For all garages and DIY'ers.. How to tell, if your DMF is good or bad. LUK says, that one DMF can hold for 2 clutch plates.
Пікірлер: 168
@Blackfourtrak6 жыл бұрын
Nice simple video, explained well, shame these things are so expensive to replace.
@iplaybose3 жыл бұрын
Come on it really isnt that expensive, theres a ton more stuff thats expensive compared to this
@skeimi783 жыл бұрын
@@iplaybose for hybrid golf ~3000€ with crankseal replacement
@hacinihousseyn97703 жыл бұрын
Now , I understand free play of dual massage, gold information , thank you very much
@jrockett6663 жыл бұрын
Great simple explanation. I really appreciate you taking the time, more people need to see videos like this… that simply get to the point and give you the data needed to complete the task! Thankyou!
@Tyranthraxus7 жыл бұрын
This is a good video just to demonstrate the way to measure not having ever seen one before. Also for mentioning the amount of tolerance allowed.
@matthewhawkins1065 жыл бұрын
Thank you very much for this Oskars. This is the very problem I have on my TD5 Land Rover Defender 130 right now. I have spoken to some Land Rover specialist mechanics, and they say that the DMF will still hold together, even in its poor condition, as to help you get around until you can get another one. Thank you for the information too, especially for testing the oscillation run out and tolerance level, as that is definitely good to know. Sincerely, Matthew
@lemagreengreen6 жыл бұрын
Thanks for this, I haven't done a lot of work on modern cars and have been given a clutch job on a car with a DMF and didn't know how to measure this. I'll be checking this tomorrow!
@ChrisS571713 жыл бұрын
So hard to find video explaining this.. Awesome job and thanks
@Johnwenn16 жыл бұрын
Well done a good explanation on how to understand the dual mass flywheel
@airbrushingbynick60716 жыл бұрын
Actually doing it is the key. That’s where you gain the experience and knowledge. Knowledge is POWER.
@tallowtreecrescent6 жыл бұрын
you couldnt explain it better or simpler. very easy to understand
@jameshill85644 жыл бұрын
This was great information I appreciate the time you spent making it
@a.americandad38853 жыл бұрын
Thank you for the information Sir. Time to brake out the Miller and make a duel mass a single mass.
@mariussukys7582 жыл бұрын
Agree with other comments quick and simle explaining. Thank you!
@blower13 жыл бұрын
Good video, well explained. So many videos out there that say if there any rotational play then your DMF needs to be replaced. I know that's rubbish - as you have pointed out it's how much play is what matters, brand new ones all exhibit some play before 'hooking up'
@Bumper3D6 жыл бұрын
I just removed the gearbox and clutch on my friend's car and was wondering if it was normal for the flywheel to have so much free movement. It's my first clutch change that involves a DMF so this is exactly the kind of information I was looking for. Thank you very much!
@OskarsKlavins6 жыл бұрын
Bumper3D you are welcome :) www.repxpert.com/ you can register here and get all info you need for your DMF. It is free and no spam after registration.
@TheHairyHound5 жыл бұрын
EXCELLENT video. Informative and no bullsh!t. Thank you :-)
@martintrajkovski16012 жыл бұрын
The best simple explanation on the internet thanks for sharing with as
@kamgamble81215 жыл бұрын
Good informative video thanks for uploading , none of this 20 minutes face time before you even see a spanner
@josepeixoto3384 Жыл бұрын
Best explanatin; i remember my 1995 bmw 318 tds is checked like that,as per the factory manual.
@Tim32256 жыл бұрын
Great video: the free-play measurement method & the old vs new was really very helpful! Many thanks my friend.
@mitchelbarclay80795 жыл бұрын
This video is a good example Not sure why people have put thumbs down on this
@JuhaEerikki3 жыл бұрын
Thank you for this great video! Amazing how there can be a perfect video explaining exactly what you need to know. 👍🏻😊
@salimbouhadjra65592 жыл бұрын
It's fals
@simmov94895 жыл бұрын
Thank you thank you thank you! Great video
@TheBoy0464 жыл бұрын
Excellent video, very clear and informative. Thank you
@roarmller-hansen33116 жыл бұрын
This was a very good video! Good camera/good explanations - straight forward to the point! Thank you very much Oskars! Roar.
@lancestancliffe48854 жыл бұрын
Thanks for a informative video, A great way to test once off the car.
@bw55594 ай бұрын
Excellent presentation!
@vabble64327 жыл бұрын
Deserves more views!
@dzaym7 жыл бұрын
Hello
@caspersulo98525 жыл бұрын
Thanks ..was informing ...
@dualmassflywheeldmfrepair53705 жыл бұрын
kzbin.info/www/bejne/mYLHe2ibgst4hqM
@copyleftaudiobooks94207 жыл бұрын
thanks for the video. i was going to buy a new dual mass flywheel but now i see my own is good.
@mariushalvorsen20374 жыл бұрын
Thank you so much! Really good and easy explanation! It saved me a lot of trouble! Thank you again!
