One Thing That TICKS Me Off About This Model Car Kit Ep.269

  Рет қаралды 15,964

The Luka Cee Channel

The Luka Cee Channel

Күн бұрын

Пікірлер: 129
@RattleCanShenanigans
@RattleCanShenanigans 2 жыл бұрын
I was hesitant to click on the thumbnail because you're talking about one of my favorite kits here! But after watching... you are absolutely right. Revell's 2dr post Bel Air kit has that same stupid mold line and if you check the final in the video series I did when I built it, I pretty much obliterated the character line. When I built the Black Widow iteration (which I need to re-shoot a video for, jeez!) I made sure to place Tamiya tape along that spine and then block sanded the rest away, ensuring that I preserved the quarter panel's integrity! I'm sure there are other easier and/or big-brained ways to go about it, but I never claimed to be a smart man... Just one who works with the junk he has in front of him!
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
FINALLY! Someone who gets my video!! LOL. Thank you. Yes, I do love this kit. You get the Pinned Comment for this video.
@THROTTLEPOWER
@THROTTLEPOWER 2 жыл бұрын
So true!!!!
@danrosenello4847
@danrosenello4847 2 жыл бұрын
You showed us the answer to this mold line right in the video. One of those number 11 knives will make short work if that tiny line. Just scrape it slowly right up next to the character line. Gone ! Also, I recently found my ancient attempt to create a Black Widow from that MPC kit. I’ll post a few pictures of it on the FB page a little bit later today
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
Cool do that. I'd love to see it.
@CR7659
@CR7659 2 жыл бұрын
Originally the AMT 57 came with mild and full on custom options - a second, extended nose, hood filler with small insert and extended tail. The other option was a chopped top - the roof had a cross molded inside, you cut it off, cut it in four pieces, and it had a one piece window insert with a raised cross, it made the top wider and longer. I have one I got up to primer, but I cut the windshield and rear window off the insert and they plus the hood have vanished. I started with an old build my dad had done and cut out the rear wheel arches, which i replaced with 51 Chevy front fender openings lowered some in the quarters. It doesn't look bad, but I don't know if I'll ever finish it. All those parts went away when they did the Pepper Shaker version around 1969-ish. I have not looked in a "restored" release to see if any of it came back. I would imagine sooner or later Revell will bring that back, if they still have the tooling. I'm sure you know the deal with the takeover and they sold off the tooling still in the US to Atlantis and Salvinos. Looks like the idea was to try to hide the parting line with the character line.
@wallace49
@wallace49 2 жыл бұрын
Carefully run tape along the body line you want to keep and sand the mold line with a fine sanding stick.
@oldmanandthed2934
@oldmanandthed2934 2 жыл бұрын
Nail cuticle scraper... end is a small V-shape with a sharp notch in the crux. Works great on oblique stuff like that. I buy 3 or 4 a year. Your missus prob already has one, but don't get caught stealing lol... By the way, love your stuff man... I'm 61 and I still pick up a new tidbit from you every now & then. Hope you are well!
@ledheadkustomplastic3442
@ledheadkustomplastic3442 2 жыл бұрын
That line is extremely easy to deal with if you put a little putty and block sand carefully it MAGICALLY disappear.. No need to get all BENT over it..😎👍
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
It was a PITA. 😆
@youknoweverything7643
@youknoweverything7643 Жыл бұрын
​@@TheLukaCeeChannel it always was a pita to get it perfectly smooth and not come back as a ghost in a week or month after painting right before you take it to a contest or show boom it shows up in the light as a ghost I finally got it to stay away for good after two of them and more experience
@mittenmodeler
@mittenmodeler 2 жыл бұрын
Thanks for the video.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
You are welcome!
@Mark_Hubbard
@Mark_Hubbard 2 жыл бұрын
Can you not tape the molding with masking tape, trim it like you are applying foil, thus allowing you to work the adjacent areas whilst protecting the trim work?
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
Exactly.
@josefhyatt2780
@josefhyatt2780 Жыл бұрын
I love your style bruddah!!! Model on!!!
@TheLukaCeeChannel
@TheLukaCeeChannel Жыл бұрын
Appreciate it!!
@andydawson2101
@andydawson2101 2 жыл бұрын
I noticed that on mine so I sanded them off then glued a small strip of styrene rod and some sprue goo bit of sanding it came out great..
@randallwalker133
@randallwalker133 2 жыл бұрын
I bought two of these kits when they came out. Opened one only to find they packed the wrong body in the box. Opened the other and found the same thing. Monogram sent me two correct bodies and told me to keep the two wrong ones, which I still have. If you have a copy of SAE Contest Cars 2019 , on page 75 you can see what I did with the kit.
