OpenTX Inputs, Mixes, Outputs Explaned Via Adding Switches

Get your stuff here:
RDQ Bardwell F7 30x30 Stack/Combo (JBF7 FC and 32Bit 50A 3-6s 4in1 ESC) at Race Day Quads - bit.ly/RDQBardwellF7
Bardwell F7 Flight Controller at GET FPV: bit.ly/BardwellF7GetFPV
iFlight 2207 Size Motors at GET FPV: bit.ly/iFlight2207-GetFPV
ifFlight 2207 2750 kv Motors at RDQ: bit.ly/2207-2750-RDQ
VTX similiar to the one in the video: amzn.to/39NaHl1
Options for FPV Quadcopter Frame - amzn.to/3ord7dV
FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Receiver - amzn.to/3dSNVYU
Radiomaster TX16S at Amazon amzn.to/3lifqP1
Radiomaster TX16S at RDQ: bit.ly/TX16s-at-RDQ
Radiomaster TX16S at GET FPV: bit.ly/TS16sMAX
Ovonic 4S 1550mAh 100C 14.8V LiPo Battery - amzn.to/3kuwMY5
Caddx Rattel FPV Camera - amzn.to/3juScmy
FPV Camera Transmitter Options: amzn.to/3krQ80b
FPV Racing Drone Props: amzn.to/3a5xTaw
FPV Goggles and Receiver: amzn.to/3b6fOuy
1-6S 30V Smoke Stopper Amass XT30/XT60 - amzn.to/2HENshq
More Stuff:
Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger: amzn.to/2Xwq5vT
Aluminium Standoffs: amzn.to/3eepCol
Black Spacers / Plastic Standoffs: amzn.to/2Rw4nVi
White Spacers / Plastic Standoffs: Spacers / Plastic Standoffs:
Drone Buzzer: amzn.to/2XxHBQs
Multimeter: amzn.to/2Rw5PHe
Soldering Iron (Budget): amzn.to/2XwlV7p
Soldering Iron (Much Nicer option): amzn.to/3cfuCHc
Soldering Station with Hot Air Gun as seen in video: amzn.to/2xhgui9
60-40 Rosin-Core Solder (LEAD): amzn.to/34zsx6h
Solder (Lead Free): amzn.to/2Ryp2I1
Helping Hands (Basic): amzn.to/3chQGRN
Helping Hands (As seen in video): amzn.to/2KdkyTr
Mini Screwdriver Set: amzn.to/3a20BsZ
Screws & Nuts: amzn.to/3ccjKtM
Heat Shrink Tubing: amzn.to/3c8gUG6
Rapstrap Cable Ties: amzn.to/2RBdzYt
Zip Ties: amzn.to/3ckqdDb
4pcs Hex Screw Driver Tools Kit: amzn.to/3a4Jo23
Magnetic Parts Tray: amzn.to/2XxZC1g
THIS PLAYLIST: • RDQ Bardwell F7 FPV Qu...
Radiomaster TX16S Beginner's How To Series - • Radiomaster TX16S Begi...

[@HerrRatzle]

Inputs/mixes discussion starts at

[@samavella8831]

Fantastic video. If you aren’t already, you should be a teacher.

[@emptyqrider]

Brilliant!

[@alumahomeinspections7009]

Hello Steve, your video was clear to understand each step configurating the Open TX companion on the Radiomaster TX16S. The radio reflected perfectly the data so, I could check that all the information was saved over there. But on my case I found no interaction or connection between the radio and betaflight on the receiver tab, is that a sign that they were not bound? Is it truth that the binding procedure does not have to be repeated, until one of the parts is replaced (manual text). I just repeated several times the binding without exit.

[@360vroomers]

Hi Steve. If we setup the modes in betaflight anyway then what is the advantage of adding the various ranges in the mixes? Doesnt betaflight override that anyway? Couldn’t I name something arm switch on my controller but in betaflight assign it to beeper or whatever? Thanks in advance.

[@sagittariusalba2851]

I have one question, the S3 solder connectors on the back board of my taranis X9D Plus SE 2019 are marked GND - V5 - SP.

[@ramjet0011]

Hello sir I'm new to this can you please help me I have a betafpv 85 pro2 and a jumper tx18 my problem is when I arm it the motor is not turning and about the throttle it is already halfway up before I can see the motors turn and when I pull it down the drone just jump and turn over, and when I push it beyond the halfway point the quad just jumps and zoom up. How do I fix that in my transmitter or betaflight Thank you

[@jefkaplinger2717]

So can i not change the function of the switch on the radio without betaflight? Can set the arm/disarm to work, without betaflight?

[@mrugrysek4201]

IMHO it is a little overkill to set switch in the radio this way. I just add a single mixer line on the channel with the switch as a source. Works the same way. For the rest of the video I found it very informative and I have learned new thing or two :-)

[@ubairsofi7568]

Hello

[@no-trick-pony]

But why do we need the "Inputs" in the first place? What benefit does this give me when in the mixer, yes, I select the [ARM] input as input.. but then i have to manually select the SF switch there again? Can't wrap my head around it..

[@coolblue32q]

Hi neighbor, West Charlotte here.

[@ammar6937]

what does the six buttons in the centre do?

[@jthepickle7]

...and I'm off to Tahoe Steve home to find #1 on the TX

[@brandonpurdy7658]

My switches want go past 1500.