1000HP TURBO HAYABUSA BUILD PARTS OVERVIEW/ INTRODUCTION. HP TECH

[@busa-beemer3870]

What I love about BCP is he doesn't just hang a turbo on a bike, he builds a different machine with a high level of sophistication. Can't wait to follow this build.

[@BoostedCyclePerformance]

Thanks for the compliment.

[@martybrozek7973]

Thank you for taking the time to do this for us Rob, been a fan of yours for a long time. The thumbs down had to come from an H2 Rider LMAO

[@jean-pierreart891]

these guys doing a good job....event if I find the Busa the moos ungly

[@philwood472]

Thanks for the mention, good luck with the build. Update. The street legal BigCC bike went 272mph last time out.

[@AbhinArali]

Subscribed and looking forward to this crazy build. Robert is a great builder and his attention to detail is second to none. Some really great, tasty parts. His genius really comes alive in tuning, with electronics. Great job Rob.

[@nikolaiownz]

Hell yeah. As a busa racer that wants to turbo My bike one day i am excited to se this 👍😁

[@BoostedCyclePerformance]

Check out my 500hp for $1500 build series and see where you may be able to save some money.

[@nikolaiownz]

@@BoostedCyclePerformance Thanks mate

[@rarebreed6933]

If I'm not mistaken, Bill Warners bike made 1000 hp, bike went 311 mph in a standing mile, crazy bike

[@BoostedCyclePerformance]

Actually he went 311mph in 1.5 miles in loring Maine. He died trying to go 300 in a mile.

[@Drummerjeffkazee]

Love the time you spent making this video! Gives me alot of ideas 💡...

[@dg8062]

So cool to watch. I bet you could get close to $100k into a tip top turbo busa. Could only imagine the thrill of throwing down even 400-500 real world hp. So cool👌

[@fokjohnpainkiller]

100k?! 😂😂😂😂😂

[@havasu1326]

I’ve never seen any of your videos. But I love what I see. I subscribed

[@BoostedCyclePerformance]

Glad to hear! Thanks for watching.

[@nickrider5220]

Wow, thanks for posting this build. I love engineering and bike builds, it makes my efforts look lame ! I'll be eagerly awaiting new posts. By the way this bike will be utterly MAD !!!!! 👍👍

[@BoostedCyclePerformance]

Don’t put yourself down like that. We all started somewhere. As long as you’re enjoying whatever it is your doing, and maybe learning something, thats all that really matters.

[@idoskidsattheawesomeauzzie9255]

WOW MAN.... Thanks for working ALL of this out for All of us. As we’re starting a new build on Saturday. Not that we’re chasing 1000hp. As we’re only starting with 300 to 350hp, but still this is a GREAT insight for what we’ll be chasing going forward. Ps: GOOD LUCK with your 1000hp Build, & YES 👍 Absolutely, We’ll will be Watching over here at “IdoSKIDS” in Brisbane, Queensland Australia 🇦🇺

[@BK-ew2nl]

Do you do any case mods for added oiling?

[@BoostedCyclePerformance]

No sir. I also use stock oil gear, with a high pressure valve. If your bearing clearance are set right, that’s all that’s needed.

[@BK-ew2nl]

@@BoostedCyclePerformance what’s the tricks to the bearings. Old pyshobike article’s reference tight in mains and a bit loose on rods. Do you have any recommendations for tolerances. Drag application only

[@jonaspensar3803]

Really nice build. Excited to follow the project. I got the maxxecu race to my zx12r and running it on e85. By the way, maxxecu is made in Sweden and is a really nice package. Just want to finnish my zx12r turbo project so I can switch to Busa later🤙🤙🤙🤙 thanks for all the good tech info 🙏🙏

[@062000mathu]

Is the over sea company motech?

[@BoostedCyclePerformance]

No, it’s MAXX Ecu.

[@Encyphix]

Once again, very well done. For me, it's just the right level of detail. Thanks

[@BoostedCyclePerformance]

Thanks for watching, and thanks for the feedback.

[@FirstLast-tx3yj]

@@BoostedCyclePerformance amazing video... what is the weight of the wossner pistons and rods please..

[@blvckparis.]

