The knowledge here is amazing and the experience in platform shows! You need to make more videos, maybe about searching parts and buying parts ect...you could dominate KZbin! 🤘
@volkswagon92vr4 жыл бұрын
I went single turbo conversion w/2.8 heads ,liquid to air, duel fuel pumps. Should be on the road in few wks.... still im 100% regretting not going for the vr swap. Very nice job on the cars guys
@dhanssolo2 жыл бұрын
My b5 a4 1.8t (ATW) has 215k miles on it. Im thinking of fitting a 4.0 w8 in whenever the engine completely goes. This video is inspiring
@sanjincattunar68595 жыл бұрын
Thanks again guy's for doing this video and get time to explain in short terms, even if im from Europe, Croatia 🇭🇷 to be exact, and i have some issue with imperial to metric system isn't such a big deal, there's always google 😉. But for real, keep up with good work and many more news,updates, tour event's, it's all good information. Just film some from dyno tuning and similar if it's not too much to ask for! Big regards from Rijeka, Croatia 🇭🇷 Malaka G & S
@MalakaMotorSports5 жыл бұрын
Sanjin Cattunar 🙏🙏🙏🙏🙏
@JuergenGDB4 жыл бұрын
I had a 2004 VR6... strong engine.. had Neuspeed 70mm exhaust, DP... sounded great.. again it was a very reliable strong engine.
@63Mrnova2 жыл бұрын
Great job 😊 Keep moving forward is the goal, and always learning on the way.
@mk3whitewide5 жыл бұрын
Love me some vrt. Silver one is sweet but that red one is extra sweet looking.
@2fast2255 жыл бұрын
2.5 Swap / 5 cyl 07k B5 Swap coming on the channel soon?
@gnarshread5 жыл бұрын
Yes!
@rype365 жыл бұрын
I've stalled on my 07k b5 swap...just gonna go 12v vr6
@2fast2255 жыл бұрын
856XerXes some people in Arizona were gonna do a 07K swap with Iroz, don’t know what happen with that..
@balcyvr65 жыл бұрын
Please someone do a vw 5 cylinder turbo swap build! I can't do it and I've been trying to find good ones for a couple years lol
@Lp22-b1u5 жыл бұрын
@@balcyvr6 check Alm Racing kzbin.info/www/bejne/pmqbc5mbmrOtr9E
@darius95215 жыл бұрын
I like that you guys have different setups and sticking to it
@ocavant4 жыл бұрын
No heater and no A/C= Race Car Great builds guys. Would this conversion be possible with heat/AC?
@danny_vrsociety5 жыл бұрын
Loving the VR content, malakas! Can't wait to see them rippin' again.
@perez136915 жыл бұрын
Im so happy to have found your channel 🙏🏽🙏🏽🙏🏽🙏🏽 not alot of support in my area for the do it urself guys that work on Audis i have 93 s4 2.2 5banger needing a new turbo u have inspired me to get to wrenching. This vr6 is a badass build💯 much love from Ft Collins Colorado..
@89foxguy5 жыл бұрын
👌👌 Man I'd love to do this swap I just don't know, it's over whelming.
@ssjrockooo14072 жыл бұрын
You guys made me enjoy the process and progress on the vr6 b5’s that I want to do a vr6 swap on a b8 a4 in the future
@cannabis_culture5184 жыл бұрын
Really informative guys !!!!!
@MalakaMotorSports4 жыл бұрын
Glad you think so!
@Jolinator5 жыл бұрын
Tremendous video.
@TurboDub19912 жыл бұрын
You guys don't play no games! Excellent cars
@cruzanlusion91595 жыл бұрын
I love it u should get way more views
@RetreatHacker Жыл бұрын
Wow, just started exploring vr6 swap
@blairarmishaw73295 жыл бұрын
Hi, I love your videos, I have a A3 3.2 vr6 Quattro, I want to turbo it , so your videos do give me some good ideas, but can you give more information about the good and the bad of a product, etc why you buy it, why it did not work as you thought, the change , the price , where you got it from. We all go through a learning curve, it would be nice, if we didn't need to go through the same mistake. And yes more links, turbo , exhaust, pump ,computer, any parts you talk about that are different.Ok thanks .
@mateuszb.40115 жыл бұрын
My mechanic did 2,8 VR6 2009 TT (and increased it to 3,0 later) and turbod it(garret r36). The only problem he had was that at high boost when a big torque came up the trans used to deattache. So he just bolted some rails to the frame and now trans just gets blocked by those and doesn't move anymore
@dannycoultas265 Жыл бұрын
Been waiting time to see the b5s again love the vrs3 but my heart lyes with the old school
@gnarshread5 жыл бұрын
Great video guys!
@justint56252 жыл бұрын
I had a 93 Corrado VR6 superchargered Z1 engineering with borla exhaust and kw coil overs. Also never dropped the compression man did that car go💨
@AudiSportWagon5 жыл бұрын
Thank you for this knowledge! Much love from Austin,Texas! 🍻
@harp_attack5 жыл бұрын
Thanks for the parts list. I'll be starting my VR6 project soon and this will help a lot. :)
@gregs90quattrocoupe5 жыл бұрын
Nice, George and Stav.
