Рет қаралды 20,206
OnePlus 5 Screen Replacements and Repair Parts: bit.ly/2t8Ggh2
Watch the Official OnePlus 5 Display Assembly Repair Guide. Following the step-by-step OnePlus 5 screen replacement instructions we have provided will help you safely fix a cracked or damaged 5.5" AMOLED display. Visit Fixez.com for all of the DIY OnePlus 5 replacement screens, parts and tools you need to fix your phone quickly, and affordably.
If you need your OnePlus smartphone repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your device for you. They are available Monday - Friday, 9am to 5pm PST.
Subscribe to our KZbin Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
OnePlus 5 Display Assembly Repair Video Steps:
Step 1
• Power down your OnePlus 5 phone.
Step 2 (OnePlus 5 Dual Nano-SIM Card Tray)
• Eject the dual Nano SIM card tray.
Step 3 (OnePlus 5 Rear Case)
• Remove the following 2 T2 Torx screws from the bottom of the OnePlus 5.
• Use the plastic triangle opening tool to release the clips and then pop the OnePlus 5 out of its space-grade aluminum rear enclosure. There is no pesky adhesive, making this procedure a snap.
• Before you can separate the rear case, you will need to disconnect the USB-C port and headphone jack cable to free it from the phone.
Step 4 (OnePlus 5 Motherboard)
• Detach the battery connector.
• Remove the following 7 Phillips screws.
• Disconnect the bevy of cables, including the one on the other side of the motherboard.
• With the cables and screws out of the way, free the OnePlus 5 motherboard from the phone.
Step 5 (OnePlus 5 Dual Rear-Facing Cameras, Earpiece Speaker, and Vibrator)
• Easily remove the 16-megapixel dual OnePlus 5 rear-facing cameras.
• Pluck out the spring-contact-connected OnePlus 5 earpiece speaker.
• Pry the vibrator up from the chassis.
Step 6 (OnePlus 5 Loudspeaker)
• Remove the following 6 Phillips screws.
• Extract the OnePlus 5 bottom loudspeaker assembly.
Step 7 (OnePlus 5 Battery)
• Remove the interconnect cable.
• Use the exposed clear plastic pull tab to peel the 3300 milliampere-hour (mAh) battery off the adhesive securing it to the OnePlus 5.
Step 8 (OnePlus 5 Earpiece Speaker, Power and Volume Buttons Cable, and Signal Cable)
• Use the spudger to pry up the small daughterboard.
• Disconnect the display cable.
• Remove the clear tape and then peel the interconnect cable off the adhesive securing to the phone.
• Remove the signal cable from the side of the midframe.
• With the tweezers in hand, carefully extricate the OnePlus 5 power button cable, volume buttons cable and NFC Antenna.
Step 9 (OnePlus 5 Display Assembly)
• Use the heat gun to warm up the adhesive securing the 5.5” OnePlus 5 display assembly to the frame.
• Use a triangle opening tool to start slicing through the adhesive.
• Take your time and apply additional heat as needed. Patiently work around the OnePlus 5 AMOLED display with triangle opening tools.
• Once you have sliced through the adhesive, be mindful of the display’s cable and the cables for the bottom buttons when decoupling the screen assembly from the frame.
* To reassemble your device, follow the steps in reverse order.