OtterBox Defender Series XT for Galaxy Z Fold6 - Rugged Black Case

[@resevil2396]

Im glad they figured out how to make a folding case. Ive used otterbox defender cases for the better part of rhe last ten years. They arent always cheap, but they are durable enough to justify dropping the insurance plans most carriers offer. Im very clumsy and rough with my devices and never had a cracked screen, even without screen protectors once they stopped being included in the defender cases. Amd ive dropped my phone and gad it get kicked around in moshpits, dropped on concrete and very hard old wood floors numerous times. My only disappointment is that this lacks the 2 layered protection of their normal defender line. Usually there is a hard interior clamshell, then a rubber lining on the outside.

[@theaveragejoebody]

The fingerprint area is deep and harder to get to compared to other cases, but it still works. My complaint is it lifts my Zagg screen protector in spots.

[@doncali7722]

@@theaveragejoebody Same! I thought I was the only one.

[@theaveragejoebody]

@doncali7722 i wasn't sure what to do at first, but it's not horrible. The Zagg has a warranty, so if it gets too bad, I'll exchange it and use another case that I bought. Is yours lifting badly?

[@theaveragejoebody]

@doncali7722 it didn't help that my wife was talking to me, and I put the screen protector on upside-down at first 🙃. I was able to remove it and put it on correctly.

[@doncali7722]

@@theaveragejoebody it is only top right corner for me

[@doncali7722]

@@theaveragejoebody I had best buy put it on for me when I bought the screen protector and it was all fine at first until I put the case on

[@icephatootz]

looks like otterbox finally got a good case

[@latenight11]

I have this case had butter fingers one day and it dropped, the hinge popped off 😂 but thankfully no scratches. I’ve never had a case do that before. The hinge did snap back on

[@FIREWOLFUNBOX]

That's the most important part 😅 as long as no damage on your phone. I guess because of the hinge, they're a little more fragile versus non foldable phones

[@dipplodocus]

It may even been to help you phone that it pops out I'm assuming if when you drop it the part that pops is because maybe it's taking the most of the pressure and then it pops off therefore stopping the force from the drop reaching your phone it happen on my last otter box case fur my surface duo 2 loads but never broke and phone always survived I just assumed it was some sort of thing to alleviate the pressure so it has an escape route

[@Kengo1234]

Only problem I've had is that of the several screen protectors I've tried for the front screen will all start bubbling at the edges since the case pushes on them, would be great if there was a screen cover out there that was just a little smaller dimensions to not touch the otterbox plastic edges.

[@Welcome2theRealWorld.]

You can’t get edge to edge. It has to be a case compatible screen protector

[@deanbeaudoin1718]

I have a spigen screen protector and no problems as far as lifting

[@akammeraad]

Does anyone know if it will work with spigen screen protector?

[@deanbeaudoin1718]

It does

[@Goonsquad2012]

Really like this case probably going to grab it for mine

[@FIREWOLFUNBOX]

Its a solid rugged case 🔥

[@dipplodocus]

Mine came 2 days ago only out it on yesterday after a period of debating I had a spigen tough armor pro p case on z fold loved the built in kickstand is don't have a s pen so the s pen slot it's nice they included it but for irrelevant but the thing that bugs me with the soigen tough armor is the front part of the case the adhesive bit stick and stays but never sits flush like the clip on side does i notice it once opening the fold I can see the silver frame on left hand side but right hand side it's tight and snug the side the clips on it visually bugs me I canf stand the adhesive front part of the case for the z fold 6 but yeah after debating wether to use the otterbox defender xt case because of loosing kickstand I bit the bullet and put it on and just order a wooden portable kickstand which has come and is great to use with the otterbox case one and love when I open the otterbox it all sits flush where you just open the fold and clip it in much prefer one piece case to these 2 Part sticky adhesive cases

[@stefanusirvan5438]

This case is pretty good. I also have one for my Fold 5

[@FIREWOLFUNBOX]

🔥Thanks for sharing

[@angeliaulrich9722]

Is it best to put the screen protector on before the phone is put in to the case?

[@angeliaulrich9722]

Can a magnet be put on the case so it will attach to the car holder?

[@kk_itsover]

hi i bought the same case today. however my existing tempered glass did not fit. what tempered glass are you using for this case?

[@deltaflyguy3921]

Would love to know this myself i have the torras case and screen protector doesn't fit and is lifting so want a case with protection when installed in screen protector

[@kk_itsover]

@@deltaflyguy3921 ended up putting on a invisible shield plastic protector. instead of tempered glass

[@jakeMTSU]

I went with the thin clear one, its just nice and adds a bit of protection... but i have had the defender forever on my s22 ultra and it was great... just don't like the hinge bulk... of course some protection loss there

[@AngryTomTom]

can i add something on the back to hold for finger and horizontal angle ?

[@kk_itsover]

none

[@penguinyt5307]

How do I remove this case 😭

[@MattHikesHills]

Figured it out yet? Just put this case on mine.

[@MattHikesHills]

Ahh, push it out from the camera.

[@DJlokoShred]

Do you think dust or durt can get through it when close? I travel to areas with lots of dust lol

[@FIREWOLFUNBOX]

It probably could since its not like its completely sealed off

[@keepit100tho]

It is definitely not dust proof. You might want to to keep your phone in a pouch or something.

[@WowzersMowzers]

Do you have any issues using the finger print reader?

