OnePlus Nord N200 5G Disassembly Teardown Repair Video Review

[@markmasi4226]

thank you for this video, I got my phone wet and was able to take it apart and dry it out thanks to this video. it now works perfect!

[@PBKreviews]

You're welcome, glad it helped! :)

[@Roiikka]

Thank you! Doing a board swap soon. Easy as anything. Much appreciated!

[@snowy_canada0955]

are all the screws same length?

[@FirebirdDude]

Thank you for making a great video!

[@PBKreviews]

Thank you and you're welcome :)

[@samparson9604]

Awesome video man!

[@PBKreviews]

Thanks, glad you enjoyed it!

[@jugnusaikia8066]

Eres gran señor

[@linuxranch]

Hi, thanks for the video. How much of the phone needs to be disassembled just to replace the battery? Thank you

[@PBKreviews]

Hi, you're welcome. You would need to remove the back cover, the screws and back housing, and then you would have access to disconnecting the battery cable and removing (prying off) the battery. You would not need to take anything else apart at that point.

[@matster4160]

So mine fell out my packet while closing the car door and got jammed into between it works still but now it's bent, is it possible to bend it back? And if so how much must be dismantled in order to do it

[@harrykrishna2697]

Thanks for your video. What size are the screws?

[@PBKreviews]

You're welcome. Most smartphone Philips head screw drivers would work, but I use a 1.5

[@kunteajit]

How did you remove right most middle screw near the camera? Looks like its not a screw like others. 0:34

[@Cricketmane]

It IS A BACKPLATE?! Nice. This seems fairly well designed and easy-ish to work on. My screen panel got loose on a corner and ended up ripping completely off. Should be able to fix it for like 30$ :D Edit: I would like this video twice is I could. Thanks!

[@erevhaqets7613]

Do you know if there is a secondary microphone on this device?

[@PBKreviews]

yes, on the top of the motherboard

[@jugnusaikia8066]

Vous êtes super monsieur

[@PBKreviews]

👍

[@jugnusaikia8066]

대단하십니다 선생님

[@PBKreviews]

👍

[@garysinclair6490]

Thanks for the video. I was able to replace the screen based on this video.

[@PBKreviews]

You're welcome!

[@cecilepuckhaber1067]

Did you have to take the whole phone apart to replace screen or just the front?

[@PBKreviews]

@@cecilepuckhaber1067 Ya you would need to remove the back plate, the screws on the back housing and remove the back housing giving you access to disconnecting the battery cable and the screen cable from the main board, then prying off the battery so you can run the cable for the screen through the opening in the midframe and pry your old screen off, apply adhesive and re apply your new screen making sure to run the cable back through the opening in the midframe and re assemble the phone. If you have a screen with frame pre installed assembly, then you would move all your parts (motherboard, front facing camera, speakers and vibrator motor etc to the new frame and re install the back housing and cover.

[@garysinclair6490]

@@cecilepuckhaber1067 The whole phone. The video shows what the bare minimum disassembly is to replace the screen.

[@inkre-2671]

I took of the thermal pate what would I use to replace it ?

[@derpderp1633]

More thermal paste..

[@jayf4357]

How do i replace just the headphone jack. Mine didn't work out the box

[@jugnusaikia8066]

אתה נהדר אדוני

[@PBKreviews]

👌

[@shiv1g]

What do you do with the devices after the teardown?

[@PBKreviews]

They are sold off to recoup costs for future videos.

[@shiv1g]

@@PBKreviews what platform you use for reselling?

[@PBKreviews]

@@shiv1g usually ebay or I sell them locally

[@mgomez5606]

​@@PBKreviews what is your ebay store name?

[@birdenthusiastg5570]

Thank you!!

[@PBKreviews]

You're welcome!

[@jugnusaikia8066]

あなたは素晴らしいです

[@jugnusaikia8066]

आप महान हैं सर

[@PBKreviews]

👍

[@hahayesitsme212]

honestly better then JerryRigEverything

[@PBKreviews]

Thanks!