@deenjoan9938
@deenjoan9938 2 жыл бұрын
See its still a nice kit just like you said now I want one too 😆Thanks enjoyed
@philliprowe2656
@philliprowe2656 2 жыл бұрын
I want you to do a vid of you building one of the original Revell 57 with the opening doors hoid and trunk .A little tricky but it came out great ;Painted it seafoam green with a white roof!
@michaelcooke2559
@michaelcooke2559 2 жыл бұрын
It seems like every kit has issues. As a modeler I just deal with them. I am too happy to have the kit to get very upset. Thanks for sharing.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
That's my point. I state this in many of my videos. If you get what I'm saying. I denied myself this kit for 10 years because of an issue on it I didn't want to deal with. Now I'm over it. And Happy I got the kit again.
@michaelcooke2559
@michaelcooke2559 2 жыл бұрын
@@TheLukaCeeChannel Yes, you definitely denied your self with the opportunity to buy several of those kits because of a modeling issue.
@raymondblasee1048
@raymondblasee1048 2 жыл бұрын
Luka, I watched your video and I figured its not a big deal at all to sand away the mold line on the fenders without hurting the crown lines on top of the fenders. I built a few of these cars and it was no problem. Its not enough by and far to nit pick about these wonderful 57 Chevy sedans Revell made for us. In the late 80s, I was doing the same thing trying to combine the MPC 57 gasser & the AMT 57 Belair with sort of disastrous results that it got thrown back into the box for a maybe someday ill get back to it until Revell came out with the 57 Black Widows, our prayers were answered very well!!!
@gregoryledbetter5428
@gregoryledbetter5428 2 жыл бұрын
in 2004 i used the 56 del ray roof and cut it at front door panel line 8mm below beltline and used on a 57 kit. love the black wodow kit except fornexact reason as you. I also have a tubbed out version almost complete using the amt street machine version as donor.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
I had seen quite a few builders do that very thing with the 56 kit. I was thinking about it, myself. Your Tubed idea is exactly what is the plan for this kit.
@rc67die-castcollector
@rc67die-castcollector 2 жыл бұрын
Hoping to be able to make it to your show in March!
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
I don't have anything to do that show. I might be there, but not 100%
@rickzinck9326
@rickzinck9326 2 жыл бұрын
Sometimes I think that engineers just sit around thinking, How can I piss people off? lol
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
Yes! And I know a few. 😉
@scooterdoughmas3012
@scooterdoughmas3012 2 жыл бұрын
saw a vid few years back of a full body bumpers and all of a 57 @ a california dragway anywho dyno don was there love the car worked all weekend on it and the final pass it went 236mph in the quarter mile wheels up 57 chev luv em have a great weekend see ya cooter out🤩
@PontiacBanker
@PontiacBanker 2 жыл бұрын
I’m like Marty! I carefully surgically remove the shrink wrap ONLY from the bottom of the kit, and I keep the plastic on the rest.
@oldschoolmodeler
@oldschoolmodeler 2 жыл бұрын
Great video Luka Cee 👍 I really want this kit. I'm like you, i like the 2 door post over the 2 door hardtop tri 5 chevy.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
Yeah. It really is a great kit.
@daviddanglis7135
@daviddanglis7135 2 жыл бұрын
Thanks for this. I've seen those parting lines, too. Revell does that sometimes -- the parting line that runs across the nose of their '62 Corvette -- SO CLOSE TO THE "CORVETTE" LETTERING! -- looks like it will be interesting to remove. But I was hoping you might point out how the roof of the 150 has what feels like a flat spot, starting just behind the windshield header. If it was a real car, the flat spot is almost like some kids were playing up there and made the roof sag a little. I don't know if the mold was incorrect, or the body was removed from the mold too soon...I don't even know if others have noticed this. Maybe it's just my kit. My Revell '57 Bel Air post car has another weird issue -- the plastic in the area of the rear wheel openings is SO thin, there's actually a small hole in the body on one side.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
I'll take a closer look at that. We're not done with this kit, yet. Video soon
@gregoryledbetter5428
@gregoryledbetter5428 2 жыл бұрын
i had to block sand alot to get rid of that
@davidjohnmiller4849
@davidjohnmiller4849 2 жыл бұрын
Isn’t that a ‘55 .... just kidding I know it’s a ‘58
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
😆😆😆😆
@goratgo1970
@goratgo1970 2 жыл бұрын
Sux if it didn't get noticed until after paint - THANKS for pointing it out as I will eliminate it on my stack. One kudos for primer step as it would reveal it. Agree, would be super if they parted at crest of trim, but IDK if possible.