@bandlacingo49695 жыл бұрын
Great video straight to the point thank you.
@dualmassflywheeldmfrepair53705 жыл бұрын
kzbin.info/www/bejne/mYLHe2ibgst4hqM
@MattSmye5 жыл бұрын
Thank you, Oskars. Very useful video. 🙂
@Gviking19803 жыл бұрын
Thank you, I was wondering about that.
@Robyrama765 жыл бұрын
Good video 👍
@jayhiz35146 жыл бұрын
Great job! Best video on DMF
@peterdonaldson76145 жыл бұрын
Very clear explanation. Thank you.
@gazacool66134 жыл бұрын
Thanks for the info, it is really helpful...
@jjsam77786 жыл бұрын
Thanks for the video. You deserve more views !!
@OskarsKlavins6 жыл бұрын
JJ sam you are welcome :)
@andrewthompsonuk16 жыл бұрын
Thanks for the video. I need to decide if I need to use a new dmf. In my case it's almost identical to my new one in play etc. So I may send the new one back.
@58croman7 жыл бұрын
Good explanation. Very clear.
@burrpws19807 жыл бұрын
Thank you so much for this video 👍
@stuartty17 жыл бұрын
fantastic video. Thanks for the upload.
@montoya_garage11 ай бұрын
nice video mate!
@johnmetrac28985 жыл бұрын
Thank you very helpful video 👍
@olsmokey52563 жыл бұрын
DMF bad, SMF good.. that's all you need to know. Replaced mine with a Southbend stage 2 endurance smf clutch kit.
@OskarsKlavins3 жыл бұрын
Just wait for cracked crankshaft :D DMF is not there without reason. And - sometimes there is no conversion kit for some cars.
@19861108Mr7 жыл бұрын
Really appreciate your video thank you so much....
@bobbondarul74486 жыл бұрын
Nice. 👍
@mandeo107 жыл бұрын
Great video...Very helpful.
@anthonygaunt89742 жыл бұрын
Thank you
@varun91704 жыл бұрын
This real example video Thank you
@tomseriksons6873 Жыл бұрын
Paldies vecīt
@t5jerry7 жыл бұрын
great video, thanks very much....
@tiagomagalhaes1009 Жыл бұрын
Perfect!!!!!!.Subscribed
@Andek747 жыл бұрын
Good one Oskars!
@barriejames0073 жыл бұрын
Very good thank you
@MakerTools3 жыл бұрын
Good one thanks!
@rockin3356 жыл бұрын
Roar Oskars. Good info, since I have problems with the DMF on my 1990 ZR-1. Mechanics recommend changing it to a solid?
@airbrushingbynick60716 жыл бұрын
Good effort.
@sasababic67177 жыл бұрын
Thank you maestro.
@johnhunt23884 жыл бұрын
thanks for showing us that.
@actorzone8564 жыл бұрын
I have a Skoda Octavia DMF ZSB06J105266PE, 52000klms, it has 5 teeth play, nothing wrong with the DMF as a wrecked vehicle, the real way to do it would be to bolt it to a fixed plate and use a torque wrench as you want to test spring tension, Manufacturers have test data, its Like testing valve springs certain weight v travel.
@OskarsKlavins4 жыл бұрын
In this video you see method for freeplay, number of teeth depends on vehicle, for example, Volvo D5 engine, freeplay is up to 6 teeth, and it is manufacturer specified. Measuring spring resistance is another story.
@MrBojangles9012 ай бұрын
Nice one
@ghostrider26643 жыл бұрын
good video man. good info.
@KESYL15 жыл бұрын
After four months of using the new SACHS set (clutch, dual mass flywheel), noises started after pressing the clutch pedal. I bought the old 22 years with the course of 300 thousand kilometers, the LUK two-mass flywheel in perfect condition. I wonder if this is the fault of incorrect installation or very low quality SACHS wheels.
@gerard44495 жыл бұрын
Thank you, I have exact same flywheel
@tunertv44334 жыл бұрын
What car?
@dualmassflywheeldmfrepair53705 жыл бұрын
Congratulations already subscribed here.
@TheCreedBratton5 жыл бұрын
DMFs suck. I can't wait to get rid of mine
@AhmedGamal-vm4lr5 жыл бұрын
Great work
@Ventuha6 жыл бұрын
thank you!
@esunayg5 жыл бұрын
very informative thanks!
@IainHC16 жыл бұрын
Good information! Thank you :-)
@marcass1007 жыл бұрын
nice one mate
@janpalmer30256 ай бұрын
Спасибо, почти снял двухмассовый маховик с Renault Traffic 1.6L 2017 года выпуска, уже повреждённый, смешного производителя.
@willthecardude69005 жыл бұрын
Thanks bro, good video.
@rosscampbell66444 жыл бұрын
weld it ..... make a few shims .... that fit between the two parts and weld it together .... have welds at even spaces ....done this a couple of times ... toyota alteeza and porshe cayanne ... dual mess are not nesarse ary
@janpalmer30256 ай бұрын
Paldies, man gandrīz ir noņemts Dual mass spararats no Renault Traffic 1.6L 2017 gads, jau bojāts, smieklīgs ražotājs.