@jessevasquez27744 жыл бұрын
Looking good guys 👊🏻
@mrAudisubaru5 жыл бұрын
Really like the 24V VR6 but would prefer the oem instrument cluster and ecu like it is set up on the 12V.
@FrenchJohn5 жыл бұрын
Giving me ideas for my next project. Thanks for sharing guys ;)
@jdubayou94985 жыл бұрын
Way back I had a 2001 mrk 4 gti with a vr6 and a vf engineering’s vortec super charger kit and it was slow 14.8 was the best I got but the car ran forever
@jdubayou94985 жыл бұрын
Idk probably slow slow never ran it stock
@jasonsands58234 жыл бұрын
Do you guys think this would work in a a B5.5 Passat Wagon? What you have done looks amazing!
@shakejunt70365 жыл бұрын
So why would the vr6 be better than a 2.7t? I mean just the simple fact that you can go single turbo? Or is the engine better overall???
@rayhitz56663 жыл бұрын
Any videos on the difference in diverter valve and custom blow off valves? How to install the custom blow off valve, where and can you use both or take out the diverter??? Help
@craigferguson20575 жыл бұрын
Damn good video 👍🏻
@masonpugh36375 ай бұрын
Great video
@jasonwillis74135 жыл бұрын
Stav is gorgeous He’s a dime piece
@biggaG755 жыл бұрын
How does it compare to the rs3? Wouldn't mind seeing them up against each other..
@America_Countryhumans1 Жыл бұрын
Sick strut brace
@billasohyeah5 жыл бұрын
What is stav's 12v hp? Love your vr6s. Amazing.
@pimpslayer91092 жыл бұрын
Love to see this
@alien_brain4 жыл бұрын
dang yalls cars are fricken dope
@jerrycaille3 жыл бұрын
Great work !
@waca2023 Жыл бұрын
The wine red Audi has a much more efficient and straight forward cooling system. Have misgivings about the early 12 valve VR6s - light cam bearing cap design, unusual engine wobble at idle, oil pressure issues 😢. But it was still a good engine if taken care of. The 24 valve VR6 is a total FREAK! It's like a Kardashian Woman: beautiful and athletic, but hot headed, expensive, and temperamental. Btw - both girls get pissed off if you ignore them. Jason Wampler
@balamramos41015 жыл бұрын
Please check your grey dog's left ear. The other dog was smelling it for a bit and he was scratching it... maybe ear mites.
@thedetaildad96885 жыл бұрын
Definitely interested in the links ! Haha can’t seem to find the motor mounts on the 24v :)
@fredjones53275 жыл бұрын
Damn guys absolutely amazing!!!!
@georgemerino47824 жыл бұрын
Damn I remember Justin’s white car beast!
@justint56252 жыл бұрын
Looking good boys 🤙🤙🤙
@RATDATSUN5 жыл бұрын
13:05 "Open Dump" Thats hawwt
@SweetWrapsGarage9 ай бұрын
If you don't mind me asking what's the range of cost for a swap like this? Blew the motor in my b5 that I just did maintenance on 40k miles ago and want to make the change.
@stevenharpervw5 жыл бұрын
Hey! I’m just building a Vr6 corrado. Totally standard, engine is a AAA from a mk3 I wired fuel to the battery and the engine does start and runs, when I connect it to pin m2 so the ecu can control and prime the pump it does not work, I have pin 30 and 30b with a jumper wire. Relay 12 all wired correctly, and tested it is working M2 for powering fuel pump connected. And not working. I know the ecu grounds the signal wire to turn on and off the fuel pump, am I missing something else or an extra ground etc??? Looked on line but no one can help me .
@AudiophileTubes5 жыл бұрын
So, is this going to be your fastest Audi project to date? What is the HP and torque of that beast, when you're done?
@TJR321004 жыл бұрын
How about that radiator core? Can you tell us more about it? Thanks.
@doublevanoz5 жыл бұрын
Looks like a hudge process. I over the vr... But is it worth it, what's the benefits, or is it a passion thing?
@captainsledge7554 Жыл бұрын
I really wanna know what exhaust they have in clip 3 that made the car sound like an exotic 6cyl
@sellingthewind5 жыл бұрын
hahah you guys are insane. love this
@bamgohardgamingok85543 жыл бұрын
Hey fellas..I have a 2002 Audi A8 an I love the car and want to make it fast a little at a time..I’m not swimming in money..lol I would like to pick your brain on steps to take..I don’t know how to message on here
@A4TuRbO135 жыл бұрын
Sad that these motors are so underrated and overlooked outside of the VAG community.
@humblebeginnings34195 жыл бұрын
Keep the videos coming 👍
@johnreynolds22405 жыл бұрын
maybe use a TDi fuel return cooler rad under the car.........for the water/intercooler
@jamest51494 жыл бұрын
A water to air intercooler isn’t anywhere near as efficient as a air to air intercooler... where you gain is you can drop some ice in the tank to pull down IAT’s... this is only suitable for drag races and 1/2 mile events etc where the runs are very short. Track or road use the air to air is king.