@davidtoups4684
@davidtoups4684 2 жыл бұрын
SMS ceramic scraper. The best tool for removing mold lines
@mitchbarber3468
@mitchbarber3468 2 жыл бұрын
Now I read it closer that was their theme for their show
@bigeddie1231
@bigeddie1231 2 жыл бұрын
cool video sir
@jean-guylebreton5332
@jean-guylebreton5332 2 жыл бұрын
Thanks for the heads up,could you tell me when u will have your door handles for sales,thanks in advance
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
Some time early next week.
@jean-guylebreton5332
@jean-guylebreton5332 2 жыл бұрын
Ty you very kindly sir
@Duececoupe
@Duececoupe 2 жыл бұрын
When Luka Cee throws you dirty screwball, you accept it, you deal with it and keep watching....right uncle Luka? 😉😆😂
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
Pretty much! But it really wasn't dirty. In the end. I love this kit.
@alancyr3100
@alancyr3100 2 жыл бұрын
What if you scrape it off with an exacto blade then some carefull sanding.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
That's what I do. Thanks.
@mitchbarber3468
@mitchbarber3468 2 жыл бұрын
Question, ki am interested in a copy of the magazine that has the ed Roth article that u show in your intro, I have been a fan of him for years
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
I know nothing about that. That was a flyer for a model show I support.
@joeculpjr3028
@joeculpjr3028 2 жыл бұрын
Luka. Luka. Luka. Your treating this like a job. It's not a job. It's an adventure!
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
And your taking this too seriously. You really think I'm ticked off at this kit? You must be new to.my channel.
@joeculpjr3028
@joeculpjr3028 2 жыл бұрын
No. No, bud. You're taking it too seriously. I've been subbed for about 3 yrs, just don't comment very often. I really enjoy everything you do with the channel. In short just funnin' with you, playing devil's advocate.
@lukasgarage956
@lukasgarage956 2 жыл бұрын
AMT/MPC slick is the ones to use.
@johndb5776
@johndb5776 2 жыл бұрын
I had one that most of the "character line" was missing on the passenger side. I just sanded both sides smooth even though it's incorrect. Other than that, it's a great kit.
@realmaindrianpace
@realmaindrianpace 2 жыл бұрын
Fine sand paper is a wonderful thing.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
It sure is.
@squishycakes9087
@squishycakes9087 2 жыл бұрын
honestly, l don't see the problem. Sand off the mold line and the Characture line, then replace it with a piece of Evergreen plastic strip.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
I don't want to do that.
@THROTTLEPOWER
@THROTTLEPOWER 2 жыл бұрын
Felt like it was yesterday when the Black Widow came out. Where does the time go????
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
Tell me about it, Tim.
@THROTTLEPOWER
@THROTTLEPOWER 2 жыл бұрын
@@TheLukaCeeChannel Exactly!
@scooterdoughmas3012
@scooterdoughmas3012 2 жыл бұрын
dd has the real deal going on and im wandering about doing the 1/24 scale lub your channel hahaha no space on my bench either 🤣
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
HUGE fan of DDs Speed Shop!!
@ronstewart9792
@ronstewart9792 2 жыл бұрын
Great kit Luka except for the front fenders. Ron
@charleskottman6609
@charleskottman6609 2 жыл бұрын
IMO the Revell “California Wheels” 57 Chevy sedan Belair is a better choice for a pro street / sportsman build… It has lots other options for pro touring builds too…
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
Isn't that kit based off of this kit? Yes, I want to get my hands on that one, also.
@ruanecrummett9261
@ruanecrummett9261 2 жыл бұрын
Easy fix you could just scrape it with a xacto carefully of course
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
Yeah, I know. But it takes more than that.
@Paulthediecastguy
@Paulthediecastguy 2 жыл бұрын
That parting line looks as big as the grand canyon. Lol
@REKlaus
@REKlaus 2 жыл бұрын
Doing a few models after not doing any for about 30 or more years. I see many youtubes with comments about Parting Lines. I don't remember having any problems with them on the models I built in the 60's and 70's. Might be they where there and didn't bother me enough to do anything about.
@daviddooley5361
@daviddooley5361 2 жыл бұрын
You could always scrape the character lone away and replace it with a thin piece of styrene after you've gotten the parting line removed.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
That's too much of a PITA. I have a good way of taking care of it. Upcoming video.
