first time on my brothers Miata’s fender, the rest of the paint is the original single stage. Should I use my 1.3,1.5, or 1.8 tip? And for compressor, mine is an old 23 gallon that was rated for 7+cfm, but i used a tool yesterday that couldn’t hold 4.2cfm @90(dropped from 125psi to 70 after only 2 minutes), should I use this or my dads fairly new kobalt 8 gallon that’s rated for 4 @ 90? Like I said, just doing a small fender. Sorry for the wall of text, I’ve been watching primarily your channel since I decided to try out painting during the pandemic lol

[@JimmyJiveJones]

1.3 Tip for Single Stage, id use the larger compressor. i hear alot of good things about the FLG.

[@lorddarphyve]

How much air compressor is needed for a gun like this?