This bike absolutely will destroy all supercar & other bikes for sure…!! 🔥🔥

[@xountapapadopoulos3535]

*BUSA THE KING*

[@ismaeltorres8848]

Hey I’m trying to us it for a sand rail build

[@shaban2374]

love it but wasnt the charge air tube to close to the turbo manifold

[@jairoalberto173]

Man what a nice build! Definitely staying tuned for this one.

[@BoostedCyclePerformance]

Thanks brother, hope you’re doing well!

[@minhazhaque5340]

@@BoostedCyclePerformance how garrette gt 3582 produce 1000hp?

[@bassnbusa2853]

Love the videos! Thank you for the great and informational content.

[@BoostedCyclePerformance]

You’re very much welcome. Thanks so much for watching.

[@matts4025]

subframe is insanee. wish i had a shop i could build mine with and do some lsr evemts

[@SAM-zt2uy]

Seen the Big CC bikes run at Santa Pod and the now closed Shakespeare Raceway

[@BoostedCyclePerformance]

Santa pod is a bucket list item for me. Such a cool track.

[@JacobAtkins99]

Is there such thing as a billet block or head for the hayabusa

[@BoostedCyclePerformance]

@@JacobAtkins99 sure is. Billet high port heads too.

[@busabros2480]

excited!!!! is an understatement

[@rifleman7313]

Just curious about how to use a Hayabusa in a modified MG Midget, Miata or other small lightweight car.

[@BoostedCyclePerformance]

Stay tuned as I have an MG that I’m putting a turbo busa engine in.

[@rifleman7313]

Just curious about the MG that you mentioned putting a turbo busa in. Any progress, would like to know of any or even better see it in a short KZbin video if possible. Thanks

[@BoostedCyclePerformance]

@@rifleman7313 I have the car and the idea, just no time to do it right now.

[@fredriksteen9765]

I'm really glad that you are trying, it's about time someone will attempt the 1000hp mark. Hope my Facebook forum post gave you some more views 🙂

[@BoostedCyclePerformance]

Thanks for the support and sharing. There was a lot of good conversation in the comments. And for as crazy as the build is, there’s a lot of guys on that page that I really respect for how long they’ve been doing this stuff. But I even saw them being overall optimistic about the success of this build.

[@busabros2480]

994hp at the wheel has been done with a busa here in the UK. which is well over 1000hp at the crank

[@minhazhaque5340]

@@busabros2480 who is ever done?sean mills?

[@busabros2480]

@@minhazhaque5340 yeah exactly him. but 1000hp at the wheel would be incredible to see!

[@minhazhaque5340]

@@busabros2480 yeah right sir.

[@bryanemerson5619]

TECH QUESTION: how do you size the crank and rod bearing clearances with boost? Do you differ from factory spec?

[@turbotoaster1984]

Im not sure if your ever going to see this, but im using those 81mm gen2 wossner hayabusa pistons in a car engine(89.3mm stroke) and we have taken it over 800bhp with over 500ftlbs of torque so the 18mm pins are putting in hardwork, plans to turn it up to 900-950bhp this summer on a GTX42 we have fitted, we only rev to 10000rpm because of the stroke, so looking forward to how you get on yours.

[@BoostedCyclePerformance]

I read every comment. Yeah, even though the pins are 18mm, they have massive wall thickness. I think that’s the key.

[@onetwoyouadeadman]

Where did you guys max out on those pistons?

[@RishiMoonien]

Cud have a number for you sir

[@knightwindsrc2314]

Very similar to my 2013 in form and style. Me and the bikes owner see things very eye to eye. The only difference so far is the carbon tail which thanks to you i will be ordering, and my bst fits a 240 rear. Not sure how big yours is but if its anything like mine it will looks awesome. Mine makes 571 at the wheel right now and i will be keeping a close eye on this build.

[@BoostedCyclePerformance]

This is a 200mm tire on a .625” wider wheel. If you watch part 2 of this build I mount it up on the bike. Looks great.

[@jaybavis5896]

Are these builds for just racing or everyday riding

[@yadiggyea91]

Is it possible you include. Part numbers for the wossner amd ape components

[@sopheakhorng5221]

hey quick question how much does the engine cost??

[@ericsanford5639]

i like the way lucy looks, i wouldnt change a thing.

[@DARKORBITPYRO]

@Boosted Cycle Performance Great videos! Can you please post the complete parts list in the description or chat? (If someone already has that online can you please tag?)