@eme5793
@eme5793 2 жыл бұрын
Hi I'm coming to San Jose in July ish and would like to go a swap meet, do you know of any at that around that area at all. We done have anything like that in New Zealand. Thanks Graeme.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
No I have never even been to that area. San Jose is, I believe. Like a 10 to 12 hour drive from where I live.
@seanh2390
@seanh2390 2 жыл бұрын
I personally really like that kit :-)
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
I do too.
@bobbyteems1918
@bobbyteems1918 2 жыл бұрын
Huh? In looking at pictures of real 57's, I just see the top being rounded. I don't see a character line. Am I mistaken? Anyway, love your videos Luka...you da man!
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
It's very much there
@johnozechoski3897
@johnozechoski3897 2 жыл бұрын
Ok I know your really into modeling but don't you think your going to far
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
No, I don't. And I can tell by your comment. You didn't watch the video. If you did. You really didn't get my message. But that's cool.
@richiesspeedshop82
@richiesspeedshop82 2 жыл бұрын
I hear ya. Those lines look annoying to knock down. Eh it's going to go unbuilt anyways sooooo 🤣
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
It is a major PITA. But, at the day. It is worth the work.
@richiesspeedshop82
@richiesspeedshop82 2 жыл бұрын
@@TheLukaCeeChannel I've been keeping a close eye on that kit for years too but never pulled the trigger on buying one
@mikeomally2729
@mikeomally2729 2 жыл бұрын
this is driving me crazy, the box says a 57 chevy. you keep saying 57 chevy but the markings on the side of the car look like a 55. why i noticed it is because i like 55 chevys and 57. just wondering. :) also one thing that really bothers me in car kits is when they leave out the side mirrors. drives me crazy.
@Techninja666
@Techninja666 2 жыл бұрын
Must not like 55 and 57s enough if you don't know this is a factory stock 57
@Paulthediecastguy
@Paulthediecastguy 2 жыл бұрын
Why couldn't you change the front end with another one.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
That would be more work.
@Paulthediecastguy
@Paulthediecastguy 2 жыл бұрын
Yea but that makes the hobby fun.
@russgoodwin7560
@russgoodwin7560 2 жыл бұрын
"Clean work space..." lived no modeller ever, of any subject or scale.
@philliprowe2656
@philliprowe2656 2 жыл бұрын
I built that kit when it first came out,and it was a trouble -free build didn't notice that line but even if I did it wouldn't bother me!Painted it black and white without decals. still one of my faves!.
@earnierosenow9834
@earnierosenow9834 2 жыл бұрын
if that kit drives you crazy, NEVER build the trumpeter 1/200 TITANIC, the errors abound, there are aftermarket kits to replace about half of it, and the rivet counters are always finding stuff wrong, im in mine over 2k and still not started to build it as im still getting all of the correction parts, for the parting line just sand it all off and use an evergreen plastic strip to replace the style line
@goratgo1970
@goratgo1970 2 жыл бұрын
Like to know of those "Titanic issues" as I have my eye on getting one.
@earnierosenow9834
@earnierosenow9834 2 жыл бұрын
@@goratgo1970 there are several forums on face book for the 1/200 Titanic, and a good KZbin channel called Midwest model that is doing corrections on one, the errors are quite a bit,
@jasonrothgeb6071
@jasonrothgeb6071 2 жыл бұрын
😮 I figured (pun intended) this kit was huge, and I wasn't wrong. The 1:1 was 883 ft. long. That works out to just under 53" for a kit in 1/200th. Again, 😮!
@ralphswink136
@ralphswink136 2 жыл бұрын
I like 55 chevy more than the 57
@varzilla1513
@varzilla1513 2 жыл бұрын
I've got the solution! Why don't you just use a sharp flat sided needle file. Micro-Mark sells them.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
👍
@modelcars2978
@modelcars2978 2 жыл бұрын
🤠👍
@adammarsden2643
@adammarsden2643 2 жыл бұрын
Omg i cannot believe i just witnessed what i just witnessed. If it bugs ya that bad....mabye ya just love complaining.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
OMG I can't believe what I just read. You obviously did not watch the entire video or you just didn't listen. Moral of the story I love this kit. And don't let something this small, keep you from enjoying a great kit like I did. 🤦 Will, you know what they say. It takes all kind to make the world go around.
@JonnyHolms
@JonnyHolms Жыл бұрын
@@TheLukaCeeChannel spot on Luka, spot on. I try to always look 👀 before I leap.
@okcmodeler2
@okcmodeler2 2 жыл бұрын
Geeezz. …… just sand it out…..
