OneBlade To Rule Them All! | Single Cut Nippers EXPLAINED | GodHand vs DSPIAE

In this video I'd like to speak a bit about fundamentals of cutting the plastic with nippers and answer the question - what so special about Single Cut nippers. Also it's gonna be a review of DSPIAE nipper (ST-A 3.0) and how it compares with my favorite GodHand nipper. Enjoy!

[@farraseldy3121]

thanks for the review. 90% godhand quality with half the price and better availability really sells it! especially if you sand the parts afterwards anyway

[@slcat]

Yep, it anyway makes the whole process a lot more fast and easy so it is worth investing

[@LoliconSamalik]

Another way to prevent damage to a single bladed nipper when removing a part is to cut at a 45 degree angle diagonally. This causes the gate and sprue to actually move, assuming the plastic isn't too rigid. It also helps with future cuts to cut in the opposite diagonal, meaning if you cut diagonally left, the other side, you cut diagonally right.

[@slcat]

Yep, I found it works too, especially if the nubmarks are quite tiough (old kits have that a lot)

[@crimsondeception]

I didn't know about the rule to never cut from the sprue with the single bladed nipper... my DSPIAE chipped because of it... I wonder why my GodHand entry nipper ($20) was still in good shape despite being inferior... man... this hobby is great but so many expensive mistakes to learn from...

[@ObjectiveMedia]

Thank you for the great explanation dude! ❤

[@weaselwolf]

The Dspiae is just as good as the godhand IMO, meanwhile if you take the insert out of the case it comes with you can fit a full gunpla toolkit in there. I've got the nippers, a retractile x-acto with extra blades, some glass files, some parts separators and a panel liner all in there.

[@slcat]

Well, everyone has some personal experience, I'm just saying how it feels for me ^_^ And yeah, taking the toolset from Dspiae is very good move too, there are a lod of good stuff in there for the price

[@gabechristopher8040]

look up the hobbymio gunpla kit, it is absolutely insane

[@foreverendeavor7383]

I’ve said it before and weather people believe me or not, I like my DSPIAE ST-A 3.0 more than my God Hand SPN-120

[@zulerodoeht329]

I'm with you on that one. I have 3 pair of the DSPIAE nippers, all are the high end of the line.

[@GundamWay]

Интересно какой будет следующий этап технологического улучшения? 🤔 Как их сделать еще лучше? Сменное лезвие и более тонкое?

[@slcat]

Мне кажется тут уже мало куда можно двинуться. Тоньше лезвие вряд ли, улучшения по металлу непременно скажутся на стоимости, ну и т д. Даже этот инструмент (годхенды кстати уже очень давно производят) выглядит по сравнению с классикой какими-то космосом, хотя на деле все просто)

[@Hagen_Strolh]

А со сменными лезвиями уже вроде как WAVE выкатили

[@rm709]

Should include an affiliate link for your efforts. Would totally help find the right product 😊

[@slcat]

It's not always possible, unfortunately (in my case it's not). I could insert some links to the products but while people have different places to buy the stuff (in different parts of the world) it's up to them to decide. I just share my experience, nothing more.

[@clanpsi]

I find it ironic that GW's nippers are the worst on the market.

[@slcat]

Why I'm not surprised ^_^

[@yunshan1984]

DSPIAE性价比更高 godhand的钢材不易上锈