[@BoostedCyclePerformance]

Thank you. I don’t have a text list, but I showed everything in the video.

[@DARKORBITPYRO]

@@BoostedCyclePerformance thanks for the reply. All in how much is a build like this engine and transmission only? I'm building a kit car and want to use a Hayabusa engine running around 500 hp. Want it to be reliable on track (circuit).

[@blackbushido]

Excellent video. I can’t wait to see the outcome!!! Thank you very very much!!

[@wdfaws8124]

What kind of torque/horsepower can those transmissions handle? I guess you'll find out.

[@JoshCVeteran]

How much would you charge to update a OEM busa and add a turbo with just exhaust ports out to the side and deleting the OEM stock exhaust?

[@symplafly]

When's the next vid coming?

[@BoostedCyclePerformance]

It will be a few more weeks. Thanks for watching!

[@achilledipalma4791]

Stock shifter is strong enought? If yes, only the hayabusa shifter Is strong enought? Or generally the bike shifters are strong enought?

[@BoostedCyclePerformance]

Most are strong enough. It’s the kill time that hurts transmissions.

[@achilledipalma4791]

@@BoostedCyclePerformance Sorry, but what's the kill time?

[@onmygrind3854]

Me: My Busa makes 1000 hp Wife/girlfriend: Do you need that much power? Me: Do I need you?

[@DerHeff4]

I have questions about using a GSX1300R in a side by side. What would be the best build for that application.

[@jimmykelly2809]

The liter bikes are all caught up to my Gen1 it’s time to turbo the Busa now

[@axenussSRT]

i have maxecu race too.the best ecu.

[@cbx1168]

Hi who makes the infrared sensor? Thanks

[@hayabusa_guy]

Where can I buy those carbon fiber dash panels for my Gen 2 Hayabusa? I'm not seeing them on the Montgomery website.

[@BoostedCyclePerformance]

I ordered them off the Montgomery website. Maybe they’re out of stock? 🤷‍♂️

[@Mansour46]

Where can I follow this bike?

[@BoostedCyclePerformance]

Click subscribe and the bell to get notified when I post more videos.

[@Phoenix-mb2be]

Do you have a Suzuki tl1000r upgrade video?

[@BoostedCyclePerformance]

The best upgrade is to sell the TL, and buy a Busa.

[@cedricalexander9274]

Ik its been 2 years since you made this video but I want to know where you got that airbox from cuz I want to do turbo on my bike.

[@BoostedCyclePerformance]

When you’re ready for one, get with me and I can get you set up with one.

[@cedricalexander9274]

@@BoostedCyclePerformance ok thanks

[@mokokawi]

Very cool parts...this will be a badass bike

[@jdmimportlogistics]

So good mate thanks for putting together this series. Any idea what happened to JFC Racing based in WA that were doing the billet Hayabusa V8 N/A and turbo engines?

[@BoostedCyclePerformance]

I have no idea.

[@marvinbillups5539]

Where are you located?

[@blacklimited7458]

Cool Video, can you show more details about the intercooler?

[@BoostedCyclePerformance]

I’ll be covering more about that later in the build.

[@muellerpk]

Do you sell complete packages? i have a stock 17 busa and im ready to turbo it...only maybe 400whp though

[@BoostedCyclePerformance]

Yessir. Complete if you’re going to build it yourself. Or I can do turn key, the whole build and tune.

[@saschafischer7400]

what's the total cost for a setup like that

[@BoostedCyclePerformance]

A lot.

[@saschafischer7400]

lololol good answer

[@Toaster193]

Subscribed and the best of Luck!, As the car guys will tell you, there is no substitute for cubes.

[@BoostedCyclePerformance]

Thanks for watching! I’m heavy in the turbo LS world, and have a 500hp sr20 240sx. There is indeed a replacement for displacement, it’s called volumetric efficiency. The boomers don’t like hearing that.

[@Toaster193]

​ I guess back in the day someone had the idea to use 'car parts' in turbo applications for bikes to make bigger HP. Boomers ?

[@thefrenchcarguy]

What’s the gearbox in this ?

[@BoostedCyclePerformance]

@@thefrenchcarguy stock, back cut trans.

[@taybiljam]

What will haopen with this bike in the end when finished keep it, sell it race it??