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
🤦 wow. Another one. You didn't watch the whole video, did you?
@sroth88
@sroth88 2 жыл бұрын
When you have a kit with body issues build it into a Dirt modified. Problem solved.
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
😆
@devintackett7048
@devintackett7048 2 жыл бұрын
What makes that kit a 1957? Because it's not. That my friend is a 1955
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
🤦 Oh WOW. You're kidding, right? Google 1957 Chevy 150. This is most certainly a 1957 Chevy.
@Techninja666
@Techninja666 2 жыл бұрын
Tell us you don't know squat about trifives without telling us you don't know squat about trifives
@gabrielhenderson6959
@gabrielhenderson6959 2 жыл бұрын
It's a 55 fender not a 57 fender have any one else noticed?
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
What are you talking about. This is very much a 57 Chevy model kit.
@gabrielhenderson6959
@gabrielhenderson6959 2 жыл бұрын
@@TheLukaCeeChannel the side panel of the rear looks like a 55 because the rear fenders don't look like a 57 if you can see the difference
@gabrielhenderson6959
@gabrielhenderson6959 2 жыл бұрын
@@TheLukaCeeChannel the trim on the rear quarter panel its not a 57 it's a 55 so I see there's mistakes on this kit😬
@TheLukaCeeChannel
@TheLukaCeeChannel 2 жыл бұрын
@@gabrielhenderson6959 not a mistake. I even show a photo of a real one in the video. And if you watch my video on the model I built I go over these cars very well. Chevy did put that trim on the 150 coupes in 57. And that is in fact. Proper for the Black Widow. Google it. You will find tons of photos of real 57 Chevy 150s with that trim. The kit is 100% correct.
@gabrielhenderson6959
@gabrielhenderson6959 2 жыл бұрын
@@TheLukaCeeChannel You are right I wanted to buy this kit but I didn't know about the 150 trim so I will buy the base kit cool videos
@genemanno1533
@genemanno1533 7 ай бұрын
Sorry but this video did nothing for me. No information, no tech, no no nothing of value. Sorry but that’s the truth.
@TheLukaCeeChannel
@TheLukaCeeChannel 7 ай бұрын
But you watched it and gave me a view and a comment. Thank you, I really do appreciate it. Helps the algorithm. 😁👍
@kevinsmith7697
@kevinsmith7697 2 жыл бұрын
Thing that erks me the most is; the score or groove under the hood of most kits, like we really need a permanent mark under a hood that will ghost through almost every paint job!😳 of course that’s part of model building!😎✌️😝🫡🇺🇸
One Thing On The AMT 55 Chevy 2 Door Post You May Be Doing Wrong Ep.259
12:40
Ep.55  Scale Model [Race] Car Detail Tips
14:10
The Luka Cee Channel
Рет қаралды 47 М.
УНО Реверс в Амонг Ас : игра на выбывание
0:19
Фани Хани
Рет қаралды 1,3 МЛН
Their Boat Engine Fell Off
0:13
Newsflare
Рет қаралды 15 МЛН
Saving From Destruction one of the RAREST Guns of WWII: GEWEHR 41
17:29
Backyard Ballistics
Рет қаралды 2,1 МЛН
The Worst Plastic Scale Model Kits I Built in 2024!
15:37
Model Minutes
Рет қаралды 102 М.
Let's Check Out The New/Old Revell '66 Malibu Model Car Kit. Ep.220
24:37
The Luka Cee Channel
Рет қаралды 6 М.
Aftermarket & 3D parts & where I get them
30:08
RB Model Works
Рет қаралды 4,1 М.
How to Perfectly Align, Hinge, & Scale Trunk Lids & Doors
15:00
Model Car Muse
Рет қаралды 56 М.
Episode 26 How To Not Have Chrome Parts Look So TOYISH
24:45
The Luka Cee Channel
Рет қаралды 115 М.
Barn Find Rare Handmade British V8 muscle car - will it run?
28:42
The Late Brake Show
Рет қаралды 1 МЛН
T-90 From Revell Is The Worst Model I've Ever Built
18:36
Night Shift
Рет қаралды 1,6 МЛН
Cracking the seal on a 58 year old antique IMC GT 40 model kit!!
18:46
Model Car Videos
Рет қаралды 4 М.
Bench Racing The AMT 70 & Revell 68 Chevelle Model Car Kits Ep.305
21:11
The Luka Cee Channel
Рет қаралды 21 М.
УНО Реверс в Амонг Ас : игра на выбывание
0:19
Фани Хани
Рет қаралды 1,3 МЛН