@Messy_Jesse4 жыл бұрын
Greetings, thanks for the video! MK6 DSG GTI, intermittent issue hope you can help. Reverse gear won't engage, this maybe happens once every 400 miles. This has been ongoing for the past couple months. When it happens I turn the car off and back on and reverse works again no problem. Yesterday I found a pool of oil under the car. It's all over my pendulum mount. Pretty sure it's the main seal. I bought new upgraded clutch packs to hopefully solve the reverse issue and a main seal upgraded part. Should I expect a flywheel replacement too? The car has 130k miles on it. Anybody?
@1457px6 жыл бұрын
Brilliant, thankyou
@janpalmer30256 ай бұрын
Thanks, I almost have the Dual mass flywheel removed from Renault Traffic 1.6L year 2017, already damaged, ridiculous manufacturer.
@neodmasceniserviser14807 ай бұрын
Thank you Oscars.
@bobbondarul74486 жыл бұрын
Hy. Nice work. I need some help. Please tell me what that vaccum dose ? I've found the vaccum line down to the egr broken and I don't know for how long it wose like that. Or wen suppose to work ? Because I don't feel vaccum at all on the line. Thank you in advance
@raitshots Жыл бұрын
Next soon video 😎👍Laiks iet .
@madformodz72524 жыл бұрын
Hello mate I have a question,, I've got cluch out my st170 the dmf seems fine I've done wat u did with marking it it only turns past 3 teeth if that?? Also the front plate ther isn't really any play just little movements wat u think thanks steve I've subscribed and liked
@gerrygallant91555 жыл бұрын
Hi.... my astra cdti 1.9 120bhp was having problems starting..[ seemed like battery was draining ] so took it to garage about start up issue... they said my flywheel is knackered and is to blame .... car when started drived fine ... once got it back from garage can hear a big banging noice and clutch is now crunching .... took it back and he said it's the flywheel ... seems odd all this happened after they looked at it or just a coincidence..... can a bad flywheel stop car from starting
@ilhamiyanmaz47436 жыл бұрын
Very good
@wondsint17625 жыл бұрын
Thank you for the video. Is the tolerance problem maintainable?
@tomhernandez13084 жыл бұрын
Thank you, very helpful. I am curious about changing my 2006 BMW Z4 3.0si flywheel from a dual mass to a solid flywheel. I have seen comments that it can impact drivability negatively. Any comments on that aspect?
@a.americandad38853 жыл бұрын
You will likely feel more vibration the dmf was designed to smooth out power impulses from the cylinders. I personally think it's an exceptable traid off.
@R553203 жыл бұрын
Hi Oskar hope you ate fine, can I ask where about your garage please really nice video, or garage name
@OskarsKlavins3 жыл бұрын
It is my private garage, in LV, in my homevillage
@R553203 жыл бұрын
Okay thanks I thought you are in uk!!!
@poleadorfcpole64706 жыл бұрын
verry good video :)
@DinkyDoughnut5 жыл бұрын
Your a Star..*
@lennycook2062 жыл бұрын
If you've already take the it out... Surely you already have a brand new one ready to install? Throw it away FFS
@cihatkomurcuoglu28073 жыл бұрын
hi all , i got land rover discovery td5 and got very heavy clucth and some shaking at clucth pedal , is it dmf failure ?
@robsonncube1608 Жыл бұрын
I changed my mercedes flywhell but it can't start anymore
@hyperactive999996 ай бұрын
how long does a fly wheel usually lasts? & do you have to change it when replacing the clutch
@OskarsKlavins6 ай бұрын
Usually one flywheel goes for 2 clutches. But you always have to check that dmf
@marcusmason34405 жыл бұрын
Thankyou
@bulphead79506 жыл бұрын
hi, i have a problem with mk5 gti dsg when i brake 3 in 2 gear products click noise, this is a problem with dmf or mechatronik?
@bobdolton4505 жыл бұрын
Jeez wear did you get that pilot bearing them? Mine went bad in my flywheel... thinking of calling the dealer
@edkennedy61205 жыл бұрын
these flywheels are a disaster, constantly failing and the car owner pays out again and again, i replace with single mass flywheels and i have never had a fail with any of them.
@bobbondarul74486 жыл бұрын
Can you make a video with the dsg 7 (dq 200) flywheel?
@uptownsamcv7 жыл бұрын
I have a 02 Maxima with 238,000 miles and it seems as if the DMF springs have weakened to the point where taking off from a dead stop feels horrible. has that worn engine mount feeling. I installed energy suspension polyurethane mount bushings so now I'm suspecting that its the DMF. what do you think?
@OskarsKlavins7 жыл бұрын
samuel lopes yeap, i give you 85%, that it is DMF, what is making that noise. My expierence with Volvo V70 - sound was like something want to come out from engine :D