[@BoostedCyclePerformance]

It will be raced in the major 1/2mile, and roll race events.

[@taybiljam]

@@BoostedCyclePerformance keep us updated plz. And im realy enjoying the vids mate im all the way from Australia keep it up. Ur getting better at talking to cam i think u sounded little nervous first cpl any congrat hope to see more

[@karlosmuschek]

Epic videos mate👌👌🔥💯

[@BoostedCyclePerformance]

Thanks for watching

[@MarkWebb-xl5uf]

How much is all that?

[@rhetericalpha]

BIG CC is the shop you're referring to. The red bike that broke the strap on the dyno

[@BoostedCyclePerformance]

I know, I even flashed that on the screen at that part of the video.

[@rhetericalpha]

@@BoostedCyclePerformance i seriously apologize haha I was making lunch while watching the video. I must have been away from the phone at that point. Looking forward to seeing the build.

[@chippyjohn1]

9:10 doesn't it say 17,000 rpm?

[@BoostedCyclePerformance]

No, just 14k rpm.

[@MRR-qv3bw]

Can you turbo my BMW S1000RR M? Is it possible? The first time I took off my air box I realized how different this motor is compared to anything I've ever seen before. It's like my throttle body is two separate pieces. You would know better than I would have you ever seen anything similar? Love the vids man and the info you give is PRICELESS!

[@BoostedCyclePerformance]

Anything is possible, just costs money.

[@t.dennis8595]

Great video. Why did you decide to go with Wossner pistons and rods?

[@BoostedCyclePerformance]

Thank you. Wossner is what I’ve always used, and never had any issues or concerns with them that would lead me to use something else.

[@t.dennis8595]

@@BoostedCyclePerformance one more question, well actually two. How hard is it to get the knock sensor inputs to work? I heard since the transmission was enclosed in the same case, it can't monitor it. Also, I heard you mention in your piece "variable valve timing". How will the ECU monitor that? Thanks in advance.

[@jasonkeating9958]

Are you going to do a few vids on the actual build and tune as this is easily the most existing build on KZbin I haven't seen another turbo build like this, Also a vid of it destroying the streets would be amazing I'm sure i speek for on here wanting to see that and more👍

[@BoostedCyclePerformance]

Thanks for watching! But yes I’ll be documenting the whole build with the exception of the engine. A lot more goes in to building a stoker engine then just a pistons rods set up, so I don’t want to make engine building seem more complicated then it is for someone watching that’s contemplating building their own. It’s being built to be able to be ridden on the street reliably, but most of the racing will be at events.

[@jasonkeating9958]

Tnx 4 reply the only thing this is missing are some ohlins front and back lol

[@BoostedCyclePerformance]

Doing ohlins forks wouldn’t benefit the bike at all as it’s a straight line bike. The front wheel is there for landing gear pretty much. 😂 I do a penski shock for the rear.

[@minhazhaque5340]

@@BoostedCyclePerformance but as far as I know garette gt 3582 max produce 600hp.

[@simon2knine]

You must have very deep pockets...A lot of very expensive parts are going on this bike.. I think you are going to create a monster.

[@minhazhaque5340]

After build how much price & is it street legal.how to contact him.

[@BoostedCyclePerformance]

Completely street legal.

[@minhazhaque5340]

@@BoostedCyclePerformance how to contact him

[@BoostedCyclePerformance]

@@minhazhaque5340 what do you mean by him? The owner of the bike, or me, the guy building the bike? What do you want to know?

[@minhazhaque5340]

@@BoostedCyclePerformance the guy building the bike.

[@minhazhaque5340]

@@BoostedCyclePerformance but gt 3582 kit produce max 600hp

[@luciodemas91]

Salve, i pistone sono 81mm o 80,88?

[@BoostedCyclePerformance]

81mm

[@leenettles89]

How much for this setup?

[@BoostedCyclePerformance]

Over $50K

[@c.g.g.1905]

Subbed! I hope I can one day do soMe thing like this to my new 2020 CB650R

[@BoostedCyclePerformance]

Would be interesting to see.

[@mysteriousvictorious18]

Can this bike reach 260 MPH??? Please reply

[@jimmykelly2809]

1000 hp Busa? Unreal bro

[@bicivanaswegen2077]

Great man, will be watching form South Africa.!!