[@IvanSchob]

Yes i do

[@bigmaxcc]

No working perfectly 😎

[@jesuscervantesj82]

The fingerprint area is raise too high. So I'm pretty sure there is going to be problems using it. The case I got for my phone has been really perfect.Comes with a built in kickstand and also has a silo four the s p pen which makes it more useful, then the otterbox

[@doncali7722]

I got mine today and no issues so far with it.

[@Rseg7]

Thanks for the cases review! I'm waiting on my fold 6 crafted black I have two more weeks to go according to samsung website

[@FIREWOLFUNBOX]

You're welcome ! I'm glad you found the video helpful 🔥

[@jakeMTSU]

mine said the 7th aug but shipped and showed on the 28th july... the buds 3 pro still have not shipped... says 14th of aug ... ultra watch was at my door on jult 24th LOL... so 3 trips to fed ex is not great..

[@Rseg7]

@@jakeMTSU Got my fold 6 yesterday in the mail! and today I'm picking up my ultra watch in the mail after work! I'm on the same boat with the buds pro 3...still waiting

[@jakeMTSU]

@@Rseg7 i preordered all, buds 3 pro last to show up, shows aug 14th for me

[@teeknowstech]

Fire wolf what screen protector are you using on the zfold

[@FIREWOLFUNBOX]

No screen protector on the front screen 😅

[@AngryTomTom]

Is there cushion inside the back case ?

[@omoa5735]

No

[@nik_5561]

What screen protector are you using on the inside screen??

[@captainvaughn2871]

Is this case mag safe compatible?

[@TheIReynoldsI]

Did you even watch the video? Lmao

[@captainvaughn2871]

@@TheIReynoldsI well yeah. It works for wireless charging but I wanna make sure it’s mag safe. Thx for commenting for nothing

[@TheIReynoldsI]

@@captainvaughn2871 you can clearly see that his MAGSAFE charger does not stay attached to the case.

[@captainvaughn2871]

@@TheIReynoldsI I'm talking about putting that mag safe sticker on it

[@TheIReynoldsI]

@captainvaughn2871 well I apologize. i did not even know that was a thing lmao. I always buy cases that already have that built into it.

[@donnytruong9899]

Is this available at Walmart

[@jesuscervantesj82]

Wonderful. Review. The case looks amazing. But honestly, I wouldn't say it's for me because I like blue. My case is what a useful hinge. As i am an s pen user and I need to have a silo to store my pen into so the case I got on amazon has been amazing, with my blue navy, fold six

[@FIREWOLFUNBOX]

Thanks for the feedback 🔥 hopefully they add more colors but I'm glad you found a case you liked

[@omoa5735]

It comes in blue on the website. It's a lighter blue though, that's the one I have

[@deltaflyguy3921]

What case did you get

[@omoa5735]

@@deltaflyguy3921 the same case but in blue

[@angeliaulrich9722]

Is it best to put the screen protector on before you put the phone in the case of afterward? I'm not using glass but a film protector. Thanks. Good install video

[@jvcarter21]

For some reason I am seeing really bad reviews about this case. Complaints about the front screen not being usable and things like that. How has this case been holding up for u?

[@FIREWOLFUNBOX]

front screen is usable and the case is great for those that need that added protection. I personally prefer a slimmer case, so the Thin Flex is better for me. Maybe the bulk is what the complaint is about ?

[@MeadstheAlmighty]

I've been having issues typing on the front screen whilst using the Samsung spen case. The raise edges make sides narrow.

[@jvcarter21]

@@FIREWOLFUNBOX people keep saying also it doesn't close all the way? Have u experienced that with yours? and how is the case holding up overall for you?

[@jameshall2989]

Did the case scratch the hinge on your phone. Overall, how did you like the case.

[@FIREWOLFUNBOX]

Did not scratch the hinge. Overall for me personally, I prefer slimmer cases so something like the Thin Flex is better for me. I would want this case if I'm exposed to constant drops or rugged environments

[@donniethesportsguy893]

Holy crap that’s a tank 😂

[@kk_itsover]

it is. but i love mine!

[@OMGGITSDAVID]

The camera protection could have been better

[@karlhilp1072]

$100 basically... That is insane

[@resevil2396]

These cases are also super durable though. Enough to elimiate the need for an insurance plan on your phone. My galaxy s21 ultra has one and has been dropped and kicked around moshpits on concrete floors and still come out unscathed. Edit: actually that was probably my galaxy note 9 but the case is basically the same between both models. Ive used these cases for a decade now and they have always been absolutely perfect.

[@fudgeinator]

90$ but worth for a phone like this.

[@spiraldynamics6008]

S Peeeeeennnn

[@Unknown94731]

Too bulky

[@louiereyes8658]

Too thick I'll pass

[@FIREWOLFUNBOX]

Yeah, lil thick 😅 you might prefer the thin flex from otterbox

[@MattHikesHills]

Go bulky and save that expensive phone. It's a shame it hides the sleek beast, but the 6 is a delicate device.

[@wentoneisendon6502]

​@MattHikesHills did you not get the free year of samsung care+ with the promotion? I can't bring myself to put a case on the fold 6, it's absolutely gorgeous

[@MattHikesHills]

@wentoneisendon6502 I got insurance with my network. It's a shame to cover the phone but it's a slippery thing, especially when unfolding. The case makes it a lot easier to unfold.