@nathanpettey756810 ай бұрын
Do u guys have any non high horse power builds. Like a reliable daily
@MrRaybj3 жыл бұрын
What did you use for the radiator mount frame? I'm going to try to put a Mishimoto universal radiator in my b5 a4?
@jeremyswingle4752 Жыл бұрын
I can't find the coolant pipe your talking about do you have a number for it?
@mateoarellano31935 жыл бұрын
Bro I’m thinking about getting a 2000 a4 b5 what should I look for? Like con wise. Pls make a video for how much a vr6 cost
@cryptoholic56765 жыл бұрын
Vr6 swap better than 4.2 v8 swap? Or which one is easier for a first time build.
@J4YMIAH5 жыл бұрын
You guys are awesome!! Love the 12v vr6!!!
@freebird44504 жыл бұрын
superb
@dariuscarpenter72114 жыл бұрын
what front clip are you guys running? custom build?
@davidwright33903 жыл бұрын
Why did you swap the 2.7 v6 for the vr6 just out of curiosity
@cbr600f478417 Жыл бұрын
Bro idk if u even check these but im trying to do a vr6 swapped to my 2012 audi a3 do u have a guide
@mk3gtidriver5 жыл бұрын
Vr6 beasts 😎👍🏼
@jomamasfavor85 жыл бұрын
This is awesome! you guys said you had some work done in vegas, so I was just curious where are you guys from?
@jomamasfavor85 жыл бұрын
Lol jk later in the video you said California
@MalakaMotorSports5 жыл бұрын
Joseph Garay we are originally from NY. Born and raised.
@t1bud424 жыл бұрын
Could you turn that 90• fuel fitting and run the fuel line under the plenum?
@fakealexstrong5 жыл бұрын
I love you guys. 🤙🏽
@davidl24735 жыл бұрын
that hibiscus looks very familiar
@christopherdewdney75655 жыл бұрын
Yaay VEMS
@JuanBrolo3 жыл бұрын
Hey guys I keep having so many issues with my 1.8t a4 ultrasport and I am wanting to swap a different heart into it. Do you think the ve 2.5 5cyl with a turbo or a vr6 3.6 fully bolted would be better I want to keep ac and can make custom lines
@MalakaMotorSports3 жыл бұрын
Vr6 all the way
@JuanBrolo3 жыл бұрын
@@MalakaMotorSports what is the best vr6 to fit into the b6 chassis I've put alot of work into this car. Full b7 s4 interior swap, koni coil overs, carbon side skirts, oem b7 rs4 wheels no spacers with a perfect tuck. I really don't want to get another car I haven't seen many b6 as clean as this car so a new engine type is a must 1.8t is just garbage and sounds like a pissed off Honda. I thought about a vw 2.5 built turbo but if a vr6 is easier and tuning would be easier I will go this direction.
@fusemalaysia840 Жыл бұрын
🙏 thank you for global cast for unchain me...
@DustySteel5 жыл бұрын
Are your cars rwd like the car on the dyno?
@miguelarturofrias231711 ай бұрын
What gearbix bell housing works for the b5
@36DAMZ4 жыл бұрын
Which is best 12v or 24v or is it personal preference
@audi_steve83633 жыл бұрын
How much would a build like this cost? Also have this been done on the B8 models ?
@ricardohay465310 ай бұрын
Who did the turbo header?
@1609-d6c2 жыл бұрын
what transmission did you use?
@davidl24735 жыл бұрын
are you guys on Audizine or Quattroworld?
@RATDATSUN5 жыл бұрын
9:24 I wanna know more about that dog!
@rexmemore3 жыл бұрын
whats the estimated cost of vr6 swap in an a4 b6 if i already have the engine?
@arablues41425 жыл бұрын
Need vr6 swap....
@jamest51494 жыл бұрын
You can drop the word ‘slash’ verbal communication, a sentence were you list the options works fine with out, leave slashes (/) for a written list 👍
@TheMikeownsyou4 жыл бұрын
How much was this build??? I wanna do that to mine! 😍😍😍
@EricvZ19675 жыл бұрын
I didnt do a swap, and still have an Audi with a VR6.. :P
@Channel_V20175 жыл бұрын
What Trans you running? Thanks
@BarrioHoncho Жыл бұрын
tryna do this in my b7
@pimpslayer91092 жыл бұрын
First car is a 1996 a4. I cannot find the will to part with this thing
@FFerPedroMack Жыл бұрын
you guys are dope
@MalakaMotorSports Жыл бұрын
Thank you so much
@nickovdub61315 жыл бұрын
What's the reason you chose thre vr6 over the standard 2.7 V6?
@cruzanlusion91595 жыл бұрын
Easier to fix I would say when it time to change the timing chain and turbos..it alot of work
@zmeyrs62835 жыл бұрын
So .....is that rs4 cluster for sale?
@TheClimber135 жыл бұрын
I need 2.7t crank main bolt torque specs anyone?
@MartiGTR4 жыл бұрын
What is the benefit switching from a 2.7 bi turbo to a vr6? And is a vr5turbo a good idea as well?