[@BoostedCyclePerformance]

Thanks for watching. It’s cool to know people are lookin at my ugly ass all over the world. 😂😂

[@minhazhaque5340]

@@BoostedCyclePerformance how to contact him?price & is it street legal

[@dalejustice9207]

Buddy I am so glad I found yr channel. I always built n raced mustangs n stuff n I always loved my bikes but really never got into them. I have a spare turbo I would love to put on my liter bike. I have looked for the tubing parts n header, but can't find anything. Is there a place to order the header flange n tubing to make a kit. Idk if using pie cuts like on my racecar would honestly hold up. I have never installed a turbo on one. But like y said in the beginning if y can work on cars y can these. But Im goin to go back thru yr videos n check them out. Thanks for the videos n God Bless!!

[@BoostedCyclePerformance]

I’m so happy to hear this. My goal is to inspire the average guy to do the work themselves. Depending on the bike you have there might be header flanges available for it. But likely, you’ll have to make something yourself. As far as tubing, sch 40 stainless weld elbow are common. Myself and rcc use just standard .070 wall stainless tube. Bike turbo headers are very tricky.

[@dalejustice9207]

@@BoostedCyclePerformance Where is a good place to order the piping at? I also thout about using Nitrous, n I kn on my car for every 50 hp I retard the timing 2 degrees, or may be 3 just depends on how hott the day is. I don't know if the Nos controller is the same as on a car or not setting it up to come on n stuff. But Buddy I sure do appreciate ya alot for taking the time to do these video's.

[@TheBAIN1]

Aye where u located and are u still building bikes

[@BoostedCyclePerformance]

Located in Houston Texas. Yes still building bikes, but not taking on anymore work currently due to workload being way too high.

[@TheBAIN1]

@@BoostedCyclePerformance ok im goin to join the channel to keep up on your availability and stuff im In Florida so it's not like I'm in a huge rush

[@barneymiller7894]

1000hp won't work off the hit, even from a roll. But with boost by gear, good tuning, and a great setup this thing could be a legitimate top end monster.

[@BoostedCyclePerformance]

No shit. Boost by speed > boost by gear

[@imlostgaming9542]

Don't know how to build an engine but I got this!

[@BoostedCyclePerformance]

That’s the mentality!

[@jaybavis5896]

Like the video I subscribed I have a 2020 busa I sure can use your help lol

[@smvsounds]

BigCC from England

[@BoostedCyclePerformance]

If you watched the video I referenced big cc. I’m not sayin this is going to be the first 1000hp busa. The goal of this build is to utilize the latest and greatest technology to see how much of that power we can actually use.

[@smvsounds]

You said it later in the video after I sent it!🤣 great video! I use to race against Seb back in the ProStar days! I was one of the first pro street racers to use his ams1000 in 2006-07

[@smvsounds]

Seb of NLR was the first Pro Street Racer to use a side Mount and inter cooled turbo on a Busa!

[@kanggoo57]

ive seen a 962 horsepower busa on a dyno, that thing was scary

[@BoostedCyclePerformance]

I’ve seen that too. I’ve built many bikes that are capable of well over 700hp, but usually stop tuning at the dyno around 600. It’s unnerving how you start to feel things start to move around on the bike when strapped down making that much power.

[@TreadTalk247]

Whatever happened to the channel? I enjoyed following along w the builds!

[@buickkkkkk1]

Of Course, if you don't want to work on bikes anymore, I would check out NASA , or L3 Communications , or the Skunk Works a Lockhead Marten division .......

[@BoostedCyclePerformance]

Been tossing around going to SpaceX…

[@buickkkkkk1]

@@BoostedCyclePerformance I worked on airplanes as a A&P for 18 years got a invite to space X abought 8 or 12 years ago when they first got going , I can tell you looking back I wish I would have went..

[@SanjanaRanasingha]

Lovely

[@MichaelSmith-np4xc]

Did you see the new release of the next Hayabusa will be February 8 Suzuki has a teaser trailer. I would like you to build me a Hayabusa I'm leaving for the Air force but would love to talk to you about a build

[@BoostedCyclePerformance]

No joke, within 15 minutes of suzuki posting that video, I had at least 10 notifications over all platforms of fans tagging on that. Hit me up when you get out, and we can map out a build for you.