[@pimpinal004]

Awesome

[@sumitmehra5101]

HOW MUCH TO DISASSEMBLE TO CHANGE LCD WITHOUT FRAME?

[@PBKreviews]

Not sure, depends where you buy it from. The LCD without frame runs around $45-$50 USD.

[@RobertL39]

Not clear what "adhesive" you're using to reapply the back plate. You have 2 "adhesives" listed in the list of tools but don't say which you use where, and the Amazon links give me about 3-4 different double-sided tapes. Can you clarify? Ditto for replacing the screen; which adhesive to attach it to the mid-frame? THANKS!! GREAT videos!

[@PBKreviews]

for the battery door/back plate, you can replace it with a new battery door cover that has the original adhesive pre installed like this one: www.ebay.com/itm/185336010276?hash=item2b26e31624:g:Xw0AAOSwEGVhh6go or you can watch this video explaining more about the adhesive etc: kzbin.info/www/bejne/imXMmoOLfrJqY7s same goes for the screen adhesive.

[@RobertL39]

@@PBKreviews a thousand thanks!

[@peggygriffiths2091]

Didn't work for me, I'm still struggling to get this phone apart

[@cooper1095]

looks like oneplus is making a blue only phone again, like the 7t pro... :(

[@jeff033]

Hi Mr pbk need help i brought a s10 5g in Phillipines and it has no 5g signal My unit is korean variant and some other says if the s10 5g is korean it has no 5g antenna 😩 I hope you review again the s10 5g about the 5g antenna 🙏

[@PBKreviews]

Hi, you need to make sure the 5G bands on that version will match with the 5G bands on your network so it will work with it

[@jeff033]

@@PBKreviews some others says if you're s10 5g is US variant yung will get 5g signal unlike the korean variant I watched your teardown on s10 5g its the same there's some missing parts on the left side thats where the 5g antenna located im a bit disappointed to my phone 😞

[@PBKreviews]

@@jeff033 the korean variant is 5g also but its sub 6 ghz 5G. Those extra antenna you are referring to is mmwave 5G antenna. If your network uses mmwave then you would need those antenna yes, but if not then the regular 5g version should work unless your network bands dont match. What network are you trying to use it on?

[@dedikmahendra8242]

One plus is oppo in usa version, good strategy from this BBK company

[@PBKreviews]

👍

[@jugnusaikia8066]

你是偉大的先生

[@brentamania89]

The camera housing is too big for the size of the cameras it's overly big those cameras aren't that big

[@jugnusaikia8066]

вы великий сэр

[@PBKreviews]

Thank you! :)

[@hahayesitsme212]

Which country are you from?

[@PBKreviews]

USA

[@nexusmc9209]

Just wanted to leave a comment here so that there are 69 comments 🎉

[@chukchee]

That is brutal! Free Navalny! Free Navalny! Free Navalny!

[@justinhunt1025]

dope I have 3 of them... they kept getting run over

[@PBKreviews]

lol

[@coldheartedjay2124]

I don't have anything to take my back off and my phone stop charging

[@jugnusaikia8066]

हजुर महान हुनुहुन्छ

[@PBKreviews]

Thanks!

[@Rakeshsharma-bf9sz]

Realme gt master explore edition teardown video request

[@PBKreviews]

Hi, that one has been done by many people already so wouldn't be worth spending money on doing that since it probably wont get many views.

[@PBKreviews]

I decided to order the phone and do the teardown, so should hopefully have it done in a week or so.

[@D_Q001]

OnePlus Nord 2 teardown

[@PBKreviews]

Will have it done in a few days. :)

[@D_Q001]

@@PBKreviews Thank you

[@PBKreviews]

You're welcome

[@elijahx2784]

oh yeah im cooked gg

[@jessicaalbright4389]

Blah