[@maynardholmes8870]

My question is how hot is that thing going to run because the older generations would always overheat anyway, I’m just waiting for somebody to put a rocket engine on one of those an extended swingarm a little bit further just kidding

[@eL.19x]

why am i watching this i have no bike and can't even change a air filter on a car

[@jaybavis5896]

Because this is fun

[@jasonkeating9958]

Wow

[@jamessimpson7485]

I will like to bring you my bike you to you to install a 600 h

[@BoostedCyclePerformance]

Just say when.

[@themanthemyththelegend1392]

Whew with the big stroke crank piston speed fast as fuck boi, rods become basic maint... Pain in the ass.

[@bodymaxxfitness279]

When your trying to make HUGE power with boost rod bearings are always "basic maintenance” for sure! But high piston speeds are pretty common in todays high reving 4 holes. Case in point Honda cars!

[@virtualrider]

Nice🏴‍☠️🏴‍☠️🏴‍☠️🏴‍☠️

[@jamessimpson7485]

Sorry about that I didn’t finish what I was trying to say. I will like for to install a 600 horsepower turbo on my one of my Hayabusa. I have a gen one and a gen two hit me back. By the way I am James.😊

[@BoostedCyclePerformance]

That’s pretty much what I figured, and my response is still the same. Lmk when you’re ready.

[@cmorlok]

Going to a fun build to follow!!! @mooremafia you seeing this??!!!

[@markevans5189]

I'm interested in having someone build my Hayabusa engine. 1000hp.

[@BoostedCyclePerformance]

You’re talking to the right guy….

[@markevans5189]

I would like to show you my project I build concept cars and I would like to know if the Hayabusa would be a good fit.

[@BoostedCyclePerformance]

@@markevans5189 email me your thoughts at [e-mail] let’s see what we can come up with. Your history and pics of your ideas would be helpful.

[@markevans5189]

I sent photos to your email

[@johnhartley3022]

Bringing funny bike to the street.

[@alex9046]

'if you can turn a wrench', me: ah well, pff of course yeah! 'if you can build a car engine' me: ...

[@BoostedCyclePerformance]

Eliminating the word “can’t” from my vocabulary in regards to learning new skills and abilities was probably the best decision I ever made. So don’t think that you can’t. A lot of people don’t think their a chef, but find that they can follow steps in a recipe and end up making a good meal. Building engines is just like cooking. Just follow the recipe (the manual) and you’ll end up with a good running engine.

[@Precisionhack]

Horse power is like money…. Too much still isn’t enough !

[@smvsounds]

Also NLR made a 1000HP

[@naomifox7899]

no

[@V8Lenny]

@@naomifox7899 NLR Sweden made 800 something on gasoline like 15 years ago.

[@naomifox7899]

@@V8Lenny no that was 701 and it was on christers johanssons bike.I know all those guys.

[@V8Lenny]

@@naomifox7899 717 in Sweden and they built it again with bigger turbo and other changes.

[@naomifox7899]

@@V8Lenny you mean when they did the s400 version with the barrel style throttlebodies etc built for hank booth?

[@HayabusaEngineSoundCH]

So cool👍☆彡☆彡☆彡☆彡☆彡

[@AFRO_KEEN]

I dont believe that can be done on an engine with OEM parts.

[@BoostedCyclePerformance]

Did you watch the video? It’s a built engine.

[@AFRO_KEEN]

@@BoostedCyclePerformance Okay.

[@AFRO_KEEN]

@Boosted Cycle Performance I thought you were implying that one can slap on a turbo or supercharger, reflash the module, and get tremendous power for less than $2000. I get it now. It's about a built-up engine that you are talking about and not just accessoriesries.

[@BoostedCyclePerformance]

@@AFRO_KEEN you have your videos mixed up my friend. This comment section is for the 1k HP busa build. I do have another series “500hp for $1500”. And yes you are right, the series is based on spending $1500 to upgrade your existing 230hp turbo Busa.

[@BoostedCyclePerformance]

@@AFRO_KEEN you have your videos mixed up my friend. This comment section is for the 1k HP busa build. I do have another series “500hp for $1500”. And yes you are right, the series is based on spending $1500 to upgrade your existing 230hp turbo Busa.

[@acruzadventures5856]

